Certificates

EU-Konformitätserklärung
Für nachfolgend bezeichnete(s) Erzeugnis(se)
Name:
Beschreibung:
Artikel-Nr.:
Bild:
DIGITRADIO 4C, schwarz/silber
DIGITRADIO 4C, weiß
Radioempfänger mit DAB+ / UKW / Bluetooth, ext.
Netzteil, Teleskopantenne, Montagewerkzeug,
Fernbedienung, 2x AAA Batterie, Garantiekarte,
Bedienungsanleitung, Verpackung
0000/3937
0001/3937
wird hiermit - in Anerkennung der alleinigen Verantwortung für die Ausstellung dieser Erklärung - durch die
TechniSat Digital GmbH Daun, Julius-Saxler-Straße 3, 54550 Daun (www.technisat.com)
die Konformität mit den wesentlichen Schutzanforderungen der Funkrichtlinie 2014/53/EU und den weiterhin aufgeführten Vorschriften bestätigt.
Für die Konformitätsbewertung wurden herangezogen:
Nummer & Stand
Titel / Gegenstand
Fundstelle EU-Amtsbl.
2014/53/EU:2014-05
Directive relating to the making available on the market of radio equipment
and repealing Directive 1999/5/EC
L 153/62-106, 22.5.2014
EN 62368-1:2014
Audio/video, information and communication technology equipment - Part 1: Safety
requirements
2018/C 326/02 (*)
EN 62479:2010
Assessment of the compliance of low power electronic and electrical equipment
with the basic restrictions related to human exposure to electromagnetic fields (10
MHz to 300 GHz)
2018/C 326/02 (*)
EN 55032:2012
Electromagnetic compatibility of multimedia equipment - Emission requirements
2018/C 246/01 (**)
EN 55035:2017
Electromagnetic compatibility of multimedia equipment - Immunity requirements
L 206/27-30, 6.8.2019 (**)
EN 61000-3-2:2014
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current
emissions (equipment input current <= 16 A per phase)
2018/C 246/01 (**)
EN 61000-3-3:2013
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage
changes, voltage fluctuations and flicker in public low-voltage supply systems, for
equipment with rated current <=16 A per phase and not subject to conditional
connection
2018/C 246/01 (**)
EN 301 489-1 V1.9.2 (2011-09)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1: Common
technical requirements
2018/C 246/01 (**)
EN 300 328 V2.1.1 (2016-11)
Wideband transmission systems; Data transmission equipment operating in the 2,4
GHz ISM band and using wide band modulation techniques; Harmonised Standard
covering the essential requirements of article 3.2 of Directive 2014/53/EU
2018/C 326/04 (***)
EN 301 489-17 V2.2.1 (2012-09)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for
Broadband Data Transmission Systems
2015/C 125/01 (***)
ETSI EN 303 345 V1.1.7 (2017-
03)
Broadcast Sound Receivers; Harmonised Standard covering the essential
requirements of article 3.2 of Directive 2014/53/EU
(***)
2009/125/EC:2009-10
Directive on framework for ecodesign requirements for energy-related
products
L 285/10-35, 31.10.2009
(EC) 1275/2008:2008-12
Commission Regulation with regard to ecodesign requirements for standby and off
mode, and networked standby, electric power consumption of electrical and
electronic household and office equipment
L 339/45-52, 18.12.2008
(EC) 278/2009:2009-04
Commission Regulation implementing Directive 2005/32/EC with regard to
ecodesign requirements for no-load condition electric power consumption and
average active efficiency of external power supplies
L 93/3-10, 7.4.2009
2011/65/EC:2011-07
Directive on the restriction of the use of certain hazardous substances in
electrical and electronic equipment
L 174/88-110, 01.07.2011
EN 50581:2012
Technical documentation for the assessment of electrical and electronic products
with respect to the restriction of hazardous substances
2012/C 363/05
(*) bzgl. 2014/53/EU, Art. 3.1 (a)
(**) bzgl. 2014/53/EU, Art. 3.1 (b)
(***) bzgl. 2014/53/EU, Art. 3.2
Diese Erklärung wird verantwortlich für den o.g. Hersteller und in seinem Namen unterzeichnet durch:
Ausstellungsort:
Daun
Ausstellungsdatum:
06.08.2019
Aussteller:
Harald Brück
Funktion:
Leiter Technik
Unterschrift: