User's Manual

ManualsBrandsTelefield ManualsBaby Monitors1.9GHz Digital Modulation Baby Monitor

Model: Y7445/Y7446

To 







 

 



True Choice

™

Premium Digital Monitor

(P300 and P400)

Questions? Comments?

Contact Consumer Care

www.learningcurve.com

800-704-8697

Note:

P300 comes with one Child Unit,

one Parent Unit, one rechargeable battery

pack and two AC adaptors.

P400 comes with one Child Unit,

two Parent Units, two rechargeable battery

packs and three AC adaptors.

Except for setting up (and using) the second

Parent Unit, instructions for both models are

the same.

QUICK START INSTRUCTIONS

You’ll find detailed instructions inside. Please read the safety instructions on page 2.

Set up the Parent Unit(s)

5For portable use: Install the battery pack. Battery compartment is located on

the back of the unit. Loosen screw to release it, and lift cover off. (for easier

access, press on top of belt clip to hold it out of the way.) Insert plug on battery

pack into connector inside compartment, then fit battery into place with battery

info side facing up.

IMPORTANT: Charge battery for 8 hours before first use

5For plug-in use: Connect one of the AC adaptors provided

Set up the Child Unit

5Place the Child Unit near your child (within 6 feet, but well beyond child’s reach).

5Connect the remaining AC adaptor to the unit and plug into wall outlet

To Use:

1 Press and release power button to turn the Child Unit on and wait for connection indicator to blink.

2 Press and release the power button on the side of the Parent Unit to turn it on.

3 Connection indicators on all units should glow blue indicating connection.

4 Press [+] or [-] to adjust volume of Parent Unit(s).

5 Keep the Parent Unit within hearing distance.

Before returning this product to the store for any reason, please contact our

Parent Service Center at 1-800-704-8697 or www.learningcurve.com

Often, we can provide helpful tips and instructions to resolve your problem

quickly over the phone or by e-mail.

P300 Parent Unit

P300_P400 Child Unit

P400 Parent Unit

AC adaptor

jack

WARNING:

Model:Y7445C Y7446C

odel:Y7445P,Y7446P

Summary of content (12 pages)

PAGE 1
True Choice™ Premium Digital Monitor (P300 and P400) Note: P300 comes with one Child Unit, one Parent Unit, one rechargeable battery pack and two AC adaptors. P400 comes with one Child Unit, two Parent Units, two rechargeable battery packs and three AC adaptors. Except for setting up (and using) the second Parent Unit, instructions for both models are the same. P300_P400 Child Unit 6V DC P300 Parent Unit P400 Parent Unit QUICK START INSTRUCTIONS You’ll find detailed instructions inside.
PAGE 2
Safety Instructions This symbol is intended to warn the user of potential safety hazards. This symbol is intended to alert the user to a potential risk of electric shock and other electrical safety issues. WARNING: To reduce the risk of fire or electrical shock, do not open this product or expose this product to: Water And Moisture: This product should not be used near water, for example, near a bathtub or sink, in a wet basement or near a swimming pool.
PAGE 3
Contents and Features Child Unit, Parent Unit(s) and AC Adapter Connection indicator Volume control Removable belt clip/stand Power button Talk button(s) Sound lights Sound lights Power indicator Power button Power indicator Connection indicator AC adapter Connection indicator Battery pack Parent Unit(s) P300 Talk Button Child Unit Cord channel AC jack Talk-back Volume setting P400 Talk Buttons 6V DC Reset hole AC adaptor jack Nightlight Headphone jack 3 Wall mount slot
PAGE 4
To Set Up - Child Unit For wall mounting (optional) 1. Position the Child Unit within 4 to 6 feet of your child. NEVER position the unit within a child’s reach. 2. Insert the connector on the AC adapter into the jack on the back of the unit, then plug the adapter into an electrical outlet. 1. Press the adapter cord into the grooved channel on the back of the unit, making certain to slide it under the two holding clips. 2.
PAGE 5
To Set Up - Parent Unit(s) To install batteries For plug-in use/recharging 1. Loosen the screw to release the battery compartment cover. Then, lift the cover off. (For easier access, press on the top of the belt clip/stand to hold it out of the way.) 2. Insert the plug on the battery pack into the connector inside the battery compartment. Note: Align raised rib on plug with slot in connector. 3. Fit the battery pack into the compartment; be certain that the side with the battery information faces up.
PAGE 6
To Use Belt Clip/Stand Child unit 2 1 2 4 3 Parent unit Press on the top of the belt clip to open; slide it onto waistband or belt and release. Or, lift the tip of the stand away from the unit, and set the unit on any flat surface. TIP: Belt clip/stand can be removed from the Parent Unit to give you a smaller unit that is easy to slip in your pocket. 1. Press and release the power button 1 on the Child unit to turn it on and wait for the connection indicator 2 to blink. 2.
PAGE 7
To Use (continued) Lights 1 2 2 3 1 Here’s how to interpret the lights on the Parent Unit(s) and the Child Unit: 1 Power Indicator Blue Light Red Light Purple Light (Parent unit only) No Light Unit is on. Batteries are weak and need to be replaced or recharged. Remove dead batteries from child unit immediately. (See “For Temporary/Battery Powered Operation” p. 4) Recharge batteries in parent unit (See “To use,” p. 8). Parent unit is recharging batteries Unit is off or no power.
PAGE 8
To Use (continued) Two-Way Communications Recharging/Replacing Batteries Parent Unit(s) If You Have P300: 7 /"00 +! %,)! 1%" Talk button 1, 0-" ( +! 0,,1%" 5,2/ %&)! ")" 0" 211,+ 4%"+ 5,2 /" !,+" 1 )(&+$ If You Have P400: 7 /"00 +! %,)! 1%" Talk-to-Child & Parent button 1, 0-" ( +! 0,,1%" 5,2/ %&)! ")" 0" 211,+ 4%"+ 5,2 /" !,+" 1 )(&+$ ,2/ 3,& " 4&)) " 1/ +0*&11"! 1, 1%" ,1%"/ /"+1 +&1 0 4")) 7 /"00 +! %,)! 1%" Talk Parent-to-Parent button 1, 0-" ( 1, 1%"
PAGE 9
Troubleshooting PROBLEM POSSIBLE CAUSE No power (No lights on unit) Parent Units: Unit is not turned on. Batteries are dead. SOLUTION AC adaptor is not plugged into correct jack Child Unit: Unit is not turned on. Adapter not plugged in. Adapter plugged into outlet that’s turned off. No connection (Connection indicator flashing) Press and release power button. Plug in adapter. If outlet is controlled by a wall switch, be sure switch is turned on. Parent Unit is too far from Child Unit, (out of range).
PAGE 10
About Pairing Codes Care The Parent Unit(s) and Child Unit are digitally “paired” at the factory. This means they are digitally encrypted with the same electronic code so that they can securely communicate with each other and not be confused by the signals sent out by other electronic devices, such as cell phones or other monitors. It is unlikely, but possible, that strong electronic interference, such as a power surge, could erase this coding.
PAGE 11
Proper Disposal This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
PAGE 12
Limited Warranty Our Limited Warranty and Warranty Period When we use the terms "we," "us" and "our," we are referring to Learning Curve Brands, Inc., and when we use the terms "you" and "your" we mean the original end-user customer. Our products are guaranteed to be free from defects in material and workmanship under normal and intended use for a period of 90 days from the date of your purchase.