VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION Feature Operation (VT 40-2421) 2.4GHz 4-Line Cordless Telephone with speakerphone, Type II Caller ID on Handset DOCUMENT NO. VT40-2421 MMI REV NO.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION TABLE OF CONTENTS 1. REVISION RECORD.................................................................................................................................................3 2. INTRODUCTION .......................................................................................................................................................4 3. FEATURES OVERVIEW.............
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc 1. Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION REVISION RECORD Revision Date 0 24-Jun-2000 Initial release 1 19-July 2000 REVISION 2 7-Aug-2000 REVISION 3 8-Aug-2000 REVISION 4 15-Nov-2000 REVISION DOCUMENT NO. VT40-2421 MMI Summary of changes REV NO.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc 2. Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION INTRODUCTION VT 40-2421 system consists of one base unit and up to 12 wireless handset units. The base unit provides 4 voice (RF) channels for intercom or outside calling by any wireless handset. Since the transmitter has the value of 5dBm, the EUT passed the applicable requirements. DOCUMENT NO. VT40-2421 MMI REV NO.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc 3.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc 4. Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION HANDSET KEYPAD LAYOUT FLASH CID LIST END LINE 1 LINE 2 LINE 3 LINE 4 REDIAL HOLD MUTE SPEAKERPHONE 1 2ABC 3DEF 5JKL 6MNO 8TUV 9WXYZ 0 OPER # DEL 4GHI DND 7PQRS PAUSE ÆTONE TONE CONF FUNCTION DOCUMENT NO. (Confirm) MEM VT40-2421 MMI INTERCOM REV NO.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc 5. Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION FUNCTIONAL DESCRIPTION OF HANDSET AND BASE 5.1. HANDSET 5.1.1. DIALING KEYS “0~9”, “*” & “#” Press the dial digits 0~9, “*” or “#’ on the dialing keypad. The corresponding DTMF tone (or pulse sequence) will be dialed out immediately. The dial digits will be buffered up to 30 digits maximum.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION a) make an intercom for conference call b) make the second line call for conference c) transfer the call to another station 5.1.9. MUTE KEY Press [MUTE] key to turns off the microphone for privacy or to resume back the conversation. 5.1.10. SPEAKERPHONE KEY Press [SPEAKERPHONE] to use the speakerphone for making or answering calls. To end the call by presses this key again. 5.1.11.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 5.1.14. VOLUME UP/DOWN KEYS These two keys have the following operations:a) For adjusting speakerphone volume in speakerphone mode (There are total of 5 volume levels setting). b) For adjusting ringer volume in idle mode (There are total of 3 volume levels setting Low/Mid/Hi). c) For adjusting the handset or headset volume when off-hook (There are total of 5 volume levels setting).
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc 5.3. Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION CHARGER 5.3.1. CHARGING LED This LED is used to indicate the charging status of the handset. 5.3.2. SPARE BATT LED This LED lights, illuminate a spare battery pack has been installed on the charger in charging condition. 5.4. LCD on the handset The LCD of the handset is 2*16 dot matrix with some icons. The top two rows are 2*16 dot matrix.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION b) Total caller ID counter (NEW icon is off) It means there are totally 25 caller ID in database. Or c) Current ringing Co line (eg line 3) When Co line 3 is ringing, it will display “L3” instead of caller ID counter. The 1st row will display caller name and the 2nd row will show caller number. 7-segment for date/time (It is for Caller ID only) 7-segment is for date and time.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc 6. Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION Operations 1. STANDBY MODE 1. In the Standby mode and the handset ID is programmed, the display shows as Fig. 1a or 1b or 1c: HANDSET 01 1a) Handset links with the idle base unit 1b) Handset links with the busy base unit 1c) Handset cannot link with base unit Note: 1. In the No Service case, the handset may have the wrong S.S.C.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 2. INSTALLATION After charging, the handset is removed it from its charging cradle, the screen will as Fig. 2. Registering handset security codes 1. Press [MEM] and the LCD will display the first programming choice as Fig.3 2. Press [s ] / [t ] until displaying “HS SECUIRTY CODE”(refer to Fig 4. Show “XXXXXX” or “EMPTY”) 3. Press [#] to confirm this option 4.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 3. PROGRAMMING HANDSET ID 1. 2. 3. 4. 5. Press [MEM] to enter the programming mode (refer to Fig. 3) Press [s s ] / [t t ] until displaying “HANDSET ID”(refer to Fig. 9) Press [#] to confirm this option (refer Fig. 9) Enter 2 digit ID no. (01-12) (refer to Fig.10). For example, handset ID is 05 Press [#] to confirm the ID no. and the screen will display Fig.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc 3. 4. 5. Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION Press [#] to confirm this option. Choose the ringer type by using [s s ] / [t t ] (refer to Fig.16). The default type is 1. Press [#] to confirm the choice and the screen will display Fig. 11 for 3 seconds and return to the programming display as Fig 15 (Change to type 3) RINGER TYPE 1 [s ] /[ t ] Fig.16 6. PROGRAMMING FLASH TIME 1. 2. 3. 4. 5.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 8. PROGRAMMING HOLD REMINDER TIME 1. 2. 3. 4. 5. Press [MEM] to enter the programming mode (refer to Fig 3) Press [s] / [t] until displaying “HOLD REMINDER” (refer to Fig.21) Press [#] to confirm this option. Choose the reminder time setting by using [s] / [t] (refer to Fig.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 10. RESET HANDSET PROGRAMMING 1. 2. 3. 4. Press [MEM] to enter the programming mode (refer to Fig 3) Press [s] / [t] until displaying “HANDSET RESET” (refer to Fig.25) Press [#] to confirm this option and the LCD will display Fig 26 Press [#] to confirm the choice and the screen will display Fig. 11 for 3 seconds and return to the programming display as Fig 1a or 1b or 1c.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 12. MAKING OUTSIDE LINE CALL LINE 2 mm:ss If trying to request a service from the 'busy' base unit which all the paths are in use. You will get an audible warning tone. 1. %2 Press an available [Lx], where x = 1/2/3/4. For example, Fig.29 press [L2]. The LCD will display Fig. 29 2. For example, the telephone number is 035775141+PAUSE +2581" 3.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 14. PR-DIALING 1. Enter the telephone number, for example: 2. "0357751412581 and the LCD will display Fig. 34 Press an available [Lx], where x = 1/2/3/4. For example, 0357751412581 press [L2]. The LCD will display Fig. 35 3. Fig.34 Press [END] to release the call, or put the handset to the charger to release the call automatically. The screen will return to idle mode as Fig.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 17. HOLD TRANSFER TO/HOLD 1. 2. 3. 4. 5. On line (eg. Line 2), the screen will display either Fig. 33 or Fig.35 Press [HOLD], and the LCD will display Fig.40 and Handset icons will be flashing. After 10 seconds time out, the display will return to idle display as Fig.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION MAKE AN INTERCOM CALL INTERCOM TO 1. Standby, press the [ICM] key. The LCD will display Fig. 2. 42 Dial desired intercom number, say station 12 calls station 05, the LCD will display Fig. 43 3. If the Called Party is Idle and Access-able, the calling Fig.42 INTERCOM TO 05 party station 12 will display Fig.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 18. ANSWERING AN INTERCOM CALL 1. 2. Handset is ringing, the LCD will display Fig. 45 Press [any one of the digit] key or you may press the INTERCOM BY 12 TALKING! [ICM] to pick up the ringing intercom call. The LCD will display Fig. 49. 3. The calling party station will show Fig.50 Fig.49 INTERCOM TO 05 TALKING! . Fig.50 19. PAGE CALL TO THE HANDSET 1. 2. 3.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 20. INTERCOM CALL AND PAGE CALL INTERCHANGING 1. 2. 3. 4. After make a page call. The calling party station 12 will display Fig. 51 The called party station 05 will stop ring and display Fig.52 The calling party station 12 presses the [ICM] key again. The page will be changed to intercom ring automatically. The calling party station 12 will display Fig.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 21. CONFERENCE CALL LINE 2 mm:ss The user is allowed to make a three-way conference call. %2 Two CO lines Conference Call 1. On CO line, the LCD will display Fig.53 or Fig.54 2. Press [HOLD], the LCD will display Fig. 55. Handset 3. icons will be flashing. Make the second CO line call, the LCD will display Fig. 56 4. Press [FUNCTION] and LCD will display Fig. 57. The 5.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION L2+L3 SPKR 0357751412555 %2 mm:ss %3 Fig.58b LINE 2 mm:ss %2 Fig.59a LINE 2 SPKR mm:ss %2 Fig.59b 22. TRANSFERRING CO CALL TRANSFER TO/HOLD 1. 2. On CO line, the LCD will display Fig.53 or Fig.54 Press [HOLD], the LCD will display Fig. 55 3. After the 10 seconds time-out, the display will revert to %2 the final idle display if nothing is dialed.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 23. TRANSFERRING RECALL LINE 2 1. If the transferred call didn't answer over 3 minute, the system will recall to all handsets to remind there is a line mm:ss %2 has been unanswered and in holding state for too long. The icon below the LCD will indicate the transferred Fig.62 line. 2.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 26. TONE FUNCTION LINE 2 mm:ss 035775141*2581 If you have pulse service and wish to access a computer or %2 calling service that use tone. Fig.66 1. On line, and dialed digits in pulse. The LCD will display Fig. 63 2. Press [TONE] (same as [*]) to change the dialing mode to TONE mode. And then enter the rest digits will be dialed as TONE signal. The LCD will display Fig.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 29. OUT OF RANG WARNING LINE 2 03577971*96 The LCD will display the “Out Of Range” and a double beep warning when the handset is too far from the base unit. You mm:ss %2 have to move closer to the base unit for clear conversation. Fig.69 1. Walking out from base unit service area, the LCD will display Fig. 72 2.