rev.1.0 / 2019.06 MTBLE-01 BLE Wireless Module User Manual Telepower Inc. .
rev.1.0 /2019.06 Table of Contents End-Product Label ................................................................................................................ 1 FCC -USA .......................................................................................................................... 1 ISED(IC) - CANADA ......................................................................................................... 2 Japanese Radio Law - JAPAN ........................................................
rev.1.0 /2019.06 FCC ID: WQYMTBLE1 IC: 21887-MTBLE1 Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification (See Section PCB Layout below). This device complies with below part 15 of the FCC Rules.
rev.1.0 /2019.06 ISED(IC) - CANADA Contains IC: 21887-MTBLE1 Japanese Radio Law - JAPAN 007-AH0099 -2- © 2019 Telepower Inc.
rev.1.0 /2019.06 End-Product Manual The following statements must be described on the user manual of the host device of this module; FCC –USA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) Thisdevice may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
rev.1.0 /2019.06 Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’ISDE puisque cet appareil a une niveau tres bas d'energie RF. Japanese Radio Law - JAPAN 007-AH0099 This product has acquired "Construction Design Certification" (Article 38-24 Paragraph 1 of the Radio Law). -4- © 2019 Telepower Inc.
rev.1.0 /2019.06 Overview Integrated antenna Availablefor surface mounting It corresponds to UART, SPI, I2C bus. Specification Model MTBLE-01 Dimensions W 10 * D 19.9 * H 2.4 mm Serial communication UART, SPI, I2C Power supply +2.0V to +3.45V dc Transmission output -1±1dBm (Time Average) Frequency-shift keying 2-GFSK Technology BLE Other(s) Lead free / RoHS Compliant -5- © 2019 Telepower Inc.
rev.1.0 /2019.06 Pin Assignment PIN No.
rev.1.0 /2019.06 Dimensions Dimensions are in millimeters. -7- © 2019 Telepower Inc.
rev.1.0 /2019.06 PCB Layout Dimensions are in millimeters. Soldering Recommendations This module is assembled using J-STD-020. standard lead-free reflow profile IPC/JEDEC The module can be soldered to the host PCB using lead-free solder reflow profiles.
rev.1.0 /2019.06 REVISION HISTORY 1.0 June 04, 2019 This is the initial released. Telepower Inc. 3F Goto-Bldg., 2-11-9, Minami-ikebukuro, Toshima, Tokyo, Japan 03-6907-8511 www.telepower.jp ・The information contained in this document is subject to change without notice. ・Telepower has used reasonable care to ensure the accuracy of the information contained in this document.