TECNO KD6 User Manual FCC ID: 2ADYY-KD6 TECNO MOBILE LIMITED
Explosion diagram specification 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 FL(CTP+LCM) 6.95HD+ LC7 Black TCL V1.0 F flash lens KD6 8W R CAM I 3M R CAM 8M F CAM F CAM rubber KD6 R CAM 8W rubber KD6 FINGER PRINT KD6 UP FRAME KD6 R CAM Lens KD6 DOWN FRAME KD6 BATTERY KD6 MOTOR KD6 USB RUBBER KD6 FP STEEL KD6 SIDE KEY KD6 2 LT sensor light guide KD6 4 6 8 10 12 14 16 18 20 22 24 26 28 30 F hsg KD6 Black PC+20%GF R flash Lens KD6 Rec Deco KD6 REC KD6 REC support steel MAIN PCBA KD6 SCREW L2.5 SCREW L3.
Know your phone 1. Front camera 2. Volume key 3.
SIM/SD card installation 1. Power off mobile. 2. Refer to the following picture for SIM / SD card installation.
Charging the phone You can charge your device using a charger or by connecting it to the computer using a USB cable (comes with the phone). 1. Please remind the front and back of the plug. 2. Use only TECNO charger and cables. Other chargers or cables may damage the device. This will invalidate your phone warranty.
Emergency call If any emergency arises, dial 112/911 (or other emergency call number) for emergency help. Due to the nature of cellular networking, the success of emergency call is not guaranteed. FCC Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.