User's Manual

ManualsBrandsTechnisonic Industries ManualsElectronicsVHF AM RF MODULE

T3400 RF Module

VHF AM

Users Guide

DOCUMENT NO: 136584

REVISION:

DATE OF ISSUE: NOVEMBER 06, 2013

Technisonic Industries

Limited

240 Traders Boulevard, Mississauga, Ontario L4Z 1W7

Tel: (905) 890-2113 Fax: (905) 890-5338

www.til.ca

This document contains designs and other information which are the property of Technisonic Industries Ltd. This

document may not in whole or in part, be duplicated or disclosed or used for manufacture of the part disclosed herein,

without the prior written permission of Technisonic Industries Ltd.

Summary of content (6 pages)

PAGE 1
T3400 RF Module VHF AM Users Guide DOCUMENT NO: REVISION: DATE OF ISSUE: 136584 NOVEMBER 06, 2013 Technisonic Industries Limited 240 Traders Boulevard, Mississauga, Ontario L4Z 1W7 Tel: (905) 890-2113 Fax: (905) 890-5338 www.til.ca This document contains designs and other information which are the property of Technisonic Industries Ltd.
PAGE 2
INTRODUCTION The T3400 RF module is a VHF AM transceiver assembly that operates in 117.975 - 137 MHz range. The transceiver module is designed to be installed and operated in the Technisonic Multiband Airborne Radio TDFM-9300/9200 platform. All external power and antenna connections are provided by the TDFM 9300 as well as controls are via the front panel and display from the TDFM 9300. The RF module is capable of operating Amplitude Modulation with maximum transmit power of 5 watts.
PAGE 3
NOTES ESD CAUTION This unit contains static sensitive devices. Wear a grounded wrist strap and/or conductive gloves when handling printed circuit boards. FCC COMPLIANCE INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 4
TECHNICAL CHARACTERISTICS Specification Characteristic Model Designation: Physical Dimensions: Operating Temperature Range: Power Requirement: Voltage: Current: Audio Output Power: T3400 Approx. (L) 6.75" x (W) 5.0" x (H) 1.25" -30° C to +60° C 28 VDC ± 5% 300 mA minimum / 1.2A maximum 500 mW into 600 Ω FCC ID: IMA-T3400 INDUSTRY CANADA: 120A-T3400 RF Output Power: 5 Watts, 2.5 (Carrier) Frequency Range 117.975 – 137 MHz TX 117.975 – 137 MHz RX No.
PAGE 5
FCC ID LABELS Before the T3400 is installed in the TDFM-9300, the FCC/INDUSTRY CANADA label must be applied. FIGURE 2: T3400 RF Module with FCC/IC Label applied to the bottom The FCC/Industry Canada label is shown below. Place the label on the bottom of the controller board as shown in Figure 2. FIGURE 3: T3400 FCC/Industry Canada Label INSTALATION The T3400 module should be installed in the TDFM 9300 in accordance with TIL document 136569 “TDFM-9300 FINAL ASSEMBLY SSP".
PAGE 6
WARNING AND DISCLAIMER Changes or modifications not expressly approved by Technisonic Industries could void the user’s authority to operate the equipment. This manual is designed to provide information about the T3400 RF Module. Every effort has been made to make this manual as complete and accurate as possible. WARRANTY INFORMATION The Model T3400 Transceiver is under warranty for one year from date of purchase.