Tekion Connected Car Device-CCD User Manual PN: CCD-V1 Tekion Connected Car Device CCD-V1 User Manual 22 Nov 2022 Page 1 of 8
Contents Overview ................................................................................................................... 3 Contents in the Box ................................................................................................. 3 Product overview ..................................................................................................... 3 Product Specifications ............................................................................................
Overview OBDII Gen2 is the next generation of On-Board Diagnostic system enabled with IOT tracking and cloud connectivity. Contents in the Box • • OBD User manual Product overview Product Specifications Dimensions Weight User Interface On-Board Battery Charging through Operating Modes Housing Power Tekion Connected Car Device CCD-V1 User Manual 130.74x59.738x30mm ~181gram/0.
Operating Temperature Storage Temperature OBD Protocol Supported Wireless Connectivity 0-45oC 0-50oC High Speed CAN Medium Speed CAN SW CAN SAE J1850 VPW & SAE J1850 PWM ISO 9141-2 & ISO14230 KWP OEM Specific DOIP Wi-Fi Bluetooth GPS On-Board battery charging option OBD has 3 options for charging on-Board Battery • • • Charging through Wireless Pad Charging through USB Charging through OBD plug-in to vehicle • Device State 5.
.2 Charging through USB OBD battery can be charged through USB type C port by plugging to the USB connector. 5V@2A adapter is required for charging OBD through USB port 5.
OBD Power ON/OFF 7.1 Power ON To power OBD, press Power button for a sec. LCD display will show Tekion logo After power on, OBD starts booting which takes about a minute to resume normal operation 7.2 Power OFF To power OFF OBD, press & hold the power button for about 5-6 seconds Device Provisioning Step-1: Power on the device. Step-2: Open Tekion Mobile application for Auto Dealerships Step-3: Go to Walk-in page and click on the OBD Icon. Step-4: Scan the QR code on top of OBD device.
Modes of operation Active mode: All the peripherals like Radio (Wi-Fi/BLE), LED’s, LCD’s and Core are functional and running. Conditions to Enter Active Mode: - OBD plugin/out from the vehicle OBD socket. OBD connected/Disconnected to Wired and Wireless charger OBD Power Button press On Expiry of the Sleep Timer. Sleep mode: All the peripherals including Core will be in suspended Mode waiting for the Actives events to occur.
FCC Warning Class A NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.