User Manual

DTR5000N Remote Control

Remote Control

Remote Control Unit

This section describes how to operate the DTR5000N using the buttons on your

Remote Control Unit as shown below.

(1) POWER

To turn your DTR5000N on/off.

(2) TV/SAT

To toggle from TV mode to satellite broadcasting mode

and vice versa

(3) Number

To select channel number or input parameters on menu.

(4) RECALL

To return back to the previous channel.

(5) i

To display the program information on the screen

PAGE 1
DTR5000N Remote Control Remote Control Remote Control Unit This section describes how to operate the DTR5000N using the buttons on your Remote Control Unit as shown below. (1) POWER (2) TV/SAT (3) Number (4) RECALL (5) i To turn your DTR5000N on/off. To toggle from TV mode to satellite broadcasting mode and vice versa To select channel number or input parameters on menu. To return back to the previous channel.
PAGE 2
DTR5000N Remote Control (7) EXIT To display the main menu on the screen. Or to move back to previous menu from current menu. To get completely out of menu.
PAGE 3
DTR5000N Remote Control System Set-up Here, we will go through the menu system, menu by menu. To manipulate the menu, you use mainly the following key strokes : UP/DOWN, Left / Right, OK Menu, Exit Basic Menu Operation Key stroke with your remote control When you want to maneuver the Menu System with remote control, you can use the following key stroke.
PAGE 4
DTR5000N Remote Control