TechFaith PEAN User Manual Version 1.
Please Read Before Proceeding Microsoft, MS-DOS, Windows, Windows NT, Windows Server, Windows Mobile, ActiveSync, Excel, Internet Explorer, MSN, Outlook, PowerPoint, and Word are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. THIS DEVICE IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING.
SAR INFORMATION The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types Pean (FCC ID: UJQ-06378T) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.491 W/kg and when properly worn on the body is 0.724 W/kg. This device was tested for typical body-worn operations with the back of the handset kept 1.5cm from the body.
TECHFAITH..................................................... 1 FUNCTIONS DURING A CALL .................................41 RING TONE SETTINGS .........................................42 PHONE SERVICES ..............................................43 NETWORKS ......................................................43 PEAN............................................................... 1 CHAPTER 4...................................................44 USER MANUAL VERSION 1.0 .....................
FIND A CONTACT ............................................... 88 SEND A MESSAGE TO A CONTACT .......................... 89 REMOVE A PICTURE FROM CONTACT INFORMATION ............................................... 94 CREATE A SIM CONTACT .............................. 94 FIND A CONTACT ONLINE .............................. 95 SEND CONTACT INFORMATION ...................... 96 CHAPTER 9 MULTIMEDIA EXPERIENCES.......... 98 GAMES ........................................................... 98 BUBBLE BREAKER....
Chapter 1 Getting started 1.1 Getting to know your device & accessories 1.2 Installing the SIM Card 1.3 Battery Information 1.
1.
14 12 21 13 18 17 15 1 2 3 4 5 6 7 8 11 9 10 19 20 16 8
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Item Volume controller Camera key Function left key Talk key Start menu key Function right key End key Back/Delete key Enter key Navigation keys Microphone Power/Backlight Custom key/Notification LED Receiver Earphone jack Mini-SD card slot Speaker Flash light Camera Lens Cover Latch Stylus Function Instruction Press to adjust the volume of the phone and the receiver. Press to launch Camera.
This user manual is published by TECHFAITH. TECHFAITH reserves the right to correct the typos or description errors, modify the contents on function improvement and technical update in this manual at any time. We feel sorry that the contents of this manual are subject to change without prior notice. Accessories The following accessories are provided with the device: 1 2 3 No.
1 2 3 AC adapter USB cable Stereo-wired earphone, with volume control jog, and Send/End button Connect it to a power supply to recharge the battery. Connect it to a PC to synchronize data. Listen to audio media, or answer/reject/end a phone call. Speak to it to create a voice note.
1 Press the cover latch and slide down to remove the back cover. 2 Find the gap between the battery and the casing at the bottom. Stick it upward to lift the bottom end. 3 Insert the SIM card into the SIM card slot with its gold contacts facing down. Its cut-off corner should match the cut-off corner in the slot. Push down lightly and forward to snap it into place. 4 Replace the battery and gently push down to snap it into place.
this device. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made. Use the battery only for its intended purpose.
• • • • Do not crush, puncture, short external contacts, or dispose of in fire or water. Do not expose to temperatures above 45˚C (125˚F). Replace only with the battery pack designated for this product. Recycle or dispose of used battery as stipulated by local regulation. Charging the battery New batteries are shipped partially charged. Before you can use your device, you need to install and charge the battery. Some batteries perform best after several full charge/discharge cycles.
Optimizing the power performance How long your battery power lasts depends on battery type and how you use your device. Try the following to help preserve battery life: • Tap > Settings > System tab > Power. On the Advanced tab, you can specify when your device turns off to conserve battery power. For optimum conservation, specify 3 minutes or less.
Dealing with low battery In case that the battery is running out, you are supposed to: • Charge the battery using the AC adapter, especially when you are using a Mini-SD card, modem, or other peripherals. • Save all unsaved data if necessary • Power off your device Starting up Turning on/off the device Press and hold Power key to turn it on. First time you do this, you are asked to complete a calibration process. For more information, see Section Calibrate the device.
