User's Manual

ManualsBrandsTECNO MOBILE ManualsCell PhonesMobile Phone

User’s Manual of itel Mobile Phone

1. Basic Information

1.1. Brief Introduction

Thanks for selecting itel color screen GSM digital mobile phone. Through reading the manual,

you can fully know how to use itel mobile phone, appreciate its complete function and simple

operating method.

itel color screen mobile phone is designed aiming at GSM/GPRS network environment; the phone

is Two Card Two Standby, but you can not call another SIM card when one SIM card is under

phone call. Besides basic call functions, itel also provides many kinds of practical functions, such

as name card holder, scene mode, message, audio and video player, camera and video, alarm clock,

calculator, STK, time and date, auto power-on and shut-down and etc. so that convenient for your

work and leisure activities. In addition, itel adopts personalized human-computer interface design,

its complete function can meet your different requirements.

itel color screen mobile phone accords with GSM criterion, has obtained the certification of

competent authority.

The company reserves the rights to revise the contents of the manual without prior notice.

2. Before Use

2.1. Install SIM Card and Memory Card

2.1.1. SIM Card

Before using the phone, you must insert valid SIM (Subscriber Identity Module) card in the phone.

SIM card 1s provided by network supplier.

All the information related to network connection are recorded in the chip of SIM card, also the

names, telephone numbers and SMS that storing in the name card holder of SIM card. You can

take out SIM card from your phone, and use it in any GSM mobile phone (new mobile phone can

read SIM card automatically).

In order to avoid losing or damaging the information saves in SIM card, please don’t touch the

metal contact surface, and place SIM card in the place that away from electricity and magnetic

force. Once SIM card is damaged, you can’t use the phone normally.

Prompt: Please make sure to power off the phone before taking out SIM card. It is absolutely

forbidden to insert or take out SIM card with external power supply; otherwise it may damage

SIM card and the phone.

2.1.2. Inserting and Taking out SIM Card

Metal contact surface of SIM card is easily scratched. You must take out SIM card carefully before

the assembly.

　 Power off the phone, remove the rear cover, battery or other external power supply.

　 According to the screen printing on the mobile phone into three SIM cards .

　 When taking out SIM card, directly pull it outward and then can take out SIM card.

Prompt: Without special explanation inserting two SIM cards are defaulted in the manual. If you

just insert one SIM card, maybe some options of the menu will not be shown.

2.1.3. Memory Card

Aim at the T card slot and push the T card gently, and the card will be inserted correctly.

Prompt: If the memory card is failed, please check whether it is correctly placed and good contact

Summary of content (8 pages)

PAGE 1
User’s Manual of itel Mobile Phone 1. Basic Information 1.1. Brief Introduction Thanks for selecting itel color screen GSM digital mobile phone. Through reading the manual, you can fully know how to use itel mobile phone, appreciate its complete function and simple operating method. itel color screen mobile phone is designed aiming at GSM/GPRS network environment; the phone is Two Card Two Standby, but you can not call another SIM card when one SIM card is under phone call.
PAGE 2
of metal point. 2.2. Battery 2.2.1. Install the Battery Take off the rear cover, of the mobile. Make one end of battery with metal surface aim at the battery connector. Then gently press the battery downward using the finger, and then press the other end to install the battery. Prompt: Please operate correctly to avoid damaging the battery connector. 2.2.2. Charging Insert the charger on the charging interface at the side end of the phone.
PAGE 3
When changing the locked PIN, you need to input PUK (Personal Unlock Key). PUK is provided with SIM card together. If it is not provided, please contact with your service provider. If you input wrong PUK for continuous ten times, the SIM card can’t be used again. Please contact with your service provider to buy new card. You can’t change PUK. If you lose the code, please contact with your service provider. PUK2 When changing the locked PIN2, you need to input PUK2.
PAGE 4
After call waiting function is started, when you are calling, the other call can be put through. 3.10. Call Barring After call barring function is started, according to different restricted conditions settings (all the dialed calls, all the incoming calls, incoming calls when roaming, dialed international calls, outgoing international calls when roaming), you can restrict the call under the corresponding conditions (need to apply to network operator for business). 3.11.
PAGE 5
Image viewer: Insert the image, you can preview and edit your mobile phones and the T card icon. Audio player: You can use the audio to play your favorite music files from phone or T-card. Video player: Enter the options you can choose you like the short play. Snake: Enter the Snake game, you can refer to the help menu after a game. Sound recorder: Use this feature, you can record or listen to your own recordings, and can set the recording to phone ring or the alarm clock rings.
PAGE 6
input way will appear on the top left of the screen. Letter (Capital, Normal) Enter edit page, press “#”and switch the input mode to “letter”, then press the keys on keypad, selected letters will appear on the screen. Press the number key can get the first letter marked on the key, press twice quickly can get the second letter marked on the key. Similarly, if the letter you want to input have the same key with the former letter, please wait until the cursor appears again, then input the new letter.
PAGE 7
•Keep the device dry. All types of liquids or moisture will corrode electronic circuits. • Do not store the device in hot areas. High temperatures can shorten the life of electronic devices and warp or melt certain plastics. •Do not attempt to open the device other than as instructed in this guide. Non-professional handling may damage the device. •Do not use harsh chemicals or strong detergents to clean the device.
PAGE 8
Warning： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.