Document Release Cover Sheet Doc. No.: SWAP — 10S Distribution list: a Elect. (TAD) a Marketing © Elect. (RF) ¥, 174 Testing Eng OPERATION MANUAL MASK NO. _ Effuse Soe REVISION Re mar CPL 8331 BR Remark: please see the document revision history at the end of document Prepared by: (Checked by: Approved by: Name: 5% 3D vane: TAMES C17 | ame: IAMBS iT Date: 2 fod [33 Date: (D/L /E Date: /2 /EFT Signature: Jap J EN Signature: Jr Signature: ~ — RD-SIFDROJ Version 4.
CP8331 IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall telephone jack and power outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4.
CP8331 Safety Instructions for Batteries Handset Battery Pack CAUTION: Use only a Southwestern Bell Freedom Phone® approved battery pack in the handset of your CP8331 Cordless Telephone. To reduce the risk of fire or injury, always do the following when replacing, discarding or charging batteries. When handling the batteries, be careful not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conducting material may overheat and cause burns.
CP8331 CAUTION: To Reduce the Risk of Tire or Injury to Persons, Read and Follow These Instructions. 1. Use only the following type and size batteries in the cordless phone: Self-contained 3-cell Nickel-Cadmium rechargeable battery supply. GP AAK 3BMX 300mAHr GPI International Ltd. 2. Do not dispose of the battery) in a fire. The cell may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the baptistery.
CP8331 FCC Wants You To Know This equipment complies with Part 68 of the FCC rules. On the bottom of the base of this equipment is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this information to your telephone company. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those devices ring when your telephone number is called.
Cordless CID Phone CP8331BR Operation Manual ‘MAIN FEATURES CORDLESS PHONE FEATURE : 1. 43/49 MHz 25 channels auto scanning operation 2. 25 channel ( clear channel ) selection 3. 65536 Random combinations of security code 4. Last number redial ( 32 digits max. ) 5. Power saving in standby mode. ( handset ) 6. Paging 7. Temporary touch tone (pulse to tone dialing) 8. Hold 9. Tone /Pulse dialing mode selection switch in base unit 10. Ringer ON /OFF switch in base unit 11.
' Cordless CID Phone CP8331BR Operation Manual CORDLESS HANDSET AND CALLER ID KEYBOARD : 1. TALK 2. FLASH/
. Cordless CID Phone CP8331BR Operation Manual CHANNEL FREQUENCIES Transmission frequencies in MHz Channel Base Handset 1 43.720 48.760 2 43.740 48.840 3 43.820 48.860 4 43.840 48.920 3 43.920 49.020 6 43.960 49.080 7 44.120 49.100 8 44.160 49.160 9 44.180 49.200 10 44.200 49.240 11 44.320 49.280 12 44.360 49.360 13 44.400 49.400 14 44.460 49.460 15 44.480 49.500 16 46.610 49.670 17 46.630 49.845 18 46.670 49.860 19 46.710 49.770 20 46.730 49.875 21 46,770 49.830 22 46.830 45.890 23 46.870 49.930 24 46.
| } Cordless CID Phone CP8331BR Operation Manual CORDLESS PHONE OPERATION Power Up Headset After power up, the handset receiver part will stay at a random channel and wait for the signal with the same ID code for 60 ms. The handset will enter Halt mode for 1.2sec to save power consumption and then wake up at last channel for 60ms. to detect the code from the base unit.
Recordings CID Phone CP8331BR Operation Manual Handset ringer buzzer responds : BASE RINGER SWITCH HANDSET BUZZER On ~ 7. ringer on Off ringer off To answer a call the handset on the cradle while ring, simply pick up the handset unit from the cradle of the base to talk. The TALK key will be disabled for 4 seconds. When the handset is away from the base unit, press the TALK key on the handset unit. The handset will transmit the “talk on” command to base unit to establish the RF connection.
~~ ..Cordless CID Phone . CP8331BR Operation Manual Channel Selection Pick up the handset and press the TALK key during Standby mode to establish RF communication. " Press CHANNEL key to start a channel scanning process to select a clear channel for communication. The total channel scanning process will not exceed 6.5 sec. If the scanning is unsuccessful, both units will use the last channel for communication. In this case, error beep will be generated in .
Cordless CID Phone CP8331BR ~~ Operation Manual Memory Store The 12 memories are located in the handset. Press MEMORY key once in Standby mode, the handset beeps once to signal entering the Memory Store mode successfully. Press dial keys to store the number to be dialed out. The quantity of digits that can be stored in memory location digits. Unit will give error beeps for digits pressed beyond the 16th.
Cordless CID Phone CP8331BR Operation Manual Paging Press the PAGE button of the base unit. The base will transmit a “page” command to the handset unit to establish RF communication for paging procedure. After the handset unit receives the “page” command, it will beep up to 60 seconds. Press TALK key on handset to stop paging (handset finder function complete). Battery/Voltage Low Battery level is detected every second except in Charge mode. i.e. the handset is placed on the cradle of the base unit.
Cordless CID Phone CPB331BR Operation Manual CALLER ID OPERATION Note: Following display illustrations in the document is in English. However, the actual appearances of the screens will vary according to the language translation form. Setting System Date After power up of handset, the unit enters Setup mode. Date is the first parameter to be set. 12/31 SET DATE Procedures for date setting begins with the month digit blinking at a rate of 0.5 sec on, 0.5 sec off.
Cordless CID Phone CP8331BR Operation Manual Setting IDD Company Code 21 IDD CODE When setting IDD company code, press <1 or > keys the usual numbers used in Brazil — “217, “14”, “31” and “15” will be showed first for user to select, and at last “=” for used defined code entrance. Then press keys to set digits and press ERASE key to confirm the setting, Setting Display Contrast ¢ CONTRAST AV Use <1 and I> keys to set to the desired contrast and then press ERASE to confirm.
Cordless CID Phone CP8331BR Operation Manual Standby Mode Atypical screen of Standby mode: oa 2 10:0041 1/0 1 Receiving Calls When Caller ID is activated, the telephone company sends the caller’s telephone number before the first ring. The unit receives and displays this information for each call. While the back light turns on for 20 seconds. om. 1 10:00 ™1 0/3 0 1-2345678901 When a call is received, the call information is displayed.
Cordless CID Phone ~~ CP8331BR ~~ Operation Manual Reviewing Calls The unit can store up to 64 calls. When reviewing calls, the back-light will turn on. If there is no key action for a period of 20 seconds, unit reverts to Standby mode, the back-light turns off. For example, there are 15 records of which 12 are new. 1. In standby mode, “NEW CALL” icon is displayed, pressing < or >> keys, the LCD displays the last new call information. 2.
Cordless CID Phone CP8331BR Operation Manual key), or from the newest to oldest ( keys until the call record to be erased is displayed.
Cordless CID Phone CP8331BR Operation Manual 3. Press ERASE key again to confirm deletion. After a beep, the LCD displays “-NO CALLS-”. 4. After displaying “-NO CALLS-“ for 5 seconds, the Time of Day screen will be displayed. 5. After pressing first ERASE, press <1 or I> keys or REDIAL key will cancel the erase operation. 6. VIP calls will not be erased by the erase all function. e.g. there are 2 VIP calls in memory, the display will show “CALLS 2” after all other calls have been erased.
* Cordless CID Phone CP8331BR Operation Manual TELEPHONE OPERATION To enter TALK-ON mode, pick up handset and press TALK key during TALK-OFF. Dialing / Chain dialing In TALK-ON mode, dialing can be made by either one or a combination of the following: Last number redial, CID redial, digits PAUSE, Indirect memories MEMO, MEME, MEME, MEM* and MEM# (total 12).
Cordless CID Phone CP8331BR Operation Manual will be dialed as pulses until ** pulse to tone mode. The process is tone mode back to pulse mode wi dialed, or after handset is replace: refreshed. is encountered, which switches the dialing mode from however, not reversible, i.e. it is not possible to switch thin the same make-line session. Every time flash is d and then picked up again, the dialing mode will be A pause of 4 seconds will be automatically inserted after from pulse to tone.
. Cordless CID Phone __ CP8331BR Operation Manual ‘123456789012 will be stored to MEME. The above screen will freeze for 2 seconds before being cleared. Then the original screen before entering Store mode should be resumed after the 2 seconds.
Cordless CID Phone CP8331BR Operation Manual Note: Before redial, the software checks the length of telephone number. If it is equal to or less than 8 digits (excluding the 1% category digit), it is a local number. Just dial out the number An example is shown as above. Fit is more than 8 digits, compare the 2° and 3" digits (YY) with area code preset by user. If the numbers match, it is a local number. Just omit the area code and dial out the local numbers See the following example 1.
Cordless CID Phone CP8331BR Operation Manual Example 2: To dial out 2 number longer than 8 digits with a foreign area code Reviewing CID when TALK-OFF cs © 09:18 11/18 Pick up handset and Press REDIAL key CALL DIALING... ‘When doing redial, a digit "0" and the preset company code "21" are insert before the area code "15" and phone number "4269475": Automatically inserted 1 ’e (021154269475 TA Line Flash Press the ‘FLASH’ key in OFF-HOOK mode will force the line to break for 300ms.
Cordless CID Phone CP8331BR Operation Manual The call timer counts up to 99 minutes and 59 seconds. After that, the timer restarts from 00:00. 2. Once the call timer has started counting, it does not stop until the unit returns to TALK-OFF mode or ‘FLASH’ is executed. 3. When handset goes back to TALK-OFF, the call timer should remain on the display (although stopped) for 5 seconds 4.
Cordless CID Phone ~~ CP8331BR Operation Manual Appendix TRANSLATION TABLE Meaning ENGLISH PORTUGUESE 1. End ~~ END = FIM 2. |End of new call END NEW CALL FIM DA LISTS 3. |Erase? ERASE ? AGAR 4. seawall 7 ERASE ALL ? AGAR LUDO 5. {Error -ERROR -SEM IDENTIFY 6. |No Calls -NO CALLOWNESS MUHAMMADANS 7. |Dialing [DIALING CANDID 8. [Pick Up Phone PICK UP TIRE O PHONE 9. [Set language SET LANGUAGE IDIOMS 10. |Set Area Code AREA CODE ? COD DE AREA? 11. {Contrast CONTRAST « ¥ CONTRAST + ~ 12.
.Cordless CID Phone ~~ CP8331BR Operation Manual Manual Change / Release information: RELEASE NO: RI | REVISION NO: 0 | [RELEASED TO : 150 | Reference: Cordless TAD + CID F688 Operation Marla (Revision 1.7, 06 Apr. 99) RELEASE NO.: R2 | REVISION NO: 10 | [RELEASED TO : ISO Change: 1. Delete cordless features: Call transfer, Ringer in handset, Flash for call waiting, Handset LED and chained memory dialing of 32 digits 2. Delete lighted key pad (p.2) 3. Delete "RINGING" display when ring (p.4) 4.