Eco Water Monitor User Manual
Eco Water Monitor User Manual Contents 1. Product Information ...................................................................................................................................... 2 1.1 Definitions/Glossary .......................................................................................................................... 2 1.2 Introduction ....................................................................................................................................... 2 2.
Eco Water Monitor User Manual 1. Product Information 1.1 Definitions/Glossary Ullage The distance from the sensor to the surface of the liquid in the tank. Outlet The connection point from which water is drawn from your tank. It is typically located 8cm/3ins. above the bottom of your tank in one of the sidewalls. Water below the outlet level is not usable.
Eco Water Monitor User Manual Volume and % Once programmed with information about your water tank’s shape and size, and the mounting location of the Tekelek Eco-Water Monitor above the tank, the Tekelek Eco-Water Monitor calculates and displays the amount of water remaining in your tank in litres or Metric or US units gallons* as a percentage of the tank capacity. *Tank capacity and remaining water volume are displayed in Gallons in the USA, and in Litres else-where.
Eco Water Monitor User Manual 2. Features and Functions 2.1 Features 1 LCD Display 11 Error code information 2 MODE key 12 Power/data cable 3 DOWN key 13 Manufacturing information 4 ENTER key 14 Location feature (See Installation Guide) 5 UP key 15 USB connector 6 SETUP key 16 Mains power plug 7 Alarm Red LED 17 Tekelek Eco Water Sensor 8 Screw mount hanger 18 Self-tapping screws x 2 9 Beeper aperture 19 Weather seal (Gasket) 10 RESET button access 2.
Eco Water Monitor User Manual 2.3 LED The red light above the ENTER key flashes when there is an Alarm condition (see 3. Alarms) and on receiving data from the Tekelek Sensor. 2.4 Display – Symbols & Indicators The Tekelek Eco Water Monitor contains a display that conveys a variety of information during normal use and during its initial setup and configuration for use with your water tank. The display contains three sections (1, 2, & 3) as indicated in the diagram.
Eco Water Monitor User Manual H The value displayed is the tank height. W The value displayed is the tank width. Monitor Display: Bar graph indicator of liquid level - each bar represents 10% of tank height. . Tekelek Eco Water Sensor Display (If equipped with a display): Tanks 1m/3.3ft. in height or greater - each bar represents 1/10th of the top 1m/3.3ft of the tank. Tanks less than 1m/3.3ft. in height - each bar represents 1/10th of 1m/3.
Eco Water Monitor User Manual 2.5 Display Screens Information screens: Change between ‘Ltr or Gal’ (depending on units setting), %, Liquid height and Clock display screens using the r and s keys. Units in EU (Metric): Units in USA (United States Customary System): Eco-Water Monitor display During use the Tekelek Eco Water sensor takes a level measurement twice a minute and sends measurement information to the Eco Water monitor every 30 minutes.
Eco Water Monitor User Manual 3. Alarms Low Level Indication – When the tank level falls to <6cm/2.36inches of the bottom of the tank the ‘nearempty’ symbol will flash (see diagram above). When the tank level is such that there is below 10% of the usable volume of liquid left in the tank, the screen alternates between showing the remaining volume in Ltr. / Gal. (or % or liquid height) and ‘Lo’. High Level Indication – When the tank rises to within 12cm/4.
Eco Water Monitor User Manual 4.7 Dimensions (Monitor) 120mm x 90mm x 50mm / 4.72’’ x 3.54’’ x 1.96’’ 4.8 Power Supply - Tekelek Eco-Water Sensor—3V LiMn cell, CR2450 or CR2430 (Depending on sensor) - Tekelek Eco-Water Monitor: - Receiver: 5V DC (40mA) - Backup battery: 3V LiMn cell, CR2450 or CR2430 4.9 Mains Power Supply (incl.) for Tekelek Eco-Water Monitor North America: 110V +/- 10% 60Hz, meets UL60950-1 Other: 150V-240V, 50-60 Hz, meets EN60950-1 4.
Eco Water Monitor User Manual 5. Tekelek sensor battery change If the battery in the Tekelek Sensor needs to be changed the display will provide advance warning by showing the ‘TANK LOW BATTERY’ text below the bar-graph. Remove the Tekelek Sensor from the tank and move to a safe location The battery can be accessed by removing the 4 self-tapping screws from the base of the unit. Remove the old battery noting the orientation (‘+’ mark facing outwards) and replace it with a new battery, 3V.
Eco Water Monitor User Manual 7. Troubleshooting If the Tekelek Eco-Water Monitor does not receive or cannot understand the RF signal from the Tekelek EcoWater Sensor, an error message will be displayed on the Tekelek Eco-Water Monitor. The error message appears as an alternating screen showing ‘Err’ and ‘E:0?’ where? is a number. Error codes are listed on a label on the rear of your Tekelek Eco-Water Monitor.
Eco Water Monitor User Manual 8. Notes Please retain this product manual and the installation guide. It contains practical instructions, technical specifications and safety precaution warnings you should know about. The maximum displayed value for all measurements and computed values is 19999. If a measurement exceeds this value, the display will flash. This does not affect data calculations or alarm functions.
Eco Water Monitor User Manual 9. Warranty This product carries a 24-month warranty from date of original purchase from Tekelek against any deficiency or fault in manufacture. This does not affect your statutory rights, or any warranty offered by the seller if different to Tekelek. This warranty does not cover normal wear and tear, damage cause by negligence, accident, improper use or incorrect installation.