Manual Statements 2016. Thank you for selecting our mobile phone. This user guide will provide you with the general information and operation instructions. Note: Use only accessories approved by the phone manufacturer to ensure safety. Failing to comply with this will violate the terms and conditions of the warranty. If the contents and displays described in this user guide do not match the actual operation of the phone set, please use the display of the actual phone set.
General Information 1. Security Emergency call In any country, you can dial 112 (or other emergency call number) for emergency help. Note: Based on the nature of cellular networking, the success of the emergency call cannot be guaranteed. Safety Precautions Before using your phone, please read the following important information to eliminate or reduce any possibility causing damage and personal injury. Do not use wireless phones while driving. Switch off wireless devices in aircraft.
Battery Information Information Charging and Discharging The charger is designed to be used in temperatures between 0 to 50℃. Do not charge the phone in wet and damp conditions. We strive to produce products in compliance with global environmental standards. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected a charger for longer than 12 hours, since overcharging may shorten its life.
Switch off the phone; remove the back cover, battery and other external power source. Fit the SIM card into the SIM card slot. 2.1.2. Charging the battery Plug the charger into the socket on the side of your phone. Connect the charger to an AC wall socket. The blinking of the battery level icon indicates the battery is being charged. When the blinking stops, it indicates the charging is finished During charging, the phone and charger will feel warm to the touch. This is normal.
2.2.1. SIM card Please insert available Subscriber Identity Module (SIM) card into your phone before using it. SIM card is supplied by your network carrier. All the information related to network connection is recorded on the SIM card, so are the contact information such as names, phone numbers and SMS that you set to store on the SIM. You can take out the SIM card from the phone and insert it into another GSM phone to use it. Most new phones will recognize the SIM card automatically. 2.2.2.
Main menu 3. Contacts You can save a phone number in the memories of SIM cards or phone. Select a contact in the contact list window and press LSK to perform: View contact: View the detail of the current contact. New: Create a new contact inside phonebook. SMS: Directly input the SMS and send it to the searched phone number. Call: Call the current contact. Delete: Delete the current contact. Delete multiple: Delete all the marked contacts in one time. Delete all: Delete all contacts.
Others：You can setup the speed dial number and check the Memory status. 4. Messaging You can send and receive the SMS as well as use Cell Location Display with this function. 4.1. Write and send message Edit contents, Insert phone number and others. Insert the number of the contacts and then send SMS / MMS to this number. 4.2. Inbox / Outbox/ Drafts/Sentbox This function is used to check messages in Inbox/ Outbox/ Drafts /Sentbox. 4.3.
4.4. Templates Some message templates given inside this menu. 4.5. Broadcast Messages Look up the broadcast messages. 4.6. Voice mail service This is similar to the Answer machine. You may transfer the incoming call that you fail to answer duly to your Voice mail server, where the caller can leave message. 4.7. SMS Backup Import or Export the message which is saved in your phone or memory card. 4.8. Options(Settings) You can check the SMS Settings, MMS settings, push message, and Message capacity. 5.
With this function, you can view the information of Missed calls、Dialed calls、Received calls、Rejected calls and also you can clean all these records via Delete Call Logs. Enter into any history interface, Select anyone logs, Press LSK Key to enter the Option list: Details: View the detail of the current call. Call: Call the current number. Write message: Directly input the SMS or MMS and send it to the current number. Add to contacts: save to phonebook.
6.2. Video Recorder More options: You can switch to Camera mode; modify the Effect, Contrast, Brightness and others. Camcorder Settings: Set up the video recorder.
6.3. Audio player You can enjoy the music with this function. You can use the following keys during the play. Key Left direction Key Right direction Function Press to switch to a previous song with cursor. backwards Press to switch to a next song with cursor.
OK Key Press to play/pause the Audio. Up 、Down key Press to volume up and down. 6.4. Video Player You can play the video with this function. You can use the following keys during the play. Key Left key Right key Function Press to go backwards. Press to go forwards.
OK Key Press to play/pause the video. Up、Down key Press to volume up and down. 6.5. FM radio You can listen the FM radio with this phone, also you can record the FM radio station which do you want record. Auto search and save: Search and save the channels. Channel List: Play, edit or delete the saved channels. Save: Save current playing frequency into channel list. Manual search: Search the radio by manual. Open speaker: Playing FM in loudspeaker mode.
Timing record: You can set up that the FM (one channel which you selected) will record at a specific time with this function. Record file List: View the recorded files list. Help: You can get the operation guide in here. 6.6. Sound Recorder You can take a recorder in this function. After record, access Options: Start recording: Select this option to record the sound. Record file List: View the currently-selected sound files. File format: You can choose the format (AMR, or WAV) for record file.
More options: You can modify the DC/DV mode, Effect, Contrast, Brightness, White Balance and others. Settings: You can select different Size, Quality, Banding and others. 8. Bluetooth Bluetooth: Open or close the Bluetooth Bluetooth visibility: Open or close the visibility. Paired device: Show the device which is connected Device name: Show off the name of Bluetooth. Bluetooth file Storage: You can select Storage memory card. Help: You can read some help information from it. 9.
10. Organizer 10.1. Calendar The screen will highlight the date of today after displays the monthly calendar when you enter in the calendar function. Add new schedule: Select Menu →Add new schedule→Write the schedule details →Select Store. 10.2. Alarm You can set up that the alarm clock will ring at a specific time with this function. 10.3. World Clock You can view the current local time of various countries. 10.4.
Turn on or turn off the torch light here. 10.5. Calculator Press OK Key to view the calculation results. Press the up, down, left, right and OK key to select +, -, *, /, = respectively. Press Clear to delete the figure. 10.6. STK SIM Card support is required in this service. 11. 11.1. Settings Call settings Dual SIM Settings: You can set your phone network status, including Standby mode, Reply by original SIM, Set SIM name.
Call divert: Divert an incoming call to a designated phone number under the presetting condition. This function can be launched or closed. Call waiting: The network will inform you for a newly incoming call during the call. Please contact with your network operator to launch or close the function because the function requires the network support. Call barring: Set up the right of calling and answering. This function requires the network support. You can launch or close the function.
Language settings：Set the current system language. Auto power on/off：Phone can power on/off according to your preset time. Power management: You can check the battery’s power. Restore factory settings: You can recover the phone into the initial settings with this function. The default password is: 0000. 11.3. Display Animation effect: Set the power-On or power-Off animations. Wallpaper settings: Set an image as wallpaper.
11.4. Security The phone lock password, SIM card password and PIN2 support 4-8digit numbers, do not support other characters. The default password of the phone when leaving the factory is 0000. The PUK /PUK2 are required to input if you want to unlock the SIM card. The PUK/PUK2 is provided by the network operator. PIN lock: open or close the PIN lock function. When PIN lock is launched, the PIN shall be input upon each power-on. Modify PIN2: Input the correct PIN 2. Just can be change.
Mobile tracker: You can track your phone when the phone lost; The default password is “0000” 11.5. Connections Network account: choice the network settings for data account before you want to use internet. GPRS Service: Enable/disable the GPRS network. Data connection settings: You can control the internet access as “always connect” or “Connect when needed”.. Network selection: choice the modes of searching the phone network, including Auto and Manual modes. 11.6.
13. User Profile Enter in the function; display the profile mode list including: Normal, Silent, Meeting, Outdoor and Flight mode. Activate: Press OK key to activate the profile mode. Settings: Customize the profile mode as following: Rename: Change the profile mode’s name. Ring settings: SIM1/2 Incoming Call: Set the ringtone for the SIM1/2 incoming call. You can also select ringtone from Memory card. SIM1/2 message: Select the ringtone for the SIM1/2 message.
Other alert rings: Select the Key tone, Battery low alert, Power ringtone, Dial tone. Note 1: After plugging in the headset, ringtone will output from the headset as well as the phone, when there is incoming call or message. Note 2: At the flight mode, Phone won’t be received any signal; you can activate flight mode in this menu. 14. Browser Internet Browser. Option: You can enter the Homepage and modify the default settings, like the Account settings. 15.
No service If you are in an area not covered by your network, or if a physical obstacle is present, such as in an enclosed area, the message “No service” will be displayed on your Standby screen and you will not be able to make or receive calls. You can try move closer to a window for better reception. For emergency only: When you are outside your network but inside other network, you can only make emergency call. No Valid SIM card: Your SIM card is locked or it has an error.
16. Health Please read these simple guidelines. SAR Compliance Your phone is designed not to exceed the limits of emission of radio waves recommended by international guidelines. SAR (specific absorption rate) is the measurement of body-absorbed RF quantity when the phone is in use. SAR value is ascertained according to the highest RF level generated during laboratory tests.
Use a wireless hands-free system (headphone, headset) with a low power Bluetooth emitter. Please keep your calls short and use SMS whenever more convenient. This advice applies especially to children, adolescents and pregnant women. women SAR Recommendations Prefer to use your cell phone when the signal quality is good. People having active medical implants should preferably keep the cell phone at least 15 cm away from the implant.
Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value.
