L-SHAPE HOME OFFICE TWO-TONE DESK WITH STORAGE MODEL RTA-739DL ASSEMBLY INSTRUCTIONS Thank you for purchasing our product Scan QR to view full assembly video Please note that this product comes packaged in 2 separate boxes BO X1 BO OF 2 X2 OF 2 REV.
P.1 • RTA-739DL This product comes split in 2 separate boxes. • The product assembles ONLY as shown in the front page, with the drawers on the LEFT and the shelves on the RIGHT. The sections are not interchangeable. • Do not discard this manual or any of the packaging material until the unit has been completely assembled. • Please read carefully the assembly instructions before the installation. • The assembly might require of 2 persons for certain steps.
RTA-739DL P.2 Do a quick inventory of all the parts and hardware listed below Missing, damaged and defective parts can be replaced at no cost to you. Please refer to the last pages on this manual. P.2 The replacement parts service is limited to the 48 contiguous United States. If you reside in AK, HI, PR, U.S. territories or other countries, please contact the supplier from where the unit was purchased. MAIN PARTS LIST 1 Right frame Left frame x1 x1 5 2 3 x1 Left-bottom-back tube x1 27.
RTA-739DL P.3 P.3 MAIN PARTS LIST (Continue) 16 17 Right tabletop x2 x1 18 Left panel 19 Right panel 20 x1 x1 22 Right shelf panel Drawer front panel 23 Drawer left panel 24 Drawer right panel x3 x3 26 27 Sliders*, 4 pcs per set x3 RIGH Sets T LEF Bottom panel x1 x1 x3 Drawer bottom x3 board 21 Back panel 25 Drawer back panel x3 * 24 pcs of screws D come packaged together with these pieces.
RTA-739DL P.4 P.
RTA-739DL P.5 P.5 HARDWARE LIST PART QTY ITEM A 20 M5x42 bolts B 20 Ø15x12 Cam locks C 8 Ø8x40 Dowels D* 40* M3.
RTA-739DL P.6 P.6 THE ASSEMBLY STEPS START ON PAGE 8 CAM BOLT AND CAM LOCK TUTORIAL THE INSTRUCTIONS BELOW ARE NOT ACTUAL ASSEMBLY STEPS This unit uses cam bolts and locks (also known as mini fixes). If you are not familiar with this kind of hardware, the below is a tutorial that explains how to use them on the steps where they are required. 1. Screw the bolt into the indicated hole on the panel indicated in the assembly step. 2. Join the other panel (with the big hole) to the panel with the bolt.
P.7 RTA-739DL P.7 BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. • Do not discard this manual or any of the packaging material until the unit has been completely assembled. • If during assembly you find an issue or need clarification, please contact our Customer Service for assistance. Please refer to the last pages on this manual. On each step, read the instructions throughly and analyze the illustrations before proceeding to do the assembly.
RTA-739DL P.8 P.8 ASSEMBLY STEPS WE RECOMMEND TO PLACE THE PIECES OVER BLANKETS TO PROTECT THEIR FINISH DURING ASSEMBLY. STEP 1 Grab all the sets of sliders 27 and separate them into 2 groups accordingto their shape: The “Flat” ones will be used on the next step. The “L Shaped” won't be used until step 18, so set them aside. RIG RIG HT LE FT HT (Front) (Front) The “Flat” ones will be used on the next step. STEP 2 Hardware D M3.
RTA-739DL P.9 STEP 3 Hardware A M5x42 4 Pcs B C 4 Pcs Ø8x40 4 Pcs Tools (included) Tools (NOT included) P.9 • FIRST Insert the dowels C into the indicated holes on panel 20. • THEN attach the bolts A into the indicated holes on panels 18 and 19. • LAST join the panels 18 and 19 to panel 20, insert the cam locks B on panel 20 and turn them to locka the pieces as explained in page 6. SECOND A 20 (Front) 19 FIRST C LAST Cam locks alignment on 20 18 Do not stick out more than 10mm Max.
RTA-739DL P.10 STEP 5 Hardware D M3.5x14 P.10 Attach the feet 12 to the bottom panel 21 with screws D. 16 Pcs Tools (included) D . 12 21 21 STEP 6 Hardware F L M6x12 3 Pcs Bring the cabinet upright and attach the brackets L to panel 19 facing UP with screws F.