Calibrating the device To complete a calibration process: • Following the cross as it moves about, tap the center of it when it holds and is still. The calibration process helps you tap an item more precisely with the stylus.
• • • To access the Today screen from anywhere, tap Start > Today. To personalize your Today screen, see “Personalizing your Pocket PC Phone” in Chap.5 Soft key bar Perform the function indicated on top of it.
Unread message The max signal strength Phone is turned off The battery is full charged Battery power is very low Battery power is used up.
Start Menu On Today screen, press Home or tap Start to draw out Start Menu. Some common programs are listed on it. To start a program on Start Menu: • Using Navigation up/down to scroll to a program, and then press OK • Tap a program with the stylus.
Chapter 2 Entering text & Searching information 1.1 Starting up 1.2 PC Requirement to Run ActiveSync 1.3 Specifications 1.
Introduction: Input Panel When you start a program or select a field that requires text or numbers, Input Panel appears. Input Panel provides various input methods, including Block Recognizer, Keyboard, Letter Recognizer, Phone Pad, and Transcriber. By default, the Input Panel icon appears on the menu bar to indicate which input method is currently selected. Tap the arrow beside you can select other input methods.
Letter Recognizer With Letter Recognizer, you can write individual letters, numbers and punctuation, which are then converted into typed text. Using Letter Recognizer Tap the Selector arrow, and tap Letter Recognizer. The handwriting area is divided into three designated parts: ABC, abc, and 123(all dimmed) Write characters, numbers, symbols, and punctuation in separate area: • • • • Write in the ABC area to enter capital letters. Write in the abc area to enter lowercase letters.
Write characters, numbers, symbols, and punctuation in separate area: • Write in the abc area to enter lowercase letters. • Write in the 123 area to enter numbers. • Tap the box in the right corner labeled “@$*” to open table of symbols and punctuation. ☺ Note: Block Recognizer is available when text entry is possible ♫ Tip: For help with using Block Recognizer, tap “?” in the right corner to see demo.
Start Transcriber Because Transcriber works transparently in the background of programs that accept user input, you must have one of these programs open to use Transcriber. 1. Start a program such as Word Mobile. 2. Tap the Input Panel icon at the bottom center of the screen and tap the Input Selector arrow. 3. Tap Transcriber. The Transcriber introductory screen appears.
To edit text 1. In a program, draw a line across the text you want to edit. 2. After you lift the stylus from the screen, the line will disappear and the selected text will be highlighted. 3. Do either of the following: • Rewrite the text. • Use gestures to capitalize letters, insert a space, and so on. For information about using gestures, see “Transcriber Gestures” in this chapter.
Using gestures in Transcriber Use quick strokes of the stylus to edit your text. Do the Enter, Space, and Tab gestures while writing text to insert returns, spaces, or tabs. Do To Insert a paragraph return at the cursor. The horizontal portion of the gesture must be at least two times longer than the vertical portion. Insert a space at the cursor. The horizontal portion of the gesture must be at least two times longer than the vertical portion. Move the cursor one space back and erase any text.
Undo the last action. Do the gesture by drawing a line straight up and back down. Copy the selected text. Do the gesture by drawing a line from left to right and back. Cut the selected text. Do the gesture by drawing a line from right to left and back. Paste copied or cut text. Do the gesture by drawing a line from the lower left of the screen diagonally up toward the right and back down to the right. Insert a tab.
1. From a program, position the cursor where you want text to appear. 2. Use the stylus to write anywhere on the screen. The handwriting will be converted to text shortly after you lift the stylus from the screen. Optimize handwriting recognition for Transcriber If Transcriber does not recognize your handwriting as accurately or quickly as you'd like, there are some things you can do to optimize handwriting recognition.
Show or hide the Transcriber toolbar The Transcriber toolbar, which appears at the bottom of the screen when Transcriber is open, provides easy access to several tools, Enter, Space, and Backspace buttons, and Left and Right arrow buttons. • Tap From a program, tap the Transcriber icon at the bottom of the screen. To Open the Options dialog box, where you can set options such as writing direction, text entry, and shorthand.
Insert a paragraph return at the cursor. Move the cursor one space to the left. Move the cursor one space to the right. Move the cursor one space back and erase any text. Open the Transcriber Help. Drawing and Writing on the Screen Drawing on the Screen With your Pocket PC Phone, you can draw directly on the screen, or write on the screen and save notes in your own handwriting. To do this, you must set the input mode in Notes to Writing.
3. In the Default mode box, tap one of the following: • Writing if you want to draw or enter handwritten text in a note. • Typing if you want to create a typed note. 4. Tap OK. To write a note 1. Tap Start > Programs > Notes. 2. In the note list, tap New. 3. Write your text on the screen. 4. When finished, tap OK to return to the note list. ☺ Notes To select handwritten text, tap and hold next to the writing. As soon as dots appear, and before they form a complete circle, quickly drag across the writing.
Searching You can search for files and other items stored on your device in the My Documents folder or on a storage card. You can search by file name or by key words located in the item. For example, you can search E-mail messages, notes, appointments, contacts, and tasks as well as in online Help. To search for a file or an item 1 Tap Start > Program > Search. 2 In Search for, enter the file name, word, or other information you want.
Chapter 3 Using the phone features 1.1 Starting up 1.2 PC Requirement to Run ActiveSync 1.3 Specifications 1.
Using the phone You can use your pocket PC phone to make, receive calls, record call history and send SMS/MMS messages. You can also take notes during a call, dial directly from Contacts, and copy SIM contacts to phone. PIN Most SIM cards are preset with a PIN provided by your wireless service provider. 1 Under this circumstance, enter the preset PIN assigned by the wireless service provider. 2 Tap Enter Please see Secure the phone in Chap. 5 for more information.
Making Calls Making a voice call You can make a voice call from Phone, Contacts, Speed Dial, Call History, and SIM Manager. Making a call from the Today screen 1 When on the Today screen, tap LSK (Phone), or press the Talk key to enter the phone screen. 2 On the phone screen, tap the number buttons to enter the number you desire, and then tap the Talk button to call the number. ♫ Tip: If you want to delete a number, tap ← to delete all numbers, press ←, and hold.
To call your voice mailbox, tap and hold Num 1 on the phone screen. Calling a recently dialed number When on the phone screen, press the Talk key and you see the last call. Tap Talk button to call it, or tap Call History to view other recently dialed calls. Scroll to one, tap Call or press Talk key to call. ♫ Tip: you can also tap the icon (Phone with a green arrow) before the number to call it. Making a call from Call History Tap Call History from the phone screen.
Answering another call at Call Waiting If you are already in a phone conversation when another call comes in, a Call Waiting screen will appear. You have to shelve the formal on hold to answer the latter. Tap LSK (Answer) or the Talk key to shelve the first call on hold and answer the second. If you prefer to ending the first call before answering the incoming call, first press Power, and then tap LSK (Answer) or Talk key to answer it. To reject the latter, just press Power or tap RSK (Ignore).
You need to create some speed dial entries here. To create a speed dial entry, see Chap. Adding a speed dial entry. Back to speed dial list, you will see the entries you created. To call a speed dial: • On the phone screen, tap and hold a number button until the call is launched. • If it is a 2-digit speed dial, tap the tens digit, then tap and hold the other until the call is launched. Functions during a call Many of the functions you can use during a call are network services.
Conference call Please refer to Sitting a call conference for details Additional Dialing information Making an emergency call You can make an emergency call under any circumstances, even if you have your SIM card or phone locked. Enter the emergency number that is available for your locale, and press the Talk key. Additional emergency numbers may be included in your SIM card. Contact your service provider for details Making an international call Tap and hold Num 0 until a + sign appears.
In Keypad, you can select Long/Short/Off tone when you tap and hold the buttons on the phone keypad. Phone services Here lists several services that help you handle incoming calls as you wish. Focus on a service type then tap the Get Settings button to retrieve settings from network; you can also change them here. Networks You can view available wireless networks, assign another network to connect if the current one turns available. In addition, you can choose to manually/automatically the network.
Chapter 4 Active sync 4.1 Synchronizing your phone 4.2 Using ActiveSync 4.
Synchronizing your phone Using ActiveSync Maintaining a steady connection between your Phone and your desktop or notebook PC is essential. This process of sharing information is called "synchronization." Active-Sync synchronizes information stored on your Phone from your PC or Microsoft Exchange Server.* It also allows you to share files between your Phone and your PC.
Installing ActiveSync Before synchronization can begin, you must install Active-Sync 3.7 or above on your desktop or notebook PC. Use the Companion CD that came with your device, or install ActiveSync free by downloading the software from Microsoft's web site at http://www.microsoft.com/windowsmobile. ActiveSync is already installed on your phone.
Before synchronizing information with a server, make sure all the requested server authentication information such as username, password, and the name of the Microsoft Mobile Information Server are correct. In the New Partnership wizard, tap Synchronize with Microsoft Mobile Information Server and/or this PC, instead of Synchronize with this PC. To set up ActiveSync Server: 1. From the Today screen, press the Start, then tap ActiveSync from the list of programs. 2. Tap Menu, then Options. 3.
When you tap Inbox for synchronization in ActiveSync, E-mail messages are synchronized as part of the general synchronization process. During synchronization, the following events occur: • Messages are copied from the Outlook Inbox folder on your PC, or from Microsoft Exchange Server, to the Inbox folder on your phone. • By default, when synchronizing Inbox information with your PC or Microsoft Exchange Server, you receive only messages from the last 3 days and the first 500 bytes of each new message.
Synchronizing Tasks Task synchronization is automatically taped in ActiveSync. By default, all of your incomplete tasks are synchronized. Tasks created on your phone are copied to your desktop computer during synchronization, and vice versa. Similarly, tasks that are deleted from your phone are deleted from your desktop computer during synchronization, and vice versa. ☺ NOTE: Tasks can be synchronized only with your desktop computer; they cannot be synchronized with a server.
Chapter 5 Managing your pocket PC phone 5.1 Customizing the Today Screen 5.2 Customizing the Start Menu 5.3 Setting Date/Time/Alarm/Language/Region options 5.5 Other Helpful Settings 5.6 Removing Programs 5.7 Managing Memory 5.
Customizing the Today Screen Tap Start > Settings > Personal tab >Today • On the Appearance tab, select a theme you desire for the Today screen. Setting a picture as the background 1 Select the Use this picture as the background check box, tab Browse to view the picture files. 2 Tap the file name of the picture you choose. 3 Tap OK • On the Items tab, select the items you want to appear on the Today screen.
Customizing the Start Menu If you don’t want too many items there on your Start Menu, you can reduce them: Tap Start > Settings > Personal tab > Menus You can select/deselect items/programs in the combo box to let it appear on/disappear from the Start Menu. ♫ Note: Only 7 programs are allowed on the Start Menu.
Setting Alarm in Clock & Alarms 1 Tap the Alarms tab 2 Tap Description; use the Keyboard to define a clock type. 3 Tap the uppercase letters below to arrange the days on which you need the alarm. 4 Tap the time display at the end to set a time for this alarm. 5 Tap the bell icon to select the reminder mode: Sound, Flash light, Vibrate, etc. If you have the Play sound check box selected, tap the sound selection box beside to select an alarm ring you like.
programs to replace the ones rarely run. To reassign a button: Tap Buttons on the Personal tab and you see the names of buttons and their current assignments. Tap a button you want to reassign, and then in Assign a program selection box, select a program to this button. ♫ Note: There is an icon representing the original functions of a button. It helps you identify a button and restore its default at any time. Increasing/Decreasing text size 1 Tap Screen on the system tab, and then tap the Text Size tab.