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 32. COMPLETE WITH SPEAKERPHONE The speakerphone function frees your hands so you can keep working, too. Press the [SPEAKER] key to turn on the speakerphone function when you are using the handset unit. The voice will be switched to the speakerphone. If the user wants to come back handset mode. Press [SPEAKERPHONE] again to switch the voice to the handset automatically.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 34. SPEED DIALING OPERATION The Speed Dialing memory stores 20 names and phone MEMORY t] [s ]/[t numbers. Name: maximum 16 characters. Number: maximum 30 digits. Storing the information into speed dialing memory 1. Press [MEM] to enter the programming mode and the LCD display “MEMORY” (refer to Fig. 75) 2. Press [#] to confirm this option 3. The SPEED MEMORY will be displayed.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 8 for T, U, V, t, u, v, 8 9 for W, X, Y, Z, w, x, y, z, 9 0 for 0, “SPACE” * for * TONY KENT 1367225678 M05 # for # Fig.77b Reviewing the information from speed dialing memory 1. User could review the speed dialing memory by repeating the above step 1 to step 5. Dialing information from speed dialing memory 1.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 35. REMOVING ONE INFORMATION FROM SPPED DIAL MEMORY [1] DEL [4]DND [7] PAUSE [*] CONF Removing one information from speed dial memory 1. User could review the speed dialing memory by repeating the above step 1 to step 5. 2. Fig.79 Once the memory to be deleted is displayed (eg. memory 05 (Fig.77b), press [FUNCTION] and the LCD will display Fig.79 3.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 36. PROGRAMMING AREA CODE The Cordless System provides 1 home area code and 5 local area codes that are programmable. HOME AREA CODE EMPTY [s ] /[ t ] --- If the phone number came from your home area code (the one you programmed), the LCD displays only the phone number (without an area code). Fig.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc 4. Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION Press [FUNCTION] to display Fig. 79 and then press [DEL] (same as [1]) to erase the CID Area code. The 5. LCD will display Fig. 87 Press [#] to confirm the ID no. and the screen will display LOCAL AREA CODE2 DELETE? Fig. 85 for 3 seconds and return to the programming display as Fig 86a. (But, change to “EMPTY”) DOCUMENT NO. VT40-2421 MMI Fig.87 REV NO.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 37.CALLER ID TONY KENT Display If the Caller ID service is available from your telephone 12345678901 L2 9/02 11:09 AM % company, and you have requested this feature, the LCD will show the telephone name and number of the incoming calls. When you receive a call, the caller's Number & Name is displayed as: “ Name & Number”: Name and number are sent from your Fig.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION Delete all callers information 1. Press [CID LIST] to show Fig.91 2. To delete all callers information, press [FUNCTION] to display Fig. 79 and then press [DEL] (same as [1]). The ALL CID: XX NEW CID: XX Š%‹ Š%‹ Š%‹ Š%‹ LCD displays Fig. 92 3. Press [#] to confirm the choice and the LCD will shows Fig. 93 Delete a single callers information 1. Press [CID LIST] to show Fig.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION Case 2: If the phone number is less than 10, the phone will dial the phone number only without the leading DELETED ! “1”. Store a caller number into speed dialing memory 1. 2. you wish to store. (eg. Fig .94) 3. Fig.96 4 Press [CID LIST] to show Fig.91 Use [s ] / [t ] key to scroll the CID information, which Press [MEM] to enter the programming mode and the LCD will display Fig.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 1. After hearing a short CPE Alert Signal (CAS), the LCD will display the new incoming Caller ID automatically. If you want to view the new incoming Call ID of this line when you are doing something else, press [CALLER] and see the Caller LINE 2 1367225678 mm:ss %2 ID of the waiting caller as Fig. 103 Fig.102 2.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION 38.CALLER ID MESSAGE WAITING Your telephone company may send a "Message Waiting" signal to you. You can retrieve the messages through your MESSAGE WAITING ON LINE 1, 2, 3,4 telephone company. For example, Fig. 104a shows someone left messages to you on Line 1, 2, 3, 4. Fig. 104b shows Fig.104a someone left messages to you on Line 3 only. Delete the display of the message waiting 1.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc DOCUMENT NO. Date : 15 Nov, 2000 VT40-2421 MMI TITLE : INTERNAL PRODUCT SPECIFICATION REV NO.
VTECH TELECOMMUNICATIONS LTD. File :VT40-2421 MMI REV 4.doc 7. Date : 15 Nov, 2000 TITLE : INTERNAL PRODUCT SPECIFICATION FCC Warning Statement 7.1. FCC Warning Statement Caution to User: the changes or modification not expressly approved by the party responsible or Compliance could void the user’s authority to operate the equipment. 7.2. RF Exposure Warning Statement The 40-2421 is classified as a portable device and it does not operate in the one of the services listed in Section 2.1093(c).