Telematics Wireless Proprietary FCC ID:NTA2WLCU 10DEC2014 LCU User Manual Rev 1.
Telematics Wireless Proprietary FCC ID:NTA2WLCU 1. Description T-LightTM - Telematics Wireless's solution for Smart Lighting enables utilities and maintenance companies to benefit from an improved level of costeffective, reliable and timely service, by controlling and managing street light operations. The T-Light LCU (Light Control Unit) is installed in each light pole enabling the transmission of information, and the reception of control commands for the luminary’s LED/HID fixtures.
Telematics Wireless Proprietary FCC ID:NTA2WLCU Electrical Specification 1.1 Transmitter Specification Frequency range 450-470MHz Output Power 34dBm max. Mask per FCC part 90.210 e Modulation 4GFSK Data rate 4.8kbps 1.2 Receiver Specification Frequency range 450-470MHz Modulation 4GFSK Data rate 4.8kbps Sensitivity -120dBm 2. General Specification Power Supply 115V AC Operating temperature -40 to +85deg C. Size 150x50x25 mm 3.
Telematics Wireless Proprietary FCC ID:NTA2WLCU 4. Safety Instruction Personal safety is VERY IMPORTANT! Obey all the following safety precautions when installing LCU devices. Installation should only be performed by qualified personnel. All installations should be performed according to local electrical codes. Disconnect power before performing installation. Special care is required when working at heights as a fall can result in serious injury or death.
Telematics Wireless Proprietary FCC ID:NTA2WLCU 7. Installation Instruction CAUTION The user and Installer should be aware that changes or modifications to this equipment not expressly approved by Telematics Wireless could void warranty and the user’s authority to operate the equipment. Professionally trained personnel should install the equipment.
Telematics Wireless Proprietary FCC ID:NTA2WLCU INSTRUCTIONS The LCU connectivity is depicted in the figure below.
Telematics Wireless Proprietary FCC ID:NTA2WLCU The LCU connection options are depicted in the figures below.