Important Information : WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN To reduce the risk of electric shock, do not remove cover {or back). No user serviceable parts inside. Refer servicing to qualified service personnel, This symbol indicates This symbol indicates “dangerous voltage” inside important instructions the product that presents a accompanying the risk of electric shock or product. personal injury. WARNING To reduce the risk of fire ur electric shock, do not expanse this product fo rain ar moisture.
Table of Contents Chapter 1: Connections and Setup Things to Consider Before You Connect eee. Protect Against Power Surges Protect Components from Overheating Position Cables Properly to Avoid Audio Interference Connection Pictures... Audio System Requirements .
Table of Contents Point the Remote in the Right Direction to Control the Component You Want cu. Playing Music through the Lyra Wireless. Fine Tuning the Lyra Wireless If there is no signal at all If the signal is weak or there is interference Improving Performance Orientation of the Antennas com. Using the Remote with Music Match. Launching Music Match , Music Sources Playing Music ..
Chapter 1: Connections and Setup Chapter 1: Connections and Setup Things to Consider Before You Connect Protect Against Power Surges * Connect all components before you plug any of their power cords into the wall outlet, + Turn off all components before you connect or disconnect any cables. Protect Components from Overheating + Don't block ventilation holes on any of the components. Arrange the components so that air can circulate freely. * Don't stack components.
Chapter 1: Connections and Setup Audio System Requirements * Audio receiver with auxiliary inputs {line level) or other component with audio inputs (TV, VCR, teeter. ‘ Computer System Requirements Windows® PC Requirements * Pentium 300MHz or higher * Windows" 98SE, Me, 2000, or XP ¢ Microsoft Internet Explorer 5.
Chapter 1: Connections and Setup Unpack the box and check our parts All of the items shown below should have come packed in the box with your Lyra Wireless, Lyra Wireless Transmitter Lyra Wireless Receiver Remote control and batteries Music Management CD Contains the Lyra Wireless remote control Larger power supply for Smaller power supply software and Matchstick software (for transmitter unit for receiver unit Windows only) Part number: §-4146 Part number: 5-4147 Mini-B USB cable Line out cable Part number
Chapter 1: Connections and Setup Front of the Lyra Wireless Units Remote control] antenna Power indicator Antenna Transmitter Back of the Lyra Wireless Units Power jack ON switch CHANNEL USB jack switch Signal Strength indicators Power indicator Antenna Receiver Power jack CHANNEL © LINE OUT jack Transmitter Remote control antenna tiara g Receiver Chapter 1
Chapter 1: Connections and Setup Connecting the Lyra Wireless Transmitter to your Computer 1. Connect the small end of the USB cable to the USB jack on the back of the Lyra Wireless transmitter and the other end to the USB jack on your computer. 2. Connect the small end of the large power supply to the power jack on the back of the Lyra Wireless transmitter and the other end into an AC outlet. 3. Make sure the ON switch is set to ON (the power indicator comes on). 4.
Chapter 1: Connections and Setup Connecting the Lyra Wireless Receiver to your Audi Receiver 1. Connect the small end of the audio cable to the LINE OUT jack on the back of the Lyra Wireless receiver and the other ends (the red and white plugs) to the Audio Input jacks {sometimes labeled Aux or Line ) on your audio receiver. Alas, make sure to put your audio receiver in the right mode to receive the sound from those jacks. 2.
Chapter 1: Connections and Setup Improving Performance Orientation of the Antennas Proper orientation of the antennas is important for good performance. You may fired that the system works better with one or more of the antennas in the horizontal {flat} position. The receiver and transmitter tend to operate better in high locations, where the signal path is wider and stronger (on a shelf, for example). Watch the receiver signal strength indicators for indication of signal strength.
Chapter 1: Connections and Setup If the signal is weak or there is interference Try changing the channel on both units. Make sure the CHANNEL switch is set to the same channel an both units.
Chapter 2: Music Match and the Lyra Wireless Chapter 2: Music Match and the Lyra Wireless Install the software on your computer In order to play music through the Lyra Wireless system, you need to install some software first, The Music Management CD that came with your Lyra Wireless contains all of the necessary software components you need.
Chapter 2: Music Match and the Lyra Wireless {remains ar ae clr pm i The Lyra Wireless Quick Start serene. The Music Match Jukebox Setup screen. 9. When the remote control software installation is complete, click Install MUSIC MATCH Jukebox on the Lyra Wireless Quick Start screen to install Music Match. 10. When the Musicale Jukebox Setup screen appears, click Next to begin setup. Note: tis recommended ta uninstall ony previous installations of the Musicality Jukebox software before proceeding.
Chapter 2: Music Match and the Lyra Wireless The Music Match icon found in your computer's system tray. understate scr ERR He pms The Music Match Jukebox Getting Started serene, Launching Music Match The Music Match software converts audio files to the MP3 format so you can play them on your Lyra Wireless.
Chapter 2: Music Match and the Lyra Wireless Launching the Remote Control Software The remote control software is automatically launched every time you start your computer, but if you need to launch it manually, follow these steps: If you have Windows 98SE, 2000, or Me 1... Click on the Start icon in the lower left-hand comer of your screen. 2. Select Programs, followed by RCA Lyra Wireless, If you have Windows XP 1. Click on the Start icon in the lower left-hand corner of Your screen. 2.
Chapter 2: Music Match and the Lyra Wireless Audio Setup Depending on how your computer is currently set up, you may have to make some adjustments so that the music and sound are directed to the right places. You may need to make sure Music Match is configured properly, too. Settings in Musicale 1. Make sure the Music Match application is launched on your computer. If it's not, press the LYRA WIRELESS button on the remote. 2. From Music Match's main menu, click on Options and then Settings. 3.
Chapter 2: Music Match and the Lyra Wireless Sound card Settings in Your Computer's Control Panel Note: This setting is to configure the chime sound ond Windows sound prompts to ploy through your computer's sound card. If you want them fo play through the Lyra Airless, select USB Audio Device for Lyra Wireless, for Windows XP) under the preferred device setting. If you have Windows 98SE or Me 1. Click on the Start icon in the lower left-hand corner of your screen. 2.
Chapter 2: Music Match and the Lyra Wireless If you have Windows XP 1. Click on the Start icon in the lower left-hand corner of your screen. 2. Select Settings, followed by Control Panel {the Control Panel window appears}. Fe : 3. Double click on the Sounds and Audio Devices icon, and adding select the Audio tab, $8 lay cei (040) x] 4 4. Click on the arrow under Default device and make sure your sound card is selected, ME yc dado The sound card settings screen for Windows XP.