MARS TECH LIMITED EXHIBIT A [FCC Ref. “Installation and Operating Instructions Furnished to the User” Thomson Multidimensional EXHIBIT A FCC ID: COWARDICE. Mars tech Report No.
Lyra Wireless User's Guide FCC 1D: GOS-RDIGOWA Mars tech Report No. 222010 EXHIBIT AD) Changing Entertainment. Again.
Important Information WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN Ta reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates This symbol indicates “dangerous voltage” inside important instructions the product that presents a accompanying the risk of electric shock or product. personal injury. WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
Table of Contents Chapter 1: Connections and Setup Things to Consider Before You Connect wee esessecesssrmssesenaees 3 Protect Against Power Surges... Protect Components from Overheating Position Cables Properly to Avoid Audio Interference . Connection Pictures... Audio System Requirements ..
Table of Contents Point the Remote in the Right Direction to Control the Component You Want Playing Music through the Lyra Wireless. Fine Tuning the Lyra Wireless if there is no signal at all If the signal is weak or there is interference Improving Performance Orientation of the Antennas Using the Remote with Music Match Launching Music Match .
Chapter 1: Connections and Setup Chapter 1: Connections and Setup Things to Consider Before You Connect Protect Against Power Surges * Connect all components before you plug any of their power cords into the wall outlet. off all. components before you connect or disconnect any cables: Protect Components from Overheating * Don't block ventilation holes on any of the components. Arrange the components so that air can circulate freely.
Chapter 1: Connections and Setup Audio System Requirements * Audio receiver with auxiliary inputs (line level) or other component with audio inputs (TV, VCR, teeter. Computer System Requirements Windows® PC Requirements » . ses» Pentium 300MHz or higher Windows" 98SE, Me, 2000, or XP Microsoft Internet Explorer 5.
Chapter 1: Connections and Setup Unpack the box and check your parts All of the items shown below should have come packed in the box with your Lyra Wireless.
Chapter 1: Connections and Setup Front of the Lyra Wireless Units Remote control antenna Power indicator Antenna Transmitter Back of the Lyra Wireless Units Power jack ON switch CHANNEL USB jack Signal Strength indicators Power indicator Antenna Receiver Power jack CHANNEL LINE QUT jack sw / switch / § \ Transmitter Remote control antenna Receiver Chapter 1
Chapter 1: Connections and Setup Connecting the Lyra Wireless Transmitter to your Computer 1. Connect the small end of the USB cable to the USB jack on the back of the Lyra Wireless transmitter and the other end to the USB jack on your computer. 2. Connect the small end of the large power supply to the power jack on the back of the Lyra Wireless transmitter and the other end into an AC outlet. 3. Make sure the ON switch is set to ON (the power indicator comes on). 4.
Chapter 1: Connections and Setup O TT Connecting the Lyra Wireless Receiver to your Audio Receiver 1. Connect the small end of the audio cable to the LINE OUT jack on the back of the Lyra Wireless receiver and the other ends (the red and white plugs) to the Audio Input jacks {sometimes labeled Aux or Line } on your audio receiver. Also, make sure to put your audio receiver in the right mode to receive the sound from those jacks. 2.
Chapter 1: Connections and Setup Improving Performance Orientation of the Antennas Proper orientation of the antennas is important for good performance. You may find that the system works better with one or more of the antennas in the horizontal (flat) position. The receiver and transmitter tend to operate better in high locations, where the signal path is wider and stronger {on a shelf, for example). Watch the receiver signal strength indicators for indication of signal strength.
Chapter 1: Connections and Setup if the signal is weak or there is interference Try changing the channel on both units, Make sure the CHANNEL switch is set to the same channel on both units. Avoiding Interference Cordless Phone and Baby Monitor Interference The transmitter.
Chapter 2: Music Match and the Lyra Wireless Chapter 2: Music Match and the Lyra Wireless Install the software on your computer In order to play music through the Lyra Wireless system, you need to install some software first. The Music Management CD that came with your Lyra Wireless contains all of the necessary software components you need.
Chapter 2: Music Match and the Lyra Wireless 9. When the remote control software installation is complete, click Install MUSIC MATCH Jukebox on the Lyra Wireless Quick Start screen to install Music Match, wienie TE : The tirelessness Quick Start screen. 10. When the Music Match Jukebox Setup screen appears, click Next to begin setup. Note: It fs recommended to uninstall any previous installations of the Music Match Jukebox software before proceeding.
Chapter 2: Music Match and the Lyra Wireless The Musicale can found in your computer's system tray. Sevumrriai RS Em ni SEN tho mya TS ana SEE SER The Music Match Jukebox Getting Started screen, Launching Music Match The Musicianship software converts audio files to the MP3 format so you can play them on your Lyra Wireless, This section describes some basic Musicale features and explains how to convert music to the MP3 format.
Chapter 2: Music Match and the Lyra Wireless The Lyra Wireless Remote Control icon found in your computer's system tray. The Lyra Wireless software menu. Launching the Remote Control Software The remote control software is automatically launched every time you start your computer, but if you need to launch it manually, follow these steps: If you have Windows 98SE, 2000, or Me 1. Click or the Start icon in the lower left-hand corner of your. screen. 2. Select Programs, followed by RCA Lyra Wireless.
Chapter 2: Music Match and the Lyra Wireless Audio Setup Depending on how your computer is currently set up, you may have to make some adjustments so that the music and sound are directed to the right places. You may need to make sure Musicale js configured properly, too. Settings in Music Match To Make sure the Music Match application is launched on your computer. If it's not, press the LYRA WIRELESS button on the remote. 2. From Music Match's main menu, click on Options and then Settings. 3.
Chapter 2: Musicale and the Lyra Wireless Sound card Settings in Your Computer's Control Panel Note: This setting Is to configure the chime sound and Windows sound prompts to ploy through your computer's sound card If you want them to ploy through the Lyra Airless, select USB Audio Device {or Lyra Wireless, for Windows XP) under the preferred device setting, I you have Windows 98SE or Me 1. Click an the Tort icon in the lower left-hand corner of your screen. 2.