Important Safety Instructions 1. Read these instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use the speaker near water. 6. Clean only with dry cloth. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS SPEAKER TO RAIN OR MOISTURE. To reduce the risk of electrical shock, fire, etc.: 1. Do not place unit near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 2.
Contents Important Safety Instructions .......................................................................................................... 2 Contents.......................................................................................................................................... 3 Getting Started ................................................................................................................................ 5 Unit Top View ......................................................
Scan settings ......................................................................................................................... 25 Audio Settings........................................................................................................................ 25 Viewing Station Information ................................................................................................... 25 Storing Preset Stations ................................................................................
Getting Started Carefully remove your radio from the box. You may wish to store the packaging for future use. What you can find inside of your package ! Main unit ! Power adapter ! Remote control ! Instruction manual Positioning your Radio Place your radio on a flat / stable surface that is not subject to vibrations. Avoid the following locations: ! Where the radio will be exposed to direct sunlight. ! Where the radio will be close to heat radiating sources.
Using Headphones You will require headphones fitted with a 3.5 mm diameter stereo plug. The Headphones socket is located on the back of this unit. Headphones are not supplied with this radio. Turn down the volume before connecting earphones. Slowly raise the volume with the earphones on until you reach your desired level. # Note: long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume when using earphones, especially for extended periods of time.
Unit Top View 1. 2. 7. NFC sensor Press to switch radio on or standby. 8. Display Turn to adjust volume. 9. DAB/FM antenna MODE button 10. BACK button VOLUME/ knob Press to switch among Internet, Spotify, Music player, DAB, FM, Aux in and 3. Press and hold to store preset station. MENU button Press to recall stored preset station. screen. button Press to skip to previous track in Spotify, Music player and Bluetooth modes.
Unit Front View 1. Speaker 2. Display Unit Back View 1. DAB/FM antenna 2. DC IN socket 3. AUX IN socket 4.
Remote Control Overview 1. button Press to switch radio on or standby. 2. OK button Press to confirm your selection. 3. Navigation buttons up down backward forward 4. VOL +/- buttons Press to adjust volume. 5. MENU button Press to display menu or exit menu. 6. MODE button Press to switch among Internet, Spotify, Music player, DAB, FM, Bluetooth and Aux in modes. 7. INFO button Press to view station information. 8. MUTE button Press to mute or resume sound. 9.
Setup Wizard 1. After setting the language, the display will show ‘Setup wizard’ screen. 2. Press SELECT/TUNE knob to confirm ‘YES' to start setup. Options in the setup wizard include the following: Date/Time Set 12 or 24 hour format Auto update " Update from DAB " Update from FM " Update from Network Select your time zone and daylight savings is needed. " No update Set the date and time is needed. Keep network connected Select YES or NO 3.
b. Turn SELECT/TUNE knob to cycle through the alphanumeric character list, press SELECT/TUNE knob to select an appointed character. # c. Note: WEP/WPA pass codes are case-sensitive. If a wrong operation is being conducted, select to delete designated character. # Note: = Backspace; means return to previous track; radio will automatically save the WEP/WPA you’ve input, so no bother to re-enter these codes. d.
Internet Radio Mode 1. The display will show 'Main menu' after 'Setup wizard' completed. Press SELECT/TUNE knob to select Internet radio mode. 2. While 'Station list' is highlighted, press SELECT/TUNE knob to confirm. → 3. Then refer following section to choice stations. Or if failed to connect to network, please follow: a. Check your Router, see it working normally or not; b. Relocate your radio to a stronger signal position is necessary! c. Make sure your password is correct input.
2. In 'Stations' menu: ! ‘Location’ enables you to choose from the radio stations provided by any country which you choose from a list. a. While 'Location' is highlighted, press SELECT/TUNE knob to confirm. b. Turn SELECT/TUNE knob to select the region you wanted, and then press SELECT/TUNE knob to confirm. c. Using the same method to choose country, station in turn, radio will now loading.
Adding station to ‘My Favourites’ 1. To register your radio with the portal: www.wifiradio-frontier. com. 2. Create account login, enter Access code is required. Access code can be found from “Station list > Help > Get access code". 3. 4. You can add your favourite stations via the portal (www. wifiradio-frontier.com). After you added the stations, in order to have your radio access your new settings, get your radio power off for several minutes is necessary. 5.
5. Preset number ‘ #’ will show on the display. Recalling a Preset Station 1. Press PRESET button to show the saved preset stations. 2. Turn SELECT/TUNE knob to select the preset station you want to play and then press the SELECT/TUNE knob to confirm. 3. Alternatively, press one of Preset buttons 1-10 on the remote control to play the preset station.
Spotify Connect Spotify gives you millions of songs at your fingertips. The artists you love, the latest hits and new discoveries just for you. With Spotify Connect feature, you can play and control all this music wirelessly. Choose music on your smartphone or tablet, and listen on your radio. Your radio has Spotify Connect built in. This lets you control the music playing on your radio using the Spotify app on your smartphone or tablet.
6. The Connect icon will turn green to signify that DigitRadio 510 is now selected and being used for audio playback. 7. Your Spotify app will only recognise DigitRadio 510 when the radio is connected to the internet (i.e. in Internet Radio, Spotify Connect or Music player modes). To use Spotify when your radio is in non-internet modes (i.e. in DAB, FM, Bluetooth or Aux in modes) you need to select Main menu > System settings > Network > Keep network connected > YES.
Music player Mode Setting up a Music Server " In order for your radio play music files from a computer, the computer must be set up to share files or media. " UPnP media sharing allows devices like this radio to play music from a shared media library, navigating through tag menus such as Artist, Album or Genre. " If you are running a suitable server system such as a PC with Windows Media Player10 or later (WMP), and your music library is well-tagged, then it is recommended to use media sharing.
Playing Shared Media 1. Press MODE button repeatedly to select Music player mode. 2. While 'Shared media' is highlighted, press SELECT/TUNE knob to confirm, and then step by step to your selecting music. 3. When a track is playing, you can: a. Press button to skip to previous track; press and hold button to fast reverse current playing track. b. Press button to pause or play current playing track. c.
Clearing My Playlist This feature enables you to clear the contents of your playlist. 1. Press MENU button, turn SELECT/TUNE knob to select 'Clear My playlist', and then press SELECT/TUNE knob to confirm. 2. Select 'YES' to clear my playlist. Prune Servers The Prune Servers feature enables you to remove music servers that are no longer available to you to browse for music. 1. Press MENU button, turn SELECT/TUNE knob to select 'Prune servers', and then press SELECT/TUNE knob to confirm. 2.
DAB Mode Selecting DAB Mode 1. Press MODE button repeatedly to select DAB mode. 2. For initial use, radio will carry out a full scan and store stations list in memory 3. Once the scanning is completed, the DAB/DAB+ stations will be displayed in alphanumeric order. The first station in the list will be selected, press SELECT/TUNE knob to broadcast. # Note: if no DAB/DAB+ signal is found in your area, it may be necessary to relocate your radio to a stronger signal area.
Manual Tune 1. Press MENU button, turn SELECT/TUNE knob to select Manual tune, and then press SELECT/TUNE knob to confirm, the display will show the channel number and frequency. 2. Turn SELECT/TUNE knob to step among the channels and then press SELECT/TUNE knob select the current channel. → # Note: If there is a multiplex corresponding to this channel and frequency, then the display will show a tuning meter with the signal strength and the multiplex name after a few seconds. 3.
Changing Station Order You may want to display the stations in different order. 1. Press MENU button, turn SELECT/TUNE knob to select Station order, and then press SELECT/TUNE knob to confirm. 2. Turn SELECT/TUNE knob to select 'Alphanumeric', 'Ensemble' or 'Valid', and then press SELECT/TUNE knob to confirm your selecting option. Alphanumeric Ensemble Valid Display all stations in alphanumeric order. List currently broadcasting active stations before inactive ones.
Storing Preset Stations Your radio can store up to 10 of your favourite DAB/DAB+ stations. 1. While playing your favourite station, press and hold PRESET button on the main unit until diaplay shows as below: 2. Turn SELECT/TUNE knob to cycle through the preset stations store numbers 1-10. 3. Select one preset station number and then press the SELECT/TUNE knob, display will show ‘Preset stored’. 4.
FM Mode Selecting FM Mode 1. Press MODE button repeatedly to select FM mode. 2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise, the last listened FM station will be selected. 3. To manually change the FM frequency, while FM frequency shows up, turn SELECT/TUNE knob clockwise or anticlockwise to change the frequency by 0.05MHz per step. 4.