RTA-739DL P.11 STEP 7 Hardware F G P.11 DO NOT TIGHTEN ANY SCREWS UNTIL THE END OF STEP 13. M6x12 3 Pcs M6x40 3 Pcs • Place the tubes 5, 6 and 7 on top of the brackets L in their respective positions and assemble them with screws F as shown. • Assemble the leg 3 to the tubes 5, 6 and 7 with screws G. Tools (included) Tubes go ON TOP of the brackets L F 5 7 G 3 6 FROM STEP 7 TO 10, PAY ATTENTION TO THE ORIENTATION OF THE HOLES ON THE TUBES.
RTA-739DL P.12 STEP 9 Hardware F H M6x12 1 Pc M6x30 8 Pcs P.12 • Assemble the shelves 17 to the frames 1 and 2 with screws H from underneath as shown. • Attach the hook 13 to the frame 1 with screw F from inside. 2 Tools (included) 1 13 F 17 (View from inside) (Front) (Back) 17 STEP 10 Hardware G M6x40 6 Pcs Tools (included) H Use screws G to: • Assemble the tubes 8 and 9 to the leg 4 in their respective positions. • Assemble the tube 10 to tube 7.
RTA-739DL P.13 STEP 11 This step requires of 2 persons Hardware H M6x30 15 Pcs P.13 • With the help of another person, place the corner top 15 and the right tabletop 16 over the structures. • Using screws H from underneath, secure the corner top 15 to the tubes 3, 4, 5, 7 and 8, and secure the right tabletop 16 to the frames 1 and 2 and to the tubes 8 and 10, but LEAVE THEM ALL LOOSE to allow flexibility and be able correct any misalignments later on.
RTA-739DL P.14 STEP 13 This step requires of 2 persons Hardware 4 Pcs B C H Ø8x40 4 Pcs M6x30 4 Pcs Tools (included) Tools (NOT included) P.14 FIRST insert the dowels C into the indicated holes on the side panels 18 and 19. • THEN, and with the help of another person, carefully place the left tabletop 14 over the frame, making sure the bolts and dowels connect into the . corresponding holes on these 3 panels.
RTA-739DL P.15 STEP 14 Hardware I M5x40 12 Pcs P.15 For each of the 3 drawers, assemble the side panels 23 and 24 to the back panel 25 with screws I. Please note the alignment of the grooves atthe bottom of the panels. Tools (included) 23 25 24 STEP 15 For each of the 3 drawers, slide the bottom panel 26 through the grooves of the side panels and into the back panel as shown.
RTA-739DL P.16 STEP 17 Hardware A M5x42 12 Pcs P.16 For each of the 3 drawers, assemble the front panel 22 to panels 23 and 24 with bolts A and cam locks B as explained in page 6. Please note that the bottom panel 26 will enter into the groove of panel 22. 12 Pcs B A Tools (included) 22 23 B 26 24 STEP 18 Hardware D M3.
RTA-739DL P.17 P.17 WEIGHT LIMITS 88 Lbs (40 Kg) 88 Lbs (40 Kg) 88 Lbs (40 Kg) 11 Lbs (5 Kg) 66 Lbs (30 Kg) WARNINGS Do not exceed the indicated weight limits. Do not expose the surfaces to direct sunlight or to extreme environmental conditions. Do not use solvents or abrasive materials to clean the unit. Do not sit on the unit or lean against it. Do not allow small children to play under or over the unit. Do not allow small children to reach inside the drawers or shelves without your supervision.
P.18 RTA-739DL TECHNI MOBILI WARRANTY DESKS/LAPTOP CARTS/FILE CABINETS: LIMITED 5-YEAR WARRANTY RTA Products, LLC warrants to the Original Purchaser who acquired a new product from RTA Products or its authorized resellers that this product will be free from defects in its workmanship and materials, under normal use and service conditions, as described herein. "Defects" as used in this warranty, is defined as any imperfections that impair the use of the furniture or product.
Your satisfaction is very important to us. Our Support agents can help you with any issues you may have, please feel free to contact us with any questions you have about our products, or to request replacement parts. FOR ADDITIONAL INFORMATION PLUS HELP OPTIONS VISIT: WWW.TECHNIMOBILI.COM CLICK ON SUPPORT TAB Or scan the following QR Code: EMAIL US: support@rtaproducts.