US GB DE FR ES NL SE NO DK
DK NO SE Pages 153 Things to remember 154 The system’s functions 154 The 860TX transmitter 155 The 860RX receiver 156 Connecting the receiver 156 Installing the receiver and its antenna 157 Programming the transmitter and receiver to communicate 157 Deleting all transmitters in the receiver 157 Starting the transmitter, starting the transmitter with a PIN code, shutting down the transmitter 158 Locking/unlocking a receiver 158 Changing frequency 159 Automatic shutdown 159 PIN code function, programming/cha
THE SYSTEM’S FUNCTIONS Charging the transmitter: Frequency: The transmitter is supplied with a rechargeable battery.The LED on the transmitter indicates red or green depending on battery status. Operating time for a fully charged transmitter is about 12 hours with continuous use. Logging on/off: THE 860RX RECEIVER Function selection: NL NL The system includes the ability to program a number of different relay function combinations.
PROGRAMMING THE TRANSMITTER AND RECEIVER TO COMMUNICATE CONNECTING THE RECEIVER 860RX-Cx 860RX-Dx * * * No flashing = 1 flash = 2 flashes = 3 flashes = * NO • Mount the antenna as high above the ground as possible. • The antenna should not be mounted in the vicinity of metal objects, such as girders, electric cables, and other antennas. SE NL ES ON THE RECEIVER: 1) Set switch 2 of the function selection dip switch to the ON position. 2) Press the reset button..
TURNING OFF THE TRANSMITTER CHANGING FREQUENCY: In order to turn off the transmitter, press the stop button. All relays in the receiver are disconnected when the stop button on the transmitter is pressed. 1) Start the transmitter by pressing buttons 9 and 10 at the same time for at least 1 second. Red LED 3 lights. 2) Release button 9, keep button 10 depressed. 3) Release button 10 and then select button 2 for frequency. You have 0.3 seconds to press the button.
4x2+2x1 4x2+2x1 2 2 1 2 H H MIDI MIDI OFF,OFF,OFF,OFF,ON ON,OFF,OFF,OFF,ON Receiver 1 (4x2+2x1) Receiver 2 (4x2+2x1) 6x2+1x1 6x2+1x1 6x2+1x1 1 1 1 1 2 1+2 I I I MIDI MIDI MIDI OFF,OFF,OFF,ON,OFF ON,OFF,OFF,ON,OFF x,OFF,OFF,ON,OFF Receiver 1 (6x2+1x1) Receiver 2 (6x2+1x1) Receiver 1+2 (6x2+1x1) 6x2+1x1 6x2+1x1 2 2 1 2 J J MIDI MIDI OFF,OFF,OFF,ON,OFF ON,OFF,OFF,ON,OFF Receiver 1 (6x2+1x1) Receiver 2 (6x2+1x1) 10x2 0 - K MAXI OFF,OFF,OFF,OFF,OFF Only 1 receiver 10x2 10x2 10x2 1 1
FUNCTION SELECTION 2: With function selection 2, you can control 2 receivers (receiver 1 or receiver 2, but never both at the same time), or you can control 2 lifts in an OHT crane (lift 1 or lift 2, but never both at the same time). By pressing button 7, yellow LED 1 is lit; if button 8 is pressed, LED 2 is lit.Yellow LEDs 1 and 2 can never be lit at the same time. Function selection C: Relay function: 6 double + 1 single function (6 x 2 + 1x 1).
Relay function: 20 double functions (10x2). See the illustration on the right to see which buttons control the respective relays.
Function selection O: PRE-SETS Relay function: 8 double functions + 2 relays for indication of which lift is selected. With the transmitter’s 7 and 8 buttons, you can control lift 1 or 2 in an OHT crane, but never both at the same time. See the illustration on the right to see which buttons control the respective relays. Setting pre-sets means that it is possible to pre-set/prioritize one relay function/button over another.
LED 4 = OFF. LED 3 = OFF. LED 4 = ON. Functions 3-4 and 7-8 are locked when they are pressed at the same time. LED 3 = ON. LED 4 = ON. Functions 9-10 are locked when they are pressed at the same time. LED 9 = ON. LED 10= ON Red LEDs for respective relays Function 7 has priority over 1, function 7 over 2. LED 1 = ON. LED 2 = OFF. Function 7 has priority over 1, function 7 over 2. Functions 1-2 and 7 are locked when they are pressed at the same time. LED 1 = OFF. LED 2 = ON.
TELERADIO COMPANY TERMS AND CONDITIONS OF SALE Receiver serial no.: Transmitter serial no.: Toggle relay: Function selection: Pre-sets: Automatic shutdown: Programmed transmitters: Frequency: ID1: ID2: ID3: PIN position PIN code /Name DK 1 Transmitter serial no.: 2 Function selection: NO 3 Automatic shutdown: 4 Frequency: 1.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.