User Manual and Instructions for the US Telecell 2 Technical Note CDox Original Author: Mike Martindell Other Authors: [free text field] CDox Latest Issuer: Mark Bailey Issue Date: 2017-11-16 Document Ref: TL-004391-TN Issue 3 User Manual and Instructions for the US Telecell 2 TL-004391-TN Issue 3 © Telensa Ltd 2017 Operational Safety Notices Page 1
User Manual and Instructions for the US Telecell 2 TL-004391-TN Issue 3 © Telensa Ltd 2017 Operational Safety Notices Page 2
Notices This document is provided to you by or on behalf of Telensa Ltd. © Telensa Ltd 2017. The documentation and any software described herein and/or provided to you in conjunction with this documentation contain proprietary and confidential information of Telensa Ltd and may only be used subject to a license agreement containing restrictions on use and disclosure. They are also protected by copyright, patent rights and other intellectual and industrial property laws.
Table of Contents 1 Operational Safety Notices ........................................................................... 5 1.1 Installer ........................................................................................................... 5 1.2 Power Supply .................................................................................................. 5 2 Product function............................................................................................ 6 3 Telecell Variants ...
1 Operational Safety Notices 1.1 Installer Installers must be suitably trained and qualified for electrical work, according to the laws and local codes for the locality and country where the unit will be installed. This unit must only be installed by personnel that have been trained by Telensa or their representatives to carry out this work. 1.
2 Product function The Telecell is a radio controlled device and will only function as part of a Telensa Central Management System (CMS). Telecells are assigned to a specific CMS and cannot be transferred to another CMS without being re-assigned by Telensa. The Telecell operating program is set by the CMS and dusk/dawn lamp switching is remote controlled over the radio link by the associated CMS base stations.
3 Telecell Variants There are two key variants of the Telecell 2 model; dimming control and standard / nondimming control. Dimming control products are identified by the text “0-10V & DALI” on the product label. Telecell products are built and supplied to either the EU or US standards: US product part numbers start with T2A… The products are supplied with NEMA pin connections for insertion into the photocell socket on top of a luminaire.
4 Specifications 4.1 US Type Products, T2A… Electrical Parameters: Supply voltage: 100 - 277 VAC, 50-60Hz Maximum switching current: 10A Radio: 4.
5 Installation Instructions Instructions for the installation of each of the different variants of Telecell are given below. Figure 2 shows a wiring diagram for a standard lamp with a non-dimmable ballast. Figure 3 shows dimming control using a dimmable ballast. Once installed and power is applied then the Telecell will automatically switch on to apply power to the lamp as an installation test.
When safe, open the luminaire and install the two-part Telecell as follows: First drill a half-inch (12.5mm) hole in a suitable flat area of the luminaire wall to fit the external antenna, making sure there is clearance inside the luminaire for the antenna cabling. When fitting the antenna use all the waterproofing gaskets as provided and ensure that the metal grounding teeth on the antenna base make contact inside the luminaire case.
6 Installation Logging The telecell ID number, the OSID, is bar coded and located underside the unit. This OSID must be recorded with the ID or geographic co-ordinates of the lamp under control and recorded in the CMS database. There are a number of different methods to achieve this and installers will be trained with the appropriate method for their system.
7 Telecell Connection Diagrams Table 2 Telecell 2 Wiring Colours Colour code Function Black LIVE/LINE in White NEUTRAL in Shown BLUE in wiring diagrams Red LIVE switched out Relay switched inside Telecell Violet + Dimmer control Grey - Dimmer control Integrated dimming function Telecells only. DALI control is not polarity sensitive.
Figure 2 Wiring diagram for Telecell without dimming function Figure 3 Wiring diagram for Telecell with integral dimming control User Manual and Instructions for the US Telecell 2 TL-004391-TN Issue 3 © Telensa Ltd 2017 Telecell Connection Diagrams Page 13
8 Notices for North America Region 8.1 United States of America This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of FCC rules.
L'émetteur radio (à identifier par le numéro de certification) a été approuvé par Industry Canada pour fonctionner avec les types d'antenne listés ci-dessous et cela pour les gains maximum admis également mentionnés. Tout autre type d'antenne non inclus dans cette liste, ayant un gain supérieur au gain maximum toléré, est formellement interdit d'utilisation avec le dispositif pre-cité.