Instruction Manual DIGITRADIO 306 DAB+ / FM / Radio
SAFETY PRECAUTIONS - Read all the instructions carefully before using the unit and keep them for future reference. Check that the voltage marked on the rating label matches your mains voltage. The unit must be placed on a flat stable surface and should not be subjected to vibrations. Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over. The mains socket must be located near the unit and should be easily accessible.
product overview Front View 1. 2. 3. 4. 5. Display MENU/INFO Button TUNE Button STANDBY Button MODE Button 6. VOLUME/SELECT Knob 7. ALARM Button 8. DIMMER/SNOOZE Button 9. PRESET Button 10. SLEEP Button Rear View 11. Rod Antenna 12. Earphones Jack 13. AUX IN Jack 14.
GETTING START Powering ON/OFF When you first connect the unit to the mains adapter cable, the unit will be in standby mode after showing “Welcome to Digital Radio” (F.1)(F.2) 1. Press the Standby button to switch the unit on. 2. Press the Standby button to switch the unit back to standby mode. F.1 Selecting Modes Press the MODE button repeatedly to switch between FM, Auxiliary Input and DAB modes. Navigating the Menu 1. Press and hold the MENU/INFO to access the menu. 2.
Language 1. During System mode, turn the VOLUME/SELECT Knob to select Language and then press the same knob to confirm. 2. Turn the VOLUME/SELECT Knob to change the display language of your choice. 3. Press the same knob to confirm. Factory Reset There may be times when you need to reset your unit back to the factory settings especially when you have moved house. If you experience reception problems you may want to reset and try again.
DAB Operation Press the MODE button repeatedly to select DAB. The unit will enter DAB mode and perform the auto scan function. During the scan the display will show “Scanning… ” together with a slide bar that indicates the progress of the scan and the amount of stations that have been found so far. Once the scan has finished, the unit will select the first alpha numerically found station. To explore the found stations, turn the VOLUME/SELECT Knob to select and press the same knob to confirm.
2. Turn the VOLUME/SELECT Knob to select preset number and press the same knob to confirm. Recalling a Stored Station 1. To select a preset, press the PRESET button, and then turn the VOLUME/SELECT Knob to select one of the listed preset stations. 2. Press the same knob to confirm the selection. Operation of Preset and Recall stations are same for DAB and FM. FM Operation Switching from DAB to FM Mode To switch the unit to FM mode, press the MODE button repeatedly to switch to FM mode.
Audio setting 1. Press and hold the MENU/INFO button to access FM menu. 2. Turn the VOLUME/SELECT Knob to select “Audio setting” and then press the same knob to confirm. 3. Turn the VOLUME/SELECT Knob to select “Stereo allowed” or “Forced mono” and then press the same knob to confirm. AUX operation There is an “AUX IN” socket located at the back of the unit. Analogue audio sound signals from other sources can be input to the unit through this socket. F.5 1.
Snooze Snooze allows you to temporarily silence a sounding alarm. The radio returns to standby for the set time period with Snooze countdown displayed. When the countdown reaches 0(zero) the alarm triggered again. 1. When the alarm is sounding, press the DIMMER/SNOOZE button once. 2. You can change the snooze period by repeatedly pressing the DIMMER/SNOOZE button, Snooze periods are 5,10, 15 or 30 minutes. Dimmer The display has a dimmer setting with four brightness - Off / Low / Medium / High.