Manual DigitRadio 100 Digitalradio Adapter for DAB/DAB+
Contents Pictures Safety of the appliance Security Setting up the device Disposal Guidelines and standards Properties of the device Preparing the device for operation Improve antenna reception Usage of headphones The way of replace batteries: DAB mode What is DAB? DAB Mode Turn on Shift to another DAB/DAB+ Station Update Stations List To Show the Signal Strength Manual tune The way to Prune DRC (Dynamic Range Control) value View Station Information FM Mode Tune in FM Mode Sca
Bluetooth Mode Shift to Bluetooth mode Pairing with Bluetooth devices To perform pairing with a Bluetooth device To pair additional devices Clearing memory General Settings Set Sleep Set Time Set Alarm Postpone Alarm: Turn off Alarm: To cancel the Alarm: Set Language SW Version Factory Reset Specification 3 13 13 13 13 13 13 14 14 14 14 15 15 15 15 15 15 16
Pictures Line out socket: It is for inserting 3.5mm earphone. Power cord Connect to DC adaptor. Socket: Antenna Please use the power adaptor provided by manufacturer only. socket: Power button Connect to the provided antenna. Press to turn on radio, press again to standby mode.
Control All mode Press to turn on radio, press again to enter standby mode When alarm sounds, press to turn alarm off SNOOZE When alarm is sounding, press to postpone alarm ALARM 1, ALARM 2 Press to enter Alarm 1 or Alarm 2 setting SLEEP Press to enter sleep time setting CLOCK Press to set time and date DRC DIMMER DAB mode: press to set DRC level Press to adjust backlight Bluetooth mode: press to previous track, press to next track, press to play/pause MENU Press to enter menu SCAN Press to s
Safety of the appliance Please read all the safety instructions carefully and save this manual for future reference. Always follow all warnings and instructions in this manual and on the back of the device. Security • The device should be connected only through the AC adapter to a mains voltage of 230 V, 50 Hz power. Never attempt to operate the unit with a different voltage. • If the power supply of the device is defective or if the device has other damage, it should not be put into operation.
Disposal Risk of suffocation • Risk of suffocation due to the Packaging and its parts for children. Disposal of packaging • The packaging of your device consists entirely of recyclable materials. Please follow these sorted according to the “Dual System”. • About current means of disposal contact your dealer or at your community waste facility. Disposal of the appliance • Old appliances are not worthless rubbish. By recycling valuable raw materials can be recovered.
Guidelines and standards • This product meets guidelines and standards -- the Low Voltage Directive ( 2006/95/EC ), -- the EMC Directive (2004/108/EC ) and the -- CE Mark Directive. Your unit carries the CE mark and complies with all relevant EU standards. Package Contents Please make sure that all items shown below are available : • DAB / DAB FM Clock Radio with wire antenna, • Power Supply, 6V, 500 mA, • Manual.
the end of the wired antenna to fix this in the required position for a better reception. Usage of headphones Using headphones may damage your hearing! Do not listen to the radio at high volume through headphones. This can lead to permanent hearing damage. Before using headphones adjust the sound volume to the minimum level if you (not supplied ) to connect a pair of headphones, the internal speaker is muted. >Use only headphones with 3.5mm stereo plug.
below the so-called hearing threshold can be filtered out of the signal to be transmitted. This leads to a reduction of the transmitted data stream, without any noticeable difference in sound to the listener ( MUSICAM ) process. Audio Stream Audio streams are continuous data flows, MPEG 1 Audio Layer 2 frames contain and thus represent acoustic information in digital radio. Thus, familiar radio programs can be transferred and listen at the receiver side.
SELECT to confirm and then your radio will connect the selected station. Update Stations List Simply press SCAN, or, press MENU, then press or to ‘Full scan’, press SELECT to confirm. To Show the Signal Strength During playing a DAB/DAB+ program, repeatedly press INFO until the LCD screen display shows a signal bar with the strength of the current station. The indicator on the signal bar shows the minimum acceptable signal level.
Press DRC button repeatedly, and press SELECT to confirm while your preferred option is appeared. View Station Information It is possible to view the information that is displayed on the second line of the display when listening to a DAB/DAB+ or FM program by pressing INFO repeatedly. FM Mode Tune in FM Mode 1. Press MODE buttons to enter FM mode. 2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise, the last listened FM station will be selected. 3.
2. Press or to ‘Forced mono’, press SELECT to confirm. Station Presets (for DAB/DAB+ and FM mode) Note: Your radio can store 12 DAB/DAB+ and 12 FM stations preset. While playing your favourite station, press and hold one of PRESETS button 1- 12 to store current station, then radio will shows “Preset # stored” Preset Recall (for DAB/DAB+ and FM mode) To select a stored station, press one of PRESETS button 1- 12, then radio will go directly to relative preset station.
eight devices and an additional device is paired, the earliest paired device is deleted from memory. Do factory reset will clear Bluetooth memory. General Settings Set Sleep 1. Press MENU press or to < Sleep >, then press SELECT to confirm. 2. Press or to define the sleep period: off/15/30/45/60/90 minutes. 3. When your selecting period is appeared, simply stop pressing, and it is done. Note: At this step, and sleep icon shows up, as well as shows how long it will be expired. 4.
On Time: 00:00 (alarm sound time ) Duration Time: 15/30/45/60/90 mintues Note: The alarm will sound until the selected duration time is finished if nobody stop it.. Source: DAB, FM and Buzzer Set Days: Daily, Once, Weekends or Weekdays Volume level: remember don’t have your radio volume level to zero (Mute), otherwise, when alarm is coming, it won’t be heard. Postpone Alarm: When alarm is coming, press SNOOZE to postpone alarm for 5 minutes.
2. Press or to ‘Yes’, and then press SELECT to confirm. Specification ITEMS Specifications: Frequency Ranges: DESCRIPTION DAB/DAB+, FM Digital radio FM: 87.5-108MHz DAB+: 174.928 – 239.200MHz LCD Display: High resolution display Power Supply: AC Power Input: 100-240VAC, 50-60Hz Output: 6VDC, 500mA Dimension (L x W x H): 130mm x 42mm x 95mm Notes Your device bears the CE symbol and complies with all requisite EU standards.
