Instructions

ManualsBrandsTechnaxx ManualsAudioTechnaxx Musicman BT-X49 True Wireless (2963091) In-ear headphones In-ear Headset, Noise cancelling, Touch control Blac

MusicMan

* User Manual

Mini TWS Bluetooth In-Ear Headphone BT-X49

With this comfortable and good fitting In-Ear stereo headphone

you can enjoy music via Bluetooth

The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares that this

device, to which this user manual belongs, complies with the essential requirements

of the standards referred to the Directive RED 2014/53/EU. The Declaration of

Conformity you find here: www.technaxx.de/ (in bar at the bottom

“Konformitätserklärung”). Before using the device the first time, read the user

manual carefully.

This device has a rechargeable battery. It must be fully charged before first

use. NOTE: Charge the battery of the device every 2–3 month if it is not used!

Turn OFF nearby Bluetooth devices to avoid signal interference! WARNING:

DO NOT TURN THE VOLUME TOO HIGH – HEARING LOSS MIGHT BE THE

RESULT!

Service phone No. for technical support: 01805 012643 (14 cent/minute from

German fixed-line and 42 cent/minute from mobile networks).

Free Email: support@technaxx.de

Keep this user manual for future reference or product sharing carefully. Do the same

with the original accessories for this product. In case of warranty, please contact the

dealer or the store where you bought this product. Warranty 2 years

Warning! Choking hazard. Small parts.

Features

 Mini True Wireless Stereo (TWS) In-Ear headphone for maximum

movement

 Music transfer & handsfree function via Bluetooth V4.2

 Pairing with Bluetooth-enabled audio devices, Smartphones,

Tablets, etc.

 Built-in microphones in both In-Ear headphones

 Noise & Echo reduction by wireless In-Ear design

 Function button on both In-Ear headphones (Play/Pause/On/OFF)

 Telephone calls (on main headphone), redial & answering

 Soft & tight ear hooks for comfortable fit

 Ideal for sport activities

Summary of content (9 pages)

PAGE 1
MusicMan® * User Manual Mini TWS Bluetooth In-Ear Headphone BT-X49 With this comfortable and good fitting In-Ear stereo headphone you can enjoy music via Bluetooth The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares that this device, to which this user manual belongs, complies with the essential requirements of the standards referred to the Directive RED 2014/53/EU. The Declaration of Conformity you find here: www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”).
PAGE 2
-in-1 handy case for charging & storage Charging directly in the charging box charging box can charge ~3x the In-Ear headphones, before you have to fully charge the charging box again. Technical specifications BT version 4.2 / EDR, A2DP 1.3, AVRCP 1.6, HSP 1.2, HFP 1.6, TWS Loudspeakers Frequency range 20Hz~20kHz Transmitting distance ~10m (open space) Bluetooth Frequency band 2.4GHz Radiated transmission power max. 2.5mW Built-in rechargeable 50mAh lithium polymer Power In-Ear piece (each) battery 3.
PAGE 3
Product overview Charging & Storage Box with In-Ear Headphones Front 1 Multi-function button (Answer, Hang up, Play, Pause, On, Off) 2 Microphone Battery control (charging box) 5 Battery status 6 Charging contact (headphones) Micro USB connector Back 3 Charging contact (charging box) 4 First use Connect charging box with the MicroUSB cable and a USB power adapter* (*not included in the delivery). Only remove the charging cable when all 4 BLUE LEDs are shining and the two RED LEDs turned off.
PAGE 4
Press and hold the multi-function button of both (!) headphones simultaneously for 7 seconds until the BLUE and RED LED flash alternately. Now the headphones are paired and connected automatically. You hear the announcement "connected, left channel, right channel, get into paring mode". Then plug in the headphones in correct way into your ears. Now open the Bluetooth settings on your Bluetooth device and select the „MusicMan BT-X49“ from the list.
PAGE 5
Attention: The headphone fits only in one direction perfectly when put on! So be sure the right side is on the right and the left on the left! How to switch on or off the headphone SWITCH ON: when BT-X49 is in off state, press and hold the multi-function button for 3 seconds until the BLUE LED flashes once with prompt of “power on”. SWITCH OFF: when BT-X49 is in on state, press and hold the multi-function button for 3 seconds until the RED LED flashes once with prompt of “power off”.
PAGE 6
The headphone must be powered off before you begin to initiate the paring. Press and hold the multi-function button for 3 seconds until the BLUE and RED LED flash alternatively. The headphone is now in paring mode. Note: always the main headphone is the one which is paired to your mobile phone and has the right hand channel. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. Check the user guide of your phone for instructions.
PAGE 7
How to use device functions Make a call: to make a call, use your phone in the normal way when the headphone is connected to your phone. The sound will be transmitted to the headphone automatically. Answer a call: when there is incoming call, press the multi-function button of the headphone, or use the phone keys to answer the call. End a call: after finishing the call, press the multi-function button of the headphone, or use the phone keys to end the call.
PAGE 8
Hints for TWS Pairing TWS pairing is a technical term of using the Bluetooth product. Make two Bluetooth enable devices to be in wireless connection. It will be automatically distinguished between left channel and right channel headphones. The main headphone is to be paired with Bluetooth mobile phone. After TWS connecting, you can play/pause music through both headphones, but only main headphone has call function.
PAGE 9
Warnings Only charge the BT-X49 charging box through the DC 5V Micro USB port by using the provided Micro USB charging cable. You also can use an USB charging adapter but ONLY (!) up to DC 5V/1A. Do not (!) charge the BT-X49 with more power! If the BT-X49 fails to link to your mobile device or if it fails to play music after being connected, the user shall check if your mobile device supports A2DP. Do not disassemble the BT-X49, it may result in short-circuit or damage.