User's Manual

2. Press SELECT soft key. There are level 1 to Level 5 to
showing the contrast strength.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
For servicing or replacement, you can purchase a suitable headset
through service centre or retailer shop.
Pour I'entretien ou le remplacement, vous pouvez acheter un écou-
teur approprié par le centre commercial ou le magasin de détaillant.
Privacy of
communications may not be ensured when using this phone.
T-T104 (GP, 2.4V, 550mAh),
Warning: The changes or modifications not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
to this unit
For body worn operation, the has been tested andcordless handset
1. Press the VOL (- or +) button to scroll to Registration,
press SELECT soft key and then use the VOL (- or +)
button to scroll to Remove Handset.
Unreg-
istering”
3. Use the VOL (- or +) button to scroll to L1 or L2, and use
the VOL (- or +) button to scroll to your selection.
3. Use the VOL (- or +) button to scroll to L1 or L2, and
use the VOL (- or +) button to scroll to your selection.
2. Press the Speaker button, Talk button or Line 1 Or Line 2
softkey
NOTE: Although this device will accept a variety of standard
2.5mm telephone headsets, RCA does not guarantee
compatibility with 3rd party devices. Performance may vary
depending on the quality of the headset.
Use the VOL(- or +) to select the direct line which
you want to set and press Select softkey to confirm, then
use the VOL (- or +) button to scroll to your selection.
Dial softkey
NOTE: The line is automatically seized and the number is
dialed accordingly.
The
unit will emit a short beep and then reset automatically.

Summary of content (2 pages)