Cloud doorbell Camera User manual Date: 2017.1.
User Manual Index 0 Doorbell Camera Installation........................ 3 1 Smartphone Setup ........................................ 3 1.1 Download Smartphone App ....................................................................................3 1.2 Create an Account ..................................................................................................3 1.3 Doorbell Camera Connection .................................................................................5 1.4 Troubleshooting ....
0 Doorbell Camera Installation Before you continue following procedure, you must already finish the Doorbell Camera installation. If not, please refer the doorbell quick installation guide to install your Doorbell Camera. 1 Smartphone Setup 1.1 Download Smartphone App Please download and install “Could2Door” App from App Store (For iOS) or Google Play (For Android). 1.2 Create an Account 1) With the Smartphone connected to Internet via Home WiFi router, click Cloud2door icon to open the App.
User Manual 4) Enter a name, valid email address, and password for the account, then select “Create Account”. 5) Check your email to receive authentication code. Enter the PIN code and click “OK”.
User Manual 6) Your account and password are bringing out automatically, click “Log In”. 1.3 Doorbell Camera Connection The Doorbell Camera should be in Discovery mode and the button indicator should flash red and green. If the Indicator does not flash, please pressing the call button for ten to fifteen seconds to enter Discovery mode.
User Manual Call button Button indicator 1) Click “Add your new Doorbell Camera” to enter the Doorbell Setup page. Android phone: Tap the “Choose Wi-Fi” button. It will jump to Wi-Fi setup page. iOS phone: Press the “Home” key to back to home screen of iOS phone, and then select Settings -> Wi-Fi. 2) Select Doorbell Camera from SSID list. The Doobell Camera SSID is “Doorbell Camera_XXX” (Where XXX is the last 3 digits of the MAC address). After it is connected, go back to Cloud2door App.
User Manual (Android Smartphone) (iPhone) 3) Click Next button, and then select or custom a name to your doorbell. 4) Set the Time Zone, and if you live in the region that observes Daylight Saving Time (DST), you should check the Daylight Saving Time.
User Manual 5) Setup a new password to doorbell. The password will be used for some doorbell related operation (Ex: add/remove user account with doorbell). # MAKE SURE TO MAKE A NOTE OF YOUR PASSWORD! 6) Home router connection. Choose the Choose home router from SSID list, and then enter the password. If the home router doesn’t show in the list, please slide down to refresh the SSID list once.
User Manual Slide down to refresh the SSID list. 7) Andoid Smartphone: Choose home Wi-Fi router from SSID list again, and then click to back to the App. iOS phone: It will auto reconnect to Home Wi-Fi router. If not, please go to Settings->Wi-Fi page to choose home Wi-Fi router, and then back to App. Smartphone may take a few seconds for registration. Once registration is successful, the doorbell icon with a green tick will display on the screen.
User Manual 1.4 Troubleshooting Q: The “Next” button is not activation after I connected my Smartphone to doorbell during doorbell setup. A: 1. Go back to the WiFi setting page to make sure it is connected with Doorbell Camera_XXX. 2. If you have 3G/4G network connection, please turn off it and then try again. Q: After finish the setup procedure, the button indicator flashes red on Doorbell Camera. On Cloud2door App, the red circle with a X appears on doorbell icon.
User Manual 2 Operation 2.1 Cloud2door Home Page Below picture shows the Cloud2door home page. There is the green/red circle shows on doorbell icon to indicate Doorbell Camera status. Menu Doorbell status Doorbell functions Connected Disconnect Add second doorbell 2.2 Notifications 1. Missed Calls Log A yellow circle with the number of missed calls shows on doorbell icon. It will be removed when user views the Call Logs (Click the doorbell icon, then select Call Logs.). 2.
User Manual 3. Account Error When the doorbell has an account error, a Black circle with a Question mark appears. Your account may be removed by other members. You need to re-establish the doorbell connection if you want to use it again. 4. New Firmware Ready When new doorbell firmware is ready on server, a Red circle with information mark appears by About Device. You click About Devices -> Doorbell to upgrade doorbell firmware.
User Manual 2.3 Call Answer When the answer screen appears, it will take three pictures automatically. Click Answer button to speak with your visitor. Function Keys: Take a snapshot of the view. Take a snapshot of the view. Start/End recording the video. Speaker mode. To switch Handset mode, click the icon once.
User Manual Handset mode. To switch Speaker mode, click the icon once. Mute/UnMute voice transfers from Smartphone to doorbell. 2.4 Doorbell Functions Click Doorbell icon to enter Doorbell function menu. 1. Live View To monitor Doorbell, the microphone will be set to mute. You can see live image and hear the voice from Doorbell, but no voice to Doorbell (mute). 2. Video Clips To view the all the video recorded list. To play the video by clicked.
User Manual 3. Snapshots Click the item to view the picture. 4. Call Logs Check and manage the incoming call record.
User Manual 5. Motion-Detection Log When motion is detected, the detected time will be recorded. 6. PIR-Detection Logs PIR detected log is showed in the page.
