eReader 20 Getting Started Guide
Overview Front perspective view Left side view
Right side view Rear view Getting Started Thank you for purchasing the eReader 20 refreshable braille display. This getting started guide provides instructions for charging the device, orientation, powering on and off, navigating menus, panning text, using the Context Menu, and accessing the User Guide. For more information on how to use your eReader, please refer to the digital user guide integrated in your eReader. In the Box Check that the listed items have been included.
Orientation and Description With the device on a flat surface in front of you, the proper operational orientation is with the braille cells closest to you. The top surface includes the braille display and the braille keyboard. Beginning with the braille cells (closest to you) and moving away from you are the small round Cursor Routing buttons, located just above the braille cells. You use the routing buttons to move the braille cursor when reading and editing and to activate items in a menu.
Powering On and Off If your device is charged, press and hold the Power button on the left edge of the device for approximately 2 seconds to turn on your eReader. “Starting” should appear on the braille display with a tactile loading animation that circles during start-up. After a few seconds, loading is complete. The “Notetaker” application is shown as selected on the braille display. Your eReader is now ready for use. To turn the device off, press and hold the Power button for 2 seconds.
SPECIFICATION Power requirement: +5VDC@1.5A Battery: Li-Ion 3.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.