User's Manual

ManualsBrandsTechnisonic Industries ManualsElectronicsT4000 RF Module

T4000 RF Module

P/N167552-x

Users Guide

DOCUMENT NO: 166673

REVISION:

DATE OF ISSUE: JUNE 26, 2016

Technisonic Industries

Limited

240 Traders Boulevard, Mississauga, Ontario L4Z 1W7

Tel: (905) 890-2113 Fax: (905) 890-5338

www.til.ca

This document contains designs and other information which are the property of Technisonic Industries Ltd. This

document may not in whole or in part, be duplicated or disclosed or used for manufacture of the part disclosed herein,

without the prior written permission of Technisonic Industries Ltd.

Summary of content (7 pages)

PAGE 1
T4000 RF Module P/N167552-x Users Guide DOCUMENT NO: REVISION: DATE OF ISSUE: 166673 JUNE 26, 2016 Technisonic Industries Limited 240 Traders Boulevard, Mississauga, Ontario L4Z 1W7 Tel: (905) 890-2113 Fax: (905) 890-5338 www.til.ca This document contains designs and other information which are the property of Technisonic Industries Ltd.
PAGE 2
INTRODUCTION The T4000 RF module is a Tri Band transceiver assembly that operates in 136 – 174, 380 – 520, and 764-870 MHz ranges. The T4000 RF module is a modified Motorola APX 8000 Tri Band portable radio. The outer casing, top controls, front display and keypad are removed. The RF chassis is slightly machined but all electronic circuits are unmodified from the original APX 8000 radio. The transceiver is designed to be installed and operated in a Technisonic Multiband Airborne Radio TDFM 9000 platform.
PAGE 3
NOTES ESD CAUTION This unit contains static sensitive devices. Wear a grounded wrist strap and/or conductive gloves when handling printed circuit boards. FCC COMPLIANCE INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 4
TECHNICAL CHARACTERISTICS Specification Characteristic Product Model Number: Physical Dimensions: Operating Temperature Range: T4000 RF Module Approx. (L) 5.1" x (W) 2.1" x (H) 0.85" -30° C to +60° C Power Requirement: Voltage: Current: Audio Output Power: 7.8 VDC ± 15% 325 mA minimum / 2.4A maximum 500 mW into 600 Ω FCC ID: IC: IMA-T4000 120A-T4000 RF Output Power: 1 to 6 Watts (VHF) 1 to 5 Watts (UHF) 1 to 2.
PAGE 5
INSTALATION The T4000 module should be installed in the TDFM 9000 in accordance with TIL document 126556 “TDFM-9000 FINAL ASSEMBLY SSP". FCC ID LABELS The T4000 RF module is a modified Motorola APX 8000. Part of the modification requires removal if the original Motorola FCC ID label. After all modifications are done the new Technisonic FCC/IC ID label is applied.
PAGE 6
The FCC/Industry Canada label is shown below. It is mounted on the top near the front of the module. FIGURE 3: T4000 FCC/Industry Canada Label FIGURE 4: FCC/Industry Canada Label placement on the T4000 Module The T4000 is intended to be mounted in the TDFM 9000 chassis and is not visible. Therefore, a second label must be applied to the outside of the TDFM 9000 that contains the following text: “TDFM 9000 Multiband Transceiver. Contains Module: FCC ID IMA-T4000”.
PAGE 7
WARNING AND DISCLAIMER Changes or modifications not expressly approved by Technisonic Industries could void the user’s authority to operate the equipment. This manual is designed to provide information about the T4000 RF Module. Every effort has been made to make this manual as complete and accurate as possible. WARRANTY INFORMATION The Model T4000 Transceiver is under warranty for one year from date of purchase.