User Manual 17
User Manual 3 Menu Click menu icon ( ) to bring up all of setup items. 3.1 System Settings App Settings: Ringtone: Select your favorite ringtone from the provided list. Once ringtone is selected, it will play once for your confirmation. Microphone Gain: Allow user to adjust Smartphone’s microphone volume. Echo Cancellation: Some Smartphones don’t support echo cancellation function. If echo is appeared while conversation, try to enable the feature to improve echo issue.
User Manual Doorbell Settings: User can manage the settings of related Doorbell Camera in the page. Audio Settings User can use the slider to adjust the speaker volume or microphone Gain of Doorbell Camera to against ambient noise. Both default settings are 5. Video Settings Motion Detection & PIR (Passive Infrared Sensor) Alert Once the Motion Detection or PIR is configured, Smartphone/iPhone will receive a notification when someone is moving in the front of Doorbell Camera.
User Manual Motion Detection Region: The live image is displayed, tap the region where you want to detection. Tap same region again to unselected. If you don’t want turn on this function, please keep all regions in unselect status. Motion Detection Sensitivity: User can adjust the motion detection sensitivity in the page. PIR Detection: You can setup PIR detection distance or disable it. Set to “High” that you can get longer detection distance.
User Manual Image Adjustments: To adjust the image quality related parameters.
User Manual Rename Doorbell: Change display name of Doorbell Camera. Change Password: Change the password of Doorbell Camera. The password is used for security related operation for Doorbell Camera. Ex: Delete user account, Wi-Fi discovered mode. * MAKE SURE TO MAKE A NOTE OF YOUR NEW PASSWORD! Remove Doorbell: Once you remove Doorbell Camera, you need to re-register with Doorbell Camera if you want to use it again.
User Manual Time Zone: Manual modifies the time zone for Doorbell Camera. The time zone will influence the record time for call, motion detection and PIR logs. Daylight Saving Time: If it observes Daylight Saving time (DST) in the region where the Doorbell Camera is. You should enable this feature. Ring time: set the ring time, the range is from 15 sec to 60 sec. If you can’t always pick up calls because the ring is time out, you can try to adjust the ring time to fix this issue. 3.
User Manual Account Name: Change user name. Account Password: You need to follow the password requirement to change password. All Account Status All accounts are displayed in this page. The icon indicates the account is online. The icon indicates the account is offline. Click icon to delete the account from this Doorbell Camera. Once account is removed, the user will not be able to monitor and receive any notification with this Doorbell Camera.
User Manual Add new Account to this Doorbell Camera It also allows you to assist other users added their account to this Doorbell Camera by clicked. The procedure please refers to section 4.3 Request access to the Doorbell Camera (P32) for details. 3.3 About Devices Software Information: Cloud2door App version. Hardware information: Smartphone/iOS device hardware information. Doorbells: It shows Doorbell related information in this screen.
User Manual Doorbell IP: IP address of doorbell MAC Address: MAC address of doorbell Wi-Fi SSID: The Wi-Fi AP’s SSID which is doorbell connected Wi-Fi Signal: It should show Good to get better Wi-Fi connection quality. Diagnostic Info: The item is used for issue diagnostic. It only needs to be enable when the technical supports to ask you. Firmware update: When the new doorbell Firmware is availability on cloud server, the icon is showed by About Devices.
User Manual Terms of Service 3.4 Where to Buy Show the web page. 3.5 Feedback If you have any question or trouble with Cloud2door App or Doorbell Camera, please write your question or trouble and send back to TECOM by email.
User Manual 3.6 Log out Once you log out the App, you will not receive any notification from Doorbell Camera. If you still want to receive notifications, you should leave App by Home key or Back key (by Android) Clicked.
User Manual 3.7 Log In You will be requested the account and password to login, after you executed App log out. 3.8 Forgot Password If you forgot your password, you can tap the Forgot Password link to reset password via your email. 4 Add more Smartphones to Doorbell One Doorbell Camera can support up to four Smartphones registered. After you finished your Smartphone registered, your family members can register their Smartphone to Doorbell Camera their self, or by your help. 4.
User Manual 3. Log in App by new account and password. 1. The member knows doorbell password and his/her Smartphone is connected with the home router which is Doorbell Camera is connected. => Refer to Section 4.2. 2. The member doesn’t have doorbell password, or his/her Smartphone is connected to different router with Doorbell Camera connected, or via 3G/4G network connection. => Refer to Section 4.3. 4.
User Manual 1. Click Connect to an existing Doorbell Camera button. 2. Click By using the Doorbell Camera password button. 3. Enter Doorbell password, then click OK to finish the setup.
User Manual 4.3 Request access to the Doorbell Camera 1. Click Connect to an existing Doorbell Camera button. 2. Click Request access to the Doorbell Camera button.
User Manual 3. Please keep in the screen, and ask other family member who knows the doorbell’s password to add your account. Once he/she added your account, the App will auto jump to main page. Following procedure has to be performed by other family member who knows the doorbell password. 1. Log in Cloud2door App, then select Menu ->Account Management -> All Accounts Status -> Doorbell.
User Manual 2. Click icon, then enter the new account and the doorbell password. Click OK. 3. The message “Add account OK” pops out once the new account is added.
User Manual 35
Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device.