User's Manual

ManualsBrandsTelefield ManualsBaby Monitors1.9GHz Digital Modulation Baby Monitor

Model: Y7443/Y7444

To 







 

 



True Choice

™

Digital Monitor

(A100 and A200)

Questions? Comments?

Contact Consumer Care

www.learningcurve.com

800-704-8697

Note:

A100 comes with one Child Unit,

one Parent Unit and two AC adaptors.

A200 comes with one Child Unit,

two Parent Units and three AC adaptors.

Except for setting up (and using) the second

Parent Unit, instructions for both models are

the same.

QUICK START INSTRUCTIONS

You’ll find detailed instructions inside.

Please read the safety instructions on page 2.

Set up the Parent Unit(s)

6 For portable use: Install the 3 AAA batteries (not included). Battery

compartment is located on the back of the unit. Loosen screw to release

it, and lift cover off (for easier access, press on top of belt clip to hold it

out of the way). Insert 3 AAA batteries aligning + and – symbols to match

markings in battery box.

Tip: Use Alkaline batteries for longer use.

6 For plug-in use: Connect one of the AC adapters provided

Set up the Child’s Unit

6 Place the Child Unit near your child (within 6 feet, but well beyond child’s reach).

6 Connect the remaining AC adaptor to the unit and plug into wall outlet

To Use:

1 Press and release power button to turn the Child Unit on and wait for connection indicator to blink.

2 Press and release the power button on the side of the Parent Unit to turn it on.

3 Connection indicators on all units should glow blue indicating connection.

4 Press [+] or [-] to adjust volume of Parent Unit(s).

5 Keep the Parent Unit within hearing distance.

Before returning this product to the store for any reason, please contact our

Parent Service Center at 1-800-704-8697 or www.learningcurve.com

Often, we can provide helpful tips and instructions to resolve your problem

quickly over the phone or by e-mail.

A100 Parent Unit

A100_A200 Child Unit

A200 Parent Units

AC jack

adaptor

WARNING:

Model:Y7443C,Y7444C

Model:Y7443P, Y7444P

Summary of content (12 pages)

PAGE 1
True Choice™ Digital Monitor (A100 and A200) Note: A100 comes with one Child Unit, one Parent Unit and two AC adaptors. A200 comes with one Child Unit, two Parent Units and three AC adaptors. Except for setting up (and using) the second Parent Unit, instructions for both models are the same. A100_A200 Child Unit 6V DC QUICK START INSTRUCTIONS A100 Parent Unit A200 Parent Units You’ll find detailed instructions inside. Please read the safety instructions on page 2.
PAGE 2
Safety Instructions This symbol is intended to warn the user of potential safety hazards. This symbol is intended to alert the user to a potential risk of electric shock and other electrical safety issues. WARNING: To reduce the risk of fire or electrical shock, do not open this product or expose this product to: Water And Moisture: This product should not be used near water, for example, near a bathtub or sink, in a wet basement or near a swimming pool.
PAGE 3
Contents and Features Child Unit, Parent Unit(s) and AC Adapter Connection indicator Volume switch Removable belt clip/stand Power button Sound lights Sound lights Speaker Power indicator Power button Power indicator Connection indicator AC adapter Connection indicator Microphone Parent Units Child Unit 6V DC Cord channel AC jack AC jack adaptor Reset hole RES ET Wall mount slot Headphone jack 3
PAGE 4
To Set Up - Child Unit For wall mounting (optional) T RESE 1. Position the Child Unit within 4 to 6 feet of your child. NEVER position the unit within a child’s reach. 2. Insert the connector on the AC adapter into the jack on the back of the unit, then plug the adapter into an electrical outlet. 1. Press the adapter cord into the grooved channel on the back of the unit, making certain to slide it under the two holding clips. 2.
PAGE 5
To Set Up - Parent Unit(s) To install batteries For plug-in use 1. Loosen the screw to release the battery compartment cover. Then, lift the cover off. (For easier access, press on the top of the belt clip/stand to hold it out of the way.) 2. Insert 3-AAA batteries into battery compartment. Position the batteries so that + and – symbol match markings in the battery compartment. Tip: It is easier to install + end of battery first, then push – end into place. 3.
PAGE 6
To Use Belt Clip/Stand Child unit 2 1 3 2 4 1 Parent unit Press on the top of the belt clip to open; slide it onto waistband or belt and release. Or, lift the tip of the stand away from the unit, and set the unit on any flat surface. TIP: Belt clip/stand can be removed from the Parent Unit to give you a smaller unit that is easy to slip in your pocket. 1. Press and release the power button 1 on the Child unit to turn it on and wait for the connection indicator 2 to blink. 2.
PAGE 7
To Use (continued) Lights 1 2 2 3 1 Here’s how to interpret the lights on the Parent Unit(s) and the Child Unit: 1 Power Indicator Blue Light Red Light (Parent Unit(s) only) No Light Unit is on. Batteries are weak and need to be replaced. Remove dead batteries from parent unit(s) immediately. (See “To install batteries,” p. 5) Unit is off or no power. See “Troubleshooting.” 2 Connection Indicator on Parent Unit(s) Blue light Flashing blue No Light Unit is securely linked to the Child Unit.
PAGE 8
To Use (continued) Replacing Batteries Care Parent Unit(s): If Power indicator on the Parent Unit(s) glows red instead of blue when unit is turned on, batteries are low. If indicator does not light at all, batteries are dead. Replace batteries following instructions under “To Set Up-Parent Unit(s) p.5”. To Clean: Do not immerse the parent unit(s) or the child unit in water. Do not use cleaning spray or liquid cleaners. 1. Unplug the child and parent unit(s) if they are connected to a power source. 2.
PAGE 9
Troubleshooting PROBLEM POSSIBLE CAUSE SOLUTION No power (No lights on unit) Parent Unit: Unit is not turned on. Press and release power button. Batteries are dead. AC adaptor is not plugged into correct jack Child Unit: Unit is not turned on. No connection (Connection indicator flashing) Replace batteries (See “To Set UpParent Unit(s) p.5” ), or plug in adapter. Plug must be plugged into AC adaptor jack (see “For plug-in use” p. 5) Press and release power button. Adapter not plugged in.
PAGE 10
About Pairing Codes RESET The Parent Unit(s) and Child Unit are digitally “paired” at the factory. This means they are digitally encrypted with the same electronic code so that they can securely communicate with each other and not be confused by the signals sent out by other electronic devices, such as cell phones or other monitors. It is unlikely, but possible, that strong electronic interference, such as a power surge, could erase this coding.
PAGE 11
Proper Disposal This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
PAGE 12
Limited Warranty Our Limited Warranty and Warranty Period When we use the terms "we," "us" and "our," we are referring to Learning Curve Brands, Inc., and when we use the terms "you" and "your" we mean the original end-user customer. Our products are guaranteed to be free from defects in material and workmanship under normal and intended use for a period of 90 days from the date of your purchase.