Storing Preset Stations Your radio can store up to 10 of your favourite FM stations. 1. While playing your favourite station, press and hold PRESET button on the main unit until diaplay shows as below: 2. Turn SELECT/TUNE knob to cycle through the preset stations store numbers 1-10. 3. Select one preset station number and then press the SELECT/TUNE knob, display will show ‘Preset stored’. 4. Alternatively, press and hold one of Preset buttons 1-10 on the remote control until display shows ‘Preset stored’.
Bluetooth Mode Pair the unit with a Bluetooth device to listen to music: 1. Press the MODE button to select Bluetooth mode. 2. 3. The display will flash in repeatedly. Activate your Bluetooth device and select the search mode. 4. ‘DigitRadio 510’ will appear on your Bluetooth device. 5. Select ‘DigitRadio 510’ and enter “0000” for the password if necessary. 6. 7. The icon will remains steadily on the display when connection is successful. While a track is playing, you can: a.
Aux in Mode AUX IN allows for quick and easy connection to an MP3 player or other external audio sources. 1. Before connecting to the mains socket, use a 3.5mm audio cable (not supplied) to connect to your external audio device through the AUX IN socket on the back of unit. 2. Connect power adapter to mains socket, press VOLUME/ knob to switch unit on. 3. Press MODE button repeatedly to select Auxiliary Input mode. 4. In Aux in mode, you may operate your audio device directly for playback features.
Wireless Device Remote Control App This feature enables you to navigate the radio via iOS device such as iPhone, iPad, iPod Touch. All iOS devices running iOS 3.1.3 or later allow users to control your radio as long as you install it properly. App installation First and foremost, we need to make sure App Store has already installed on your iOS device properly. 1. Create an account on the Apple Store website: http://www.ehow.com/how_4822341_download-apps-iphone.html#ixzz1Y508MZs8 2.
Setting up the connection After downloading the wireless device remote control application, you must set up a connection between the iOS device and your radio. 1. For initial use, tap the 'MyDigitRadio' icon, your device invites you input Pin code, the default code is 1234. You can give a user-defined code via your radio: press MENU button > Main Menu > System setting > Network > NetRemote PIN setup. 2.
General Operation Setting Sleep This feature enables your radio to switch to standby mode by itself after a set sleep time. 1. Press MENU button > Main menu > Sleep, and then press SELECT/TUNE knob to confirm. 2. Turn SELECT/TUNE knob to view options Sleep OFF, 15, 30, 45 or 60 MINS, press 3. SELECT/TUNE knob to confirm. The sleep icon and sleep time will show on the display.
2. Turn SELECT/TUNE knob and then press it to select Normal, Flat, Jazz, Rock, Movie, Classic, Pop, News, My EQ or My EQ profile setup. 3. To set up My EQ, select 'My EQ profile setup ', and then press SELECT/TUNE knob to confirm. Turn SELECT/TUNE knob to select Bass or Treble, and then press SELECT/TUNE knob to confirm. Turn SELECT/TUNE knob to change the value of Bass or Treble, and then press SELECT/TUNE knob to confirm. Press BACK button, display will show ‘Save changes’.
Setting Language This feature enables you to change the language of displaying menu names. 1. Press MENU button > Main menu > System settings > Language, press SELECT/TUNE knob to confirm. 2. Turn SELECT/TUNE knob to select your language, and then press SELECT/TUNE knob to confirm. Factory Reset Doing a factory reset resets all user settings to default values, so time/date and presets are lost. 1. Press MENU button > Main menu > System settings > Factory Reset, press SELECT/TUNE knob to confirm. 2.
Viewing System Info This information may be requested when dealing with technical support issues. 1. Press MENU button > Main menu > System settings > Info, press SELECT/TUNE knob to confirm. 2. Turn SELECT/TUNE knob to view 'SW version', ‘Spotify version’, 'Radio ID' and 'Friendly Name'. Setting Backlight 1. Press MENU button > Main menu > System settings > Backlight, press SELECT/TUNE knob to confirm. 2.
Specifications Items Description: Power Requirements: Specifications Internet, DAB/DAB+ and FM radio with Bluetooth and Spotify Connect AC Input: 110-240Vac, 50-60 Hz DC Output: 18V, 2A Audio Output Power: 10Wrms x 2 Power Consumption: 36W (Max) Dimension (W x H x D): 350mm x 115mm x 132mm This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste.