Telink 8258 Dongle Specification PS-19012802-E1 Ver 1.0.0 Keyword: Features; Pin layout; Mechanical dimensions; Pin connection; Electrical specifications; Reference design; Brief: This document is a specification for Telink 8258 Dongle.
Telink 8258 Dongle Specification Published by Telink Semiconductor Bldg 3, 1500 Zuchongzhi Rd, Zhangjiang Hi-Tech Park, Shanghai, China © Telink Semiconductor All Right Reserved Legal Disclaimer Telink Semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function or design. Telink Semiconductor disclaims any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.
Telink 8258 Dongle Specification Revision History Version Major Changes Date Author 1.0.0 Initial release 2019/1 HZF, LX, Cynthia PS-19012802-E1 2 Ver1.0.
Telink 8258 Dongle Specification Table of contents 1 2 3 4 Product Introduction .............................................................................................. 5 1.1 General description.......................................................................................... 5 1.2 Key features ..................................................................................................... 6 1.3 Mechanical and PCB fabrication Specifications ......................................
Telink 8258 Dongle Specification Table of figures Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Block diagram ........................................................................................ 5 TLSR8258 Dongle photo ........................................................................ 6 Mechanical dimensions ......................................................................... 7 Pin layout for GPIO interface .................................................
Telink 8258 Dongle Specification 1 Product Introduction 1.1 General description The TLSR8258 Dongle, which is based on Telink TLSR8258F512ET48 chip, provides a Bluetooth LE wireless system. The TLSR8258 Dongle integrates a power-balanced 32-bit MCU, BLE /2.4GHz Radio, 64kB SRAM, 512kB internal Flash, 14bit ADC, 6-channel PWM, flexible GPIO interfaces, and nearly all the peripherals needed for IoT (Internet of Things) and HID (Human Interface Devices) application development (e.g.
Telink 8258 Dongle Specification 1.2 Key features Bluetooth 5 Compliant, 1Mbps, 2Mbps, Long Range 125kbps and 500kbps 2.
Telink 8258 Dongle Specification Figure 3 Mechanical dimensions 1.4 Pin layout Figure 4 PS-19012802-E1 Pin layout for GPIO interface 7 Ver1.0.
Telink 8258 Dongle Specification Table 1 Pin definition Pin No Dongle Pin Name Chip Pin Name Description J5 1 TL_A0 PWM0_N/UART_RX/PA<0> 2 TL_D7 UART_TX /PD<7> PWM0 inverting output / UART_RX / GPIO PA[0] UART_TX / GPIO PD[7] J9 1 2 TL_C3 TL_C2*1 PWM1/UART_RX/I2C_SCK/XC32K_I/ PC<3> PWM1 output / UART_RX / I2C serial clock / (optional) 32kHz crystal input / GPIO PC[3] PWM0/UART_TX/I2C_SDA/XC32K_O/ PC<2> PWM0 output / UART_TX / I2C serial data / (optional) 32kHz crystal output / GPIO PC[2]
Telink 8258 Dongle Specification 2 Pin Connection Guide 2.1 Supply power There are two methods supported to supply power for the TLSR8258 Dongle. 1) Supply power via battery: Connect PIN1 and PIN3 of J6 with GND and 3.3V of power, respectively. Note: There is no need to connect any header with jumper cap. Make sure the cap is removed from J8. 2) Supply power via USB interface: Make sure one jumper cap is connected on J8 of TLSR8258 Dongle. Connect the USB interface of the TLSR8258 Dongle with PC USB.
Telink 8258 Dongle Specification 2.2 Download firmware To download firmware into TLSR8258 Dongle, first make sure the TLSR8258 Dongle is supplied with power normally (please refer to section 2.1). Then connect J6 PIN2 (SWS) of the TLSR8258 Dongle with SWM of a burning EVK (TLSR8266BR56). Meanwhile, connect the miniUSB interface of the burning EVK with PC USB. 2 J6 Connect PIN2 with SWM of TLSR8266BR56 Figure 6 PS-19012802-E1 Connection chart to download firmware 10 Ver1.0.
Telink 8258 Dongle Specification 2.3 Test RF signal To test RF signal of TLSR8258 Dongle, first make sure the TLSR8258 Dongle is supplied with power normally (please refer to section 2.1). The J1 should be connected with a spectrum analyzer via a RF cable (supplied by Telink). Connect J1 Connect spectrum analyzer J1 Figure 7 PS-19012802-E1 Connection chart to test RF signal 11 Ver1.0.
Telink 8258 Dongle Specification 3 Electrical Specifications 3.1 Recommended operating condition Table 2 Recommended operation condition Item Sym. Min Typ. Max Unit VDD 1.8 3.3 3.6 V Condition battery as power supply Power-supply voltage USB as power VBUS 4.5 5.0 5.5 V supply Operating Range Temperature TOpr -40 85 o C 3.2 DC characteristics Test Condition: All tests below are done at room temperature (T=25℃) and 3.
Telink 8258 Dongle Specification 3.3 RF performance 3.3.1 Receiver sensitivity Test equipment: BLE- CMW500 DUT FW: BQB binary file Table 5 BLE Receiver Sensitivity*2 BLE PHY Frequency (MHz) Packet Type Packet Length RX Sensitivity (dBm) 2402 1Mbps 2440 -98.9 PRBS9 37 -98.9 2480 -98.6 Table 6 IEEE802.15.4 Receiver Sensitivity*3 Frequency (MHz) RX Sensitivity (dBm) 2405 -100.2 2450 -99.7 2480 -102 3.3.2 PHY performance BLE test equipment: CMW500 IEEE802.15.
Telink 8258 Dongle Specification Table 8 Frequency Deviation (Drift) Frequency Δf1avg Δf2avg (MHz) (kHz) (kHz) Frequency 2402 248.00 232.00 0.94 Deviation @ BLE 2440 248.00 228.00 0.92 1Mbps 2480 249.00 229.00 0.92 Frequency 2402 488.06 448.34 0.92 Deviation @ BLE 2440 496.34 454.56 0.92 2Mbps 2480 483.67 442.59 0.92 Item PS-19012802-E1 15 Δf2/Δf1 Ver1.0.
Telink 8258 Dongle Specification 3.3.3 Radiation performance DUT: C1T139A3_V2_0A DUT FW: EMI binary file Test condition: 3.3V, 25℃ Test equipment: FSQ26 Match network: See Table 10 BOM table Table 9 Test result No. Test Result Test Items FCC (DUT FW: EMI binary file) Tx Band Limit 4 Frequency 30MHz ~ 2400MHz 2483.5MHz ~ 25GHz - dB@100kHz -38.3 -37.9 - Pass TX Mode Harmonic (Radiated), Peak 5 Frequency 4900MHz 7350MHz 9800MHz dBm@1MHz -42.9 -44.8 -46.
Telink 8258 Dongle Specification 4.2 PCB layout Top view Bottom view Figure 9 PS-19012802-E1 PCB layout 19 Ver1.0.
Telink 8258 Dongle Specification 4.4 32kHz XTAL The TLSR8258 Dongle supports 32kHz external crystal oscillator (corresponding to PC2, PC3). FCC STATEMENT This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.