Tele Radio Panther SAFETY INSTRUCTIONS LANGUAGE: ENGLISH (ORIGINAL) ARTICLE CODE: PN-R8-1, PN-R8-2, PN-R8-6, PN-T7-3, PN-T7-4, PN-T7-5.
Thank you for puchasing a Tele Radio product PN-R8-1, PN-R8-2, PN-R8-6, PN-T7-3, PN-T7-4, PN-T7-5 INSTRUCTIONS ARE AVAILABLE FOR DOWNLOAD AT: www.tele-radio.com READ ALL INSTRUCTIONS CAREFULLY BEFORE MOUNTING, INSTALLING AND CONFIGURATING THE PRODUCT. These instructions are published by Tele Radio AB without any guarantee. These instructions are solely directed towards qualified installers. The instructions may be removed or revised by Tele radio AB at any time and without any further notice.
5
CONTENTS TECHNICAL DATA RECEIVER Receiver (base board) Receiver (base + relay expansion board) Receiver (base + high voltage expansion board) Current consumption Receiver data 7 8 9 10 11 TECHNICAL DATA TRANSMITTER Transmitter Batteries Change the batteries 10 13 13 SETTINGS Start the transmitter Turn the transmitter off Register the transmitter in the receiver Erase all transmitters from the receiver LED indications 14 14 15 15 17 Plac
TECHNICAL DATA RECEIVER R8-1 (BASE BOARD) 7 8 9 10 11 12 13 LEDs 5 1 2 3 4 LED6 18 1 2 3 4 5 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
R8-6 (BASE + RELAY EXPANSION BOARD) 34 32 33 28 29 30 31 LEDs 5 1 2 3 4 LED6 18 LED LED6 LED7 LED8 LED9 LED10 LED11 19 Relay 7 Relay 6 Relay 8 Relay 9 Relay 10 20 Relay 11 F S Relay 5 Relay 1 Relay 2 Relay 3 Relay 4 LED7 LED8 LED9 21. Expansion board communication LED 11 22. Relay LED 6 23. Relay LED 7 24. Relay LED 8 25. Relay LED 9 26. Relay LED 10 27. Relay LED 11 28. Relay 6 29. Relay 7 30.
R8-2 (BASE + HIGH VOLTAGE EXPANSION BOARD) 35 LEDs 5 1 2 3 4 LED6 18 19 20 LED F S Relay 5 Relay 1 Relay 2 Relay 3 Relay 4 LED7 LED8 LED9 NO NC CO 3 (kill) NO 17 CO 16 NC 2 15 NO 14 CO 13 11 NC 12 6 230 V AC 24-110 V AC COMMON NO 1 (on/off) 9 5 CO 10 4 NC WR/5 8 3 NO 12-24 V DC 7 2 CO 24 1 - 23 + 22 21 LED10 NC 4 (Buzzer) 35. Power supply LED 12 21 22 23 24 COMMON 24-110 V AC 230 V AC Recommended cable for RS232 is a twisted or shielded cable.
Current consumption RX MODEL SUPPLY VOLTAGE MAX. CURRENT CONSUMPTION R8-1 12-24 V DC <200 mA. R8-2 24-230 V AC <200 mA. R8-6 12-24 V DC <300 mA. Technical data FUNCTIONAL RELAYS: NUMBER OF CHANNELS: SIZE: WEIGHT: IP CLASS: 5/ 11 potential free* functional relays makes/ breaks 8A ACI 16 120 x 116 x 50 mm./ 4.7” x 4.6” x 2” 400-500 grams/ 14-18 oz.
TECHNICAL DATA TRANSMITTER 3-BUTTONS TRANSMITTER T5 1 2 1 2 3 3 17 18 19 1st step 1. 2. 3. 4. Top LED (red/green) LED 2 (red) LED 1 (red) 2-step buttons 1-3 NOTE! The right transmitter shows the button positions for the second step on the 3-button transmitter. Frequency: 2405-2480 MHz.
6-BUTTONS TRANSMITTER T4 1 2 3 4 5 6 1 2 3 4 5 17 18 19 6 20 21 22 1st step 1. 2. 3. 4. 5. 6. Top LED (red/green) LED 2 (red) LED 1 (red) LED 4 (red) LED 3 (red) 2-step buttons 1-6 2nd step NOTE! The right transmitter shows the button positions for the second step on the 6-button transmitter. Frequency: 2405-2480 MHz.
8-BUTTONS TRANSMITTER T3 1 2 3 4 5 6 7 1 2 3 4 5 8 17 18 19 20 21 22 23 24 1st step 1. Top LED (red/green) 2. LED 2 (red) 3. LED 1 (red) 4. LED 4 (red) 5. LED 3 (red) 6. 2-step buttons 1-8 NOTE! The right transmitter shows the button positions for the second step on the 8-button transmitter. 2nd step Frequency: 2405-2480 MHz.
