Installation Instructions

Product code
RS232 INTERFACE FOR TVLINK SYSTEMS
DOC.: T597.02
TVTRX232-916
DATE: 16/04/21
TELECO AUTOMATION SRL
Via dell’Artigianato, 16 - 31014 Colle Umberto (TV) ITALY
TELEPHONE: [phone] - www.telecoautomation.com
This document is the property of Teleco Automation Srl, which reserves all reproduction and copyrights
IMPORTANT! READ CAREFULLY THIS INSTRUCTIONS BEFORE INSTALLING AND COMMISSIONING THE PRODUCT. SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE. The product at issue must be installed, commissioned and maintained only by licensed and authorised people, respecting the laws
concerning the electrical installations. The manufacturer is not responsible for any damage due to wrong installation or improper use. The manufacturer, Teleco
Automation s.r.l, declares that the type of radio equipment is compliant with Directive 2014/53/EU. The full text of the EU compliance declaration is available at the
following Internet address: www.telecoautomation.com/ce.
INFORMATION TO USERS under art. 14 of the 2012/19/EU DIRECTIVE OF THE EUROPEAN PARLIAMENT AND COUNCIL of 4 July 2012 on waste electrical
and electronic equipment (WEEE). The crossed bin symbol on the equipment, or its packaging, indicates that the product must be collected separately from other
waste at the end of its useful life and not with mixed urban waste. Please contact your municipality, or local authority, for all information regarding the waste sorting
systems available in the area. The retailer is obliged to collect the old equipment free-of-charge when the customer buys a new equivalent equipment. This is to
encourage correct recycling/disposal. Appropriate waste sorting for the subsequent recycling,reatment and disposal in an environmentally sound way of the disused
equipment avoids negative e󰀨ects on the environment or human health and favours the re-use or recycling of the equipment’s materials.
In the view of a constant development of their products, the manufacturer reserves the right for changing technical data and features without prior notice.
Teleco Automation s.r.l. shall caution the user that changes or modications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
TVTRX232-916 works with the following devices:
- receivers
- transceivers
- transmitters
- temperature, water and sun sensors.
RS232 SERIAL COMMUNICATION SETTINGS:
TVTRX232-916
Baud rate 19200
Data bits 8
Parity none
Stop bits 1
Flow control none
MEMORY MAP: the device has 50 transmitter codes stored in location 1 to 50 of its memory.
Reserved area
User area,
locations 201 to
2000
50 codes
stored area
These codes allow TVTRX232-916 work as 50 di󰀨erent transmitters. Every transmitter can send up to 7
channels. These codes are xed and not modiable. In user memory area(201-2000) it’s possible to store
codes belonging to physical transmitters. To memorize a physical transmitter’s channel can be use command
2 which allow to store a transmitter code via radio in a dened memory location.
WARNINGS