GAMING CHAIRS ASSEMBLY INSTRUCTIONS Thank you for purchasing our product SERIES MODELS TSF44 Echo TSF71 Lux TS42 GG TS51 TS70 Geo TS43 ProGamer2 TS90 TS92 GameMaster TS83 Cow Print TS85 Pastel TS86 (General representation of our gaming chairs. The styles, materials, colors and features vary with series and models) REV.
P.1 TS42, TS43, TS51, TS70,TS83, TS85, TS86, TS90, TS92, TSF44, TSF71 Missing, damaged and defective parts can be replaced at no cost to you. Please refer to the last pages on this manual. Do a quick inventory of all the parts and hardware listed below P.1 The replacement parts service is limited to the 48 contiguous United States. If you reside in AK, HI, PR, U.S. territories or other countries, please contact the supplier from where the unit was purchased.
P.2 TS42, TS43, TS51, TS70,TS83, TS85, TS86, TS90, TS92, TSF44, TSF71 P.2 BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. • Do not discard this manual or any of the packaging material until the unit has been completely assembled. • If during assembly you find an issue or need clarification, please contact our Customer Service for assistance. Please refer to the last pages on this manual.
TS42, TS43, TS51, TS70,TS83, TS85, TS86, TS90, TS92, TSF44, TSF71 P.3 P.3 ASSEMBLY STEPS STEP 1 Hardware M8x20 4 Pcs O-ring 4 Pcs Washer 4 Pcs Felt gasket 4 Pcs L O P Q Flip over the seat B and place the felt gaskets Q over the innermost holes in the middle and back of the frame. Place the mechanism D over the felt gaskets, making sure its tension knob faces towards the FRONT.
P.4 TS42, TS43, TS51, TS70,TS83, TS85, TS86, TS90, TS92, TSF44, TSF71 STEP 4 STEP 5 Join the base parts to the seat making sure the tip of the lift E enters correctly into the hole of the mechanism D. Hardware M8x25 4 Pcs O-ring 4 Pcs Washer 4 Pcs M O P P.4 Assemble the backrest A to the metal brackets on the seat B with screws M, O-rings O and washers P, making sure the O-ring go in the middle of the hardware set.
P.5 TS42, TS43, TS51, TS70,TS83, TS85, TS86, TS90, TS92, TSF44, TSF71 P.5 CHAIR'S FUNCTIONS 1 2 3 4 ! 5 To raise or lower the chair’s height, pull UP the lever that is under the seat on the right side. The chair goes down while sitting on it, or up if you lift your body. The chair also tilts by pulling OUT the same lever to unlock, but please note that unlike regular chairs, gaming chairs have their balance centered farther back, so the chair feels harder to tilt.
P.6 TS42, TS43, TS51, TS70,TS83, TS85, TS86, TS90, TS92, TSF44, TSF71 P.6 TECHNI SPORT CHAIR WARRANTY GAMING CHAIR: 2-YEAR WARRANTY INTERNAL METAL FRAME*: LIFETIME WARRANTY RTA Products, LLC has warranted the Techni Sport products to the original purchaser who acquired a new product from RTA Products or its authorized re-sellers of the product against defects in material or workmanship.
Your satisfaction is very important to us. Our Support agents can help you with any issues you may have, please feel free to contact us with any questions you have about our products, or to request replacement parts. FOR ADDITIONAL INFORMATION PLUS HELP OPTIONS VISIT: WWW.TECHNISPORTUSA.COM AND CLICK ON INFO/SUPPORT Scan the following QR Code to send us a message: EMAIL US: support@technisportusa.