BATTERIES BATTERY TYPE: OPERATING TIME: 3 x 1.5 V AAA alkaline Approx. 15 h. with continuous usage WARNING! Do not recharge! Attempts to recharge may cause rupture, or the leaking of hazardous liquids which will corrode the equipment. CHANGE THE BATTERIES 1. 2. 3. 4. 5. Remove the clip (2 screws). Remove the battery cover (2 screws). Remove the batteries, starting with the one in the middle. Put the new batteries (3 x 1.5V AAA batteries) in, starting with the battery to the left or to the right.
SETTINGS DEFAULT STATE • • discontinuous radiotransmission no on/off function The system will start transmitting as soon as the batteries are inserted and a transmitter button is pressed. Radio transmission will end as soon as no transmitter button is being pressed. START THE TRANSMITTER 1. Start the transmitter by pressing any transmitter button. TURN THE TRANSMITTER OFF 1. 14 The transmitter turns off when no transmitter button is pressed.
REGISTER THE TRANSMITTER IN THE RECEIVER 1. 2. 3. Press the receiver Function button until red LED 7 lights up. Press the receiver Select button until LEDs 1-5 light. Press any transmitter button, e.g. button 1 until LEDs 1-10 flash 3 times before going out. ERASE ALL TRANSMITTERS FROM THE RECEIVER 1. Press the receiver Function button and the Select button at the same time until red LED 1-5 go out. NOTE! If red LED 7 flashes slowly, one or several transmitters are still registered in the receiver.
RELAY SETTINGS All buttons (step 1 and/ or 2) as well as all relays can be re-mapped using the PC program Settings manager.
LED INDICATIONS LED INDICATIONS DURING START UP 1. All receiver relay-LEDs lit up for 0.5 sec. 2. Indications for settings are shown for 2 sec. Contact your representative if you have problems starting the system. LED INDICATIONS IN PROGRAMMING MODE LED 7 red ON LED 8 yellow ON LED 9 green ON LED 10 orange ON LED INDICATIONS DURING OPERATION LED 7 red OFF No transmitter registered flashes (on 500 ms./ off 1.5 s.) Transmitter logged in. flashes (on 1 s./ off 1 s.
ERROR LED INDICATIONS LED 7 (red) + LED 8 (yellow) LED 7 (red) LED 8 18 ON The receiver can not read the start-up information. Contact your representative. ON Radio module setup failed. Contact your representative. ON A radio package not coming from a Panther transmitter is received. LED 8 + LED 9 ON A radio package is received, but is not accepted. Contact your representative. LED 8 + LED 10 ON A radio package is received from a transmitter that is not registered.
PLACEMENT OF LABELS WITH IC AND FCC INFORMATION 1. Product label www.tele-radio.com Pb Model: T00007-03 Freq.: 2405-2480MHz Sn.:XXXXXX 1. 2150 www.tele-radio.com 2150 Model: T00007-05 Freq.: 2405-2480MHz Sn.:XXXXXX www.tele-radio.com Pb Model: T00007-04 Freq.: 2405-2480MHz Sn.:XXXXXX 2150 Pb www.tele-radio.com Pb Model: T00007-05 Freq.: 2405-2480MHz Sn.:XXXXXX 2150 The product label is placed under the clip on the battery lid. Remove the clip (2 screws).
2. IC and FCC ID label FCC ID: ONFC0911A IC: 4807A-C0911A 2. The IC label is placed on the left side of the battery clip. The FCC ID label is placed on the right side of the battery clip (see picture). The mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue.
FCC STATEMENTS THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE 2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER´S AUTHORITY TO OPERATE THE EQUIPMENT.
BATTERY PRECAUTIONS Observe the following warnings. As batteries contains flammable substances such as lithium or other organic solvents, they may cause heating, rupture or ignition. • Risk of explosion if battery is replaced with a battery of an incorrect type. • Do not short circuit, disassemble, deform or heat batteries. • Never try to charge a visibly damaged or frozen battery. • Do not charge rechargeable batteries with a higher voltage than specified. • Keep batteries out of reach of small children.
DISPOSAL OF BATTERIES An alkaline battery does not contain mercury, cadmium or lead, and is better for the environment than older types of batteries. Alkaline batteries should be disposed through local recycling stations/waste dumps. Contact your local government’s recycling or solid waste department for more information on proper recycling of alkaline batteries in your region. DISPOSAL OF ELECTRONICS Improperly disposed electronics may harm public health and the environment.
TELE RADIO AB Sweden, Main office Tel. +46 (0)31-748 54 60 e-mail: info@tele-radio.com www.tele-radio.com TELE RADIO SVERIGE Sweden Tel. +46 (0)31-724 98 00 e-mail: sverige@tele-radio.com TELE RADIO GmbH Germany Tel. +49 (0)94 51-944 8 550 e-mail: deutschland@tele-radio.com TELE RADIO ASIA China Tel. +86-(0)592-3111168 e-mail: china@tele-radio.com TELE RADIO TURKEY Turkey Tel. +90 216 574 22 94 e-mail: turkiye@tele-radio.com TELE RADIO LTD England Tel. +44 (0) 1625 509125 e-mail: england@tele-radio.