User's Manual

ManualsBrandsTekk International ManualsElectronicsTwo Way Radio

Brief Introduction

Thank you for buying handheld two-way radio XM-700. The XM-700 provides cost-effective

communications totally unlicensed for a variety of business and personal communication solutions.

The XM-700 operates on 5 special FCC designated frequencies free for you to use all across the

USA.

Please read this manual carefully in order to know how to properly operate the radio before

use.

Content

Unpacking and Checking Equipment--------------------------------------------------------------1

Parts List ----------------------------------------------------------------------------------------------- 2

Preparation----------------------------------------------------------------------------------------------2

Basic operations----------------------------------------------------------------------------------------3

LCD Icons Instructions-------------------------------------------------------------------------------4

Channel Information ---------------------------------------------------------------------------------5

Optional Items------------------------------------------------------------------------------------------5

VOX ---------------------------------------------------------------------------------------------------7

Battery ----------------------------------------------------------------------------------------------------7

Emergency Call -------------------------------------------------------------------------------------8

First /Quick Channel -------------------------------------------------------------------------------9

Information Input--------------------------------------------------------------------------------------9

Power On Setting --------------------------------------------------------------------------------------9

Troubleshooting ----------------------------------------------------------------------------------------11

Specification --------------------------------------------------------------------------------------------11

Appendix II CTCSS (Hz) ----------------------------------------------------------------------------11

Appendix III DCS-------------------------------------------------------------------------------------12

Unpacking and Checking Equipment

Welcome to use TEKK radios, before using we suggest you:

·Please check the packing box of this product and see if there are signs of damage.

·Please open the packing box carefully. We recommend that you identify the items listed in the

following packing list. if you find that our product and its accessories in handling are lost or

damaged during the shipment. Please immediately contact TEKK dealers.

Parts List

Summary of content (14 pages)

PAGE 1
Brief Introduction Thank you for buying handheld two-way radio XM-700. The XM-700 provides cost-effective communications totally unlicensed for a variety of business and personal communication solutions. The XM-700 operates on 5 special FCC designated frequencies free for you to use all across the USA. Please read this manual carefully in order to know how to properly operate the radio before use.
PAGE 2
Item Quantity Rubber Antenna 1 Li-ion Battery Pack 1 Desktop Charger 1 Power Adapter 1 Belt Clip 1 User’s Manual 1 Preparation Charging the Battery 1) Using the battery The battery is not completely charged at the factory, please charge it before using. To extend the battery life time, please power off the battery when you don't use two way radio, and save battery in a cool (temperature less than 25℃ )and dry place. 2 Precautions of Charging Equipment 1.
PAGE 3
150feet. 10. Do not replace charger's power cord. If the power cord damages, you must stop using charger immediately. 3. Charging the Battery Please use the battery charger designated by TEKK to charge battery. After purchase or extended storage (more than two months), the first time to charge battery cannot make battery reach its normal operating capacity. After repeating charge /discharge it two or three times, the operating capacity will increase to its normal capacity. 4.
PAGE 4
volume, rotate the volume switch knob counter-clockwise. 3) TX 1. According to different settings of monitor ,please monitor the radio for some while .Ensure there is no radio transmitting at the chosen channel . 2. Press PTT and face to microphone talking . 1) Please make the distance between your lip and microphone at 2.5-5 cm ,and talk as usual to get the best voice quality . 2) Press and hold PTT, LED red light is on . 3) Release PTT to receive information . 3.
PAGE 5
6 Lower power 7 VOX 8 First Scan 9 Scan 10 Channel No. Menu NO. 11 Signal Level for TX and RX Program Settings Channel Information Radio Basic Information 1) Channels Please choose desired channel number as working channel. 2) Turn On SP Turn on speaker, you can hear sound from radio when it receives correct signaling .
PAGE 6
1.By manual :long press the key with lock icon . 2.Auto-lock: Set time to active auto-lock .It will be invalid when re-turn on radio . 3.Auto-lock + memory : Set time to active auto-lock .It will be valid when turn on radio again. Tail Elimination You can eliminate tail by reversed CTCSS Signal or phases state after ending transmitting with CTCSS signaling .
PAGE 7
Key Lock Enable the key lock function. UP/DOWN Lock Enable UP/DOWN lock function . VOX VOX level Choose your desired VOX level. VOX Level Comparing Value You can choose 0-180 branch setting in every VOX level for your radio. VOX Delay Time This function helps you to make fluent communication by avoiding quickly back to TX mode without transmitting the last sentence . No VOX During RX When radio is receiving , VOX/IVOX are not available .
PAGE 8
Low Battery Orange Indicator Orange indicator lights when TX at low power. TX Available at Lower Battery Set the certain voltage value to enable radio TX at lower battery (if battery lower than certain value ,radio turns off power automatically ) APO at High Voltage Radio automatically power off if the voltage higher than pre-set voltage value. APO at Low Voltage Radio automatically power off if the voltage lower than pre-set voltage value.
PAGE 9
Assigned Channel : Suppose assigned at Channel 3 ,no matter what the present channel is ,alarm always goes from Channel 3. Present Channel: Suppose present channel is No.5 ,alarm from Channel 5. Present channel is No.6 ,alarm goes from Channel 6. 7) Emergency Channel NO. You can select desired channel to make emergency call. First /Quick Channel 1) First Channel Your radio can choose desired channel as first channel. 2) Quick Channel Your radio can choose desired channel as quick channel.
PAGE 10
scanning. 5) VOX You can turn on/off VOX function. 6) Monitor Your radio can disable/enable monitor CTCSS /DCTCSS, simultaneously will active SQ once receives carrier frequency. 7) Emergency Call You can make an emergency call by programmed key. 9)First Channel You can exchange to first channel by pressing programmed key. 10)Quick Channel You can exchange to quick channel by pressing programmed key.
PAGE 11
z Can not talk to other members of your group. Hearing other conversation channel (not group members’) Appendix II on CTCSS （Hz, a z z Verify transmitting is within effective operating range. Verify channel, frequency and code settings are correct. Please change code settings, including all two way radio settings of your group. Supported Non-Standard） 1-67.0 14-103.5 27-159.8 40-199.5 2-69.3 15-107.5 28-162.2 41-203.5 3-71.9 16-110.9 29-165.5 42-206.5 4-74.4 17-114.8 30-167.9 43-210.
PAGE 12
Keys Status Key Method Function 1 F1 Short Press No Long Press FM Radio on/off Short Press No Long Press Reverse frequency on /off Short Press No Long Press Key Lock on /off 2 3 F2 4 5 F3 6 7 SK1 Short Press Instant SQ Cancel 8 SK2 Short Press Back Light On Specifications General Specification Device Number(D/N) Frequency Range Output Power Channel Channel Spacing CTCSS/DCS Antenna Impedance Working Temperature Working Voltage Battery Type Dimension(antenna excluding) Weight (i
PAGE 13
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 14
Your Tekk International Inc. 2-way radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) for human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE and ICNIRP exposure limits for general/uncontrolled RF exposure environment at operating duty factors of up to 50% transmitting and is authorized by the FCC for occupational use only.