COMMERCIAL IN CONFIDENCE Technical Note Subject: User Manual and instructions for the EU & US Telecell Date: 29 Oct 2014 Document ref: 6LT041 05 Intentionally Blank 6LT041 05 QP4016 06 - Tech Note Template 29 Oct 2014 Page 1 of 9
Telensa Telecell 2 User Manual 6LT041 05 QP4016 07- Tech Note Template 29 Oct 2014
Contents CONTENTS ................................................................................................................................................................ 3 1 OPERATIONAL SAFETY NOTICES ............................................................................................................ 4 2 TELECELL VARIANTS .................................................................................................................................. 4 3 SPECIFICATIONS ................
1 Operational Safety Notices Installer Installers must be suitably trained and qualified for electrical work, according to the laws and local codes for the locality and country where the unit will be installed. This unit must only be installed by personnel that have been trained by Telensa or their representatives to carry out this work.
3.
Fig 1: Example NEMA socket showing alignment 5 Telecell Connection Diagrams Refer to figures 2 and 3 overleaf. Colour code Function Brown LIVE/LINE in Blue NEUTRAL in Red LIVE switched out Relay switched inside telecell Violet + Dimmer control Grey - Dimmer control Integrated dimming function telecells only. DALI control is not polarity sensitive.
Figure 2: Wiring Diagram for Telecell - No Dimming Function 6LT041 05 QP4016 07- Tech Note Template 29 Oct 2014
Live in Telecell Neutral Dimmer control Live out Ctrl 1 Lamp Ctrl 2 Live in Dimmable Ballast Neutral Lamp Lamp Figure 3: Wiring Diagram for Integral Dimming Control Telecell 6LT041 05 QP4016 07- Tech Note Template 29 Oct 2014
6 Notices for products operated in the USA & Canada This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of FCC rules.