User's Manual

ManualsBrandsTELEPORTIVITY ManualsElectronicsFONECOM Video Intercom 10

Debian11

User manual

Ver：

V1.1

Date：2022-10-12

This manual is applicable to the product model：FONECOM-10

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation. If this device does

cause harmful interference to radio or television reception, which can be determined by turning the device off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the device and receiver.

--Connect the device into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the

user's authority to operate the equipment

Radiation Exposure Statement

The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm fro

m all persons and must not be co-located for operating in conjunction with any other antenna or transmitter.

Summary of content (18 pages)

PAGE 1
Debian11 User manual Ver：V1.1 Date：2022-10-12 This manual is applicable to the product model：FONECOM-10 This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 2
Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d'interférences. (2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil FCC warning： This device complies with Part 15 of the FCC Rules.
PAGE 3
Preface Dear users: Thank you for choosing our products! In order for you to use this product conveniently and quickly, we have provided the user manual with you. You can obtain information about the product introduction and instructions. Before using this product, please carefully read all the materials provided with us so that you can better use this product. During the preparation of this manual, we are very serious and rigorous. We hope to provide you with complete and reliable information.
PAGE 4
points for attention 1.please read this manual carefully before using this product; 2.please keep this manual; 3.please place this product in a safe and stable place to avoid falling and injuring people; 4.The operation Temperature of this product is about -30° C ~ 70 ° C, and the relative humidity is 20% ~ 80%. Do not put it in a high-temperature or humid place; 5.Avoid collision between the machine and rigid objects, which may cause scratch or damage to the machine; 6.
PAGE 5
Specific operation and common functions are described as follows: 1 Power on and off  Power on：Plug in the adapter, and then insert the DC head into the machine. The system is powered on and enters the startup process. The startup logo is in the startup process, as shown below: After that, the system enters the default main interface.  Shut down：Unplug the DC head or unplug the AC line of the power adapter to directly shut down the machine.
PAGE 6
2 Desktop After the system is started normally, you can see the Debian 11 system desktop, as shown in the following figure:  The default system desktop consists of: Recycle Bin, start menu, file manager, web browser, display desktop, desktop switch, taskbar, notification bar, etc.
PAGE 7
shut down, log off, restart, etc 3 Start menu operation Click the start menu bar in the upper right corner of the desktop ，Pop up options are shown in the following figure: Use your finger to move the screen up and down to find and click ,You can perform some basic operations such as system settings and time functions.
PAGE 8
Select relevant items to perform corresponding operations, for example:  Wi-Fi  Network  Bluetooth  Background  Notifications  Applications  Sound  Power  Displays  Date & Time  Users, etc 8
PAGE 9
5 Date and time setting Click select ，Enter the date and time setting interface as shown in the following figure: Click The pop-up window is as shown in the following figure: Enter the password in the blank column on the right of the password in the figure above: "1234" can change the time and date after unlocking, as shown in the figure below: 9
PAGE 10
The pop-up time zone selection map is shown in Click the following figure: Click the city of the corresponding country and region on the time zone map to complete the time zone setting,Click Click the on the to close the time zone map.
PAGE 11
automatically determined by the time provided by the network, or manually adjusted. Click the corresponding clock number on the the time by using the keyboard or clicking Click the on the right of to change and with the mouse. right side of to change the month, Click right side of to change the Year, Click on the on right side of to change the day, Click 6 to exit the date setting window. WiFi and Bluetooth wireless connection 6.
PAGE 12
In the figure above, you can see the list of WiFi router signals. Click the corresponding WiFi signal name and enter the password to connect to the WiFi network.
PAGE 13
6.
PAGE 14
Click to search for available Bluetooth devices nearby, as shown in the following figure: Select the Bluetooth device to be paired, and click，As shown in the following figure: 1
PAGE 15
Remember the pairing code, click ，And input the same pairing code on the Bluetooth device to be connected at the same time to perform Bluetooth connection with the device.
PAGE 16
8 Local media playback Click the click Click in the lower left corner of the desktop, then ，The pop-up window is as shown in the following figure: and then click in the upper left corner of the pop-up player window, and the following window will pop up: Click the corresponding folder name on the left and right of the window above to find the media file to be played, for example, the following figure opens "Test Video.
PAGE 17
This completes the introduction of common functions of fonecom-10. For other functions, please get help from this website: https://help.gnome.
PAGE 18
9 Troubleshooting a) Slow or incorrect touch screen response • • • • • • If the touch screen is fitted with a protective cover or optional accessories, the touch screen may not work properly. If you wear gloves when touching the screen, your hands are not clean, or touch the screen with sharp objects or fingertips, the touch screen may malfunction. Please contact the customer service center. The touch screen may malfunction in a humid environment or in contact with water.