User Manual

ManualsBrandsTelematics Wireless ManualsElectronicsMonitoring Service Reader

HAND HELD

READER

Revision: 1.0

Date:

This document contains proprietary information, which is the sole

property of Telematics-Wireless. The document is submitted to the

recipient for his use only. By receiving this document the recipient

undertakes not to duplicate or to disclose in part of, or the whole of,

any of the information contained herein to any third party without

receiving before hand, written permission from the submitting

company.

Summary of content (9 pages)

PAGE 1
HAND HELD READER Revision: 1.0 Date: This document contains proprietary information, which is the sole property of Telematics-Wireless. The document is submitted to the recipient for his use only. By receiving this document the recipient undertakes not to duplicate or to disclose in part of, or the whole of, any of the information contained herein to any third party without receiving before hand, written permission from the submitting company.
PAGE 2
Operation Manual 2 Contents 1. GENERAL INFORMATION..........................................................................................3 1.1. 1.2. 1.3. 2. PC SOFTWARE...............................................................................................................4 2.1. 2.2. 3. INSTALLATION ............................................................................................................4 FILES TRANSFER ......................................................................
PAGE 3
Operation Manual 3 1. General Information 1.1. Introduction The electronic seal’s reader is a handheld device that enables to set and activate TDMA electronic seal when the container is loaded and closed. 1.2. Reader Description The Reader is based on Telematics-Wireless’s TDMA reader, which is controlled by a PDA. The TDMA reader is in standby mode most of the time and become active to very short duration upon application (PDA) software request.
PAGE 4
Operation Manual 4 2. PC SOFTWARE 2.1. Installation Insert the supplied CD into the PC CD drive and follow the installation instructions. In the partner setting, select synchronization of files. The installation procedure will open new directory for the synchronized files and put a shortcut in the PC desktop. The new directory is \Documents and Settings\[user name]\My Documents\ Pocket_PC My Documents 2.2.
PAGE 5
Operation Manual 4. Operation 4.1. Start HH Reader Make sure that the TDMA reader is on before starting the IPAQ application. The IPAQ application can be start by pushing the leftmost function button or click and . 4.2. Log In The first thing is log in. The application will ask for User PIN and password. The User PIN is 8 digit number and the password is and 8 characters. If less then 8 digits/Char is entered the application will add leading ‘0’.
PAGE 6
Operation Manual 4.4. Seals’ Files The seals’ files window enables viewing the content of the saves seal status. Every time “save” operation is done the current seal’s status is appended to the seal’s file. The current status consists of: Time and data of the save operation. Seal internal time and date Seal status (Active, Tempered) Current status of door and external sensors Number of sealing records and the records Number of tampering attempts and the attempts details Freight information.
PAGE 7
Operation Manual 4.6. Sealing Records and Tampering Attempts The records window consists of two lists, the sealing records list and the tampering attempts list. Every sealing record consists of: Action (Activate or Deactivate) Time of action Action performed by Mechanical lock number Every tampering attempt consists of: Tampered sensor Start time of tampering attempt Duration of the tampering attempt Clicking “Back” will return to the seal status window.
PAGE 8
Operation Manual 4.8. 4 5 8 Seal Setting “Reset Seal” will delete the sealing records, tampering attempts and freight information from the seal. If selected the application will go back to the seal status window and refresh the status. “Set RTC” will set the seal real time clock to the IPAQ time4.
PAGE 9
Operation Manual 4.9. 9 Errors Conditions Error message Reason TDMA reader is off Coomunication with TDMA reader lost To do 1. Exit application 2. Turn TDMA reader on 3. Restart application RF interference Reader not pointing seal Seal out of range 1. Make sure within range 2. Hold reader toward seal 3.