User's Manual

ManualsBrandsTechnisonic Industries ManualsElectronicsTDFM 9000 Series RF Module

T3015 RF Module

P/N127502-2

Users Guide

DOCUMENT NO: 126554

REVISION:

DATE OF ISSUE: DEC. 27, 2012

Technisonic Industries

Limited

240 Traders Boulevard, Mississauga, Ontario L4Z 1W7

Tel: (905) 890-2113 Fax: (905) 890-5338

www.til.ca

This document contains designs and other information which are the property of Technisonic Industries Ltd. This

document may not in whole or in part, be duplicated or disclosed or used for manufacture of the part disclosed herein,

without the prior written permission of Technisonic Industries Ltd.

Summary of content (8 pages)

PAGE 1
T3015 RF Module P/N127502-2 Users Guide DOCUMENT NO: REVISION: DATE OF ISSUE: 126554 DEC. 27, 2012 Technisonic Industries Limited 240 Traders Boulevard, Mississauga, Ontario L4Z 1W7 Tel: (905) 890-2113 Fax: (905) 890-5338 www.til.ca This document contains designs and other information which are the property of Technisonic Industries Ltd.
PAGE 2
INTRODUCTION The T3015 RF module is a Dual Band transceiver assembly that operates in 136-174 MHZ and 450-520 MHz range. The T3015 RF module is a modified Motorola APX 7000 VHF/UHHi portable radio. The outer casing, top controls, front display and keypad are removed. The RF chassis is slightly machined but all electronic circuits are unmodified from the original APX 7000 radio. The transceiver is designed to be installed and operated in a Technisonic Multiband Airborne Radio TDFM 9000 platform.
PAGE 3
NOTES ESD CAUTION This unit contains static sensitive devices. Wear a grounded wrist strap and/or conductive gloves when handling printed circuit boards. FCC COMPLIANCE INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 4
TECHNICAL CHARACTERISTICS Specification Characteristic Model Designation: Physical Dimensions: Operating Temperature Range: Power Requirement: Voltage: Current: Audio Output Power: T3015 Approx. (L) 5.77" x (W) 2.1" x (H) 0.95" -30° C to +60° C 7.5 VDC ± 15% 300 mA minimum / 2.4A maximum 500 mW into 600 Ω FCC ID: IMA-T3015 INDUSTRY CANADA: 120A-T3015 RF Output Power: 1 or 6 Watts (VHF) 1 or 5 Watts (UHF) Frequency Range VHF Band: UHF HI Band: 136 to 174 MHz 450 to 520 MHz No.
PAGE 5
INSTALATION The T3015 module should be installed in the TDFM 9000 in accordance with TIL document 126556 “TDFM-9000 FINAL ASSEMBLY SSP". FCC ID LABELS The T3015 RF module is a modified Motorola APX 7000. Part of the modification requires removal if the original Motorola FCC ID label. After all modifications are done the new Technisonic FCC/IC ID label is applied.
PAGE 6
The FCC/Industry Canada label is shown below. It is mounted on the top near the front of the module. FIGURE 3 T3015 FCC/Industry Canada Label Figure 4 FCC/Industry Canada Label placement on the T3015 Module The T3015 is intended to be mounted in the TDFM 9000 chassis and is not visible. Therefore, a second label must be applied to the outside of the TDFM 9000 that contains the following text: “TDFM 9000 Multiband Transceiver. Contains Module: FCC ID IMA-T3015”.
PAGE 7
WARNING AND DISCLAIMER Changes or modifications not expressly approved by Technisonic Industries could void the user’s authority to operate the equipment. This manual is designed to provide information about the T3015 RF Module. Every effort has been made to make this manual as complete and accurate as possible. WARRANTY INFORMATION The Model T3015 Transceiver is under warranty for one year from date of purchase.
PAGE 8