Installation Manual System 460 IMPORTANT! Read through this information before you install the equipment To ensure that the remote control system has a long lasting time and risible Function, i is very important that the receiver and the antenna are mounted correctly. Correctly installed equipment will provide better range and longer Lifetime. It will be worthwhile spending a few minutes reading through these instructions. General Information The 460 system operating frequency is 433.92 MHz (418 MHz).
To prevent the transmitter from operating ery other receiver, the unit is coded in pairs. All units are supplied with # standard code, I ivory important that you give your own units an individual personal code, 1o prevent ether 460 transmitters from operating your receiver. There sxe 6361 different codes available. NOTE Your transmitter and receiver must be set with the same code to operate. To set the coding: ~ Open the transmitter. Set the transmitter code by adjusting the code switch lovers.
1] Receiver coding Selector switch A code Bode on the transmitter "| !WAGERER] |: Puree » | :EHRENBERG | | w | Varanasi | |: CHARIOTEER NB { Position 10 is equal in both coding tables. Transmitter jumper il » Relay Function Adjustment, “The relays have two different dames of operation. 1. The relay is energized only when the transmitter button is pressed (momentary action). Thin i the standard setting. 2.
pL Robust transmitter Robust receives Unction 1 | hus patriotic over function 2 (Switch } «ON OH Opn EEE TROUBLE SHOOTING SYSTEM 460 Os [ORO] 7] 4=0N We assure that yor Bevy refill read the Installation Man gal for his system sod ® . six 5 =ON ors sore emphasis Howe very important it & with a correct installation. s=on Tmo | LED indications for the receiver: Vet low Led Indicate that he receiver has correct voltage.