Tap the Sounds & Notifications tab • On the Sounds tab, select the check box to enable sounds for events and programs, or choose a soft/loud sound for screen taps and hardware button presses. • On the Notifications tab, select one from the various events in the selection box, and then choose a sound for it. In the following check box, select the way you want this event to be notified (Some may be dimmed according to the event). ♫ Tip: Disabling sounds and flash light helps conserve battery power.
Here it shows you what Device ID is and what it is used for. Note that your Device ID should start with a letter and contains only letters from A to Z, numbers from 0 to 9, underscore, and hyphen. Why is Device name important? The device name is used to identify your device in following situations: • Synchronizing with PC • Connecting to a network • Restoring information from a backup Removing Programs You can only remove the addition programs you installed.
To ensure a good performance of your device, it’s necessary to maintain a sufficient memory. To see the memory available Tap Start > Settings > System tab > Memory You see on the main tab the details of Storage and Program Tap the Storage card tab to see the memory available on the storage card. Free up program memory Please see Help topics on “Free up program memory” for instructions.
versa. Changes you make to the information on one computer will not affect the information on the other computer. If you want to automatically update information on both your device and PC, synchronize the information instead. For more information about copying and synchronizing files, see ActiveSync Help on your PC. To copy files to a storage card 1. Push the storage card into the storage card slot until it clicks into place. The card is secure when it does not protrude from the base. 2.
1. From the program file list, tap Menu > Options. 2. With a storage card inserted in the device, in the Save to box, tap the appropriate storage card to automatically save new items on the storage card. 3. Tap OK. Note In the file or note list, a storage card symbol is displayed next to the names of files saved on a storage card. Protecting Your Device There are two kinds of security on your device.
3. On the Hint tab, enter a phrase that will help you remember your password, but doesn’t allow others to guess your password. The hint will be displayed after the wrong password is entered four times. 4. Tap OK. The next time the device is turned on, you will be prompted to enter your password. Notes Each time a wrong password is entered, the time the device takes to respond will get longer and longer until the device appears to be not responding.
Chapter 6 Getting connected 6.1 Connecting to the Internet 6.2 Using Wireless Manager 6.3 Bluetooth 6.4 Other Helpful Settings 6.5 Internet Explorer Mobile 6.
Connecting to the Internet Your device is equipped with powerful networking functions that enable you to connect to the Internet through a General Packet Radio Service (GPRS) or Universal Mobile Telecommunications System (UMTS) network. You can set up connections to the Internet or to a corporate network to browse the Internet, and exchange e-mail or instant messages. Your device has two groups of connection settings: My ISP (Internet Service Provider) and My Work Network.
• If you want to use the mobile phone network, select Cellular Line. • If you want to use GPRS, select Cellular Line (GPRS, 3G). 6. Tap Next. 7. Complete the connection wizard by entering the required information and tap Finish. ☺ Notes To view additional information for any screen, tap Help. To modify your connection settings, tap Manage existing connections on the Connections screen, and complete the connection wizard. To start browsing the Internet, tap Start > Programs > Internet Explorer.
☺ Note To start browsing the private network, tap Start > Programs > Internet Explorer. To reset or modify the network card settings on your device 1. Tap Start > Settings > Connections tab > Network Cards. 2. In the My network card connects to list, select the appropriate item: • If you want to connect to the Internet using your ISP, select The Internet. • If you want to connect to a private network, select Work. 3. In Tap an adapter to modify settings, tap the appropriate adapter.
and increase network security. To run Wireless LAN on your device, you need access to broadband Internet, and the necessary access point or router that emits WLAN signals. If you do not have access to broadband Internet, consult your ISP before you try to run this utility. However, the availability and range of your device’s WLAN signal depends on the number, infrastructure, and other objects through which the signal passes.
☺ Note: WLAN (Wi-Fi) is the default wireless channel setting for your device. However, GPRS starts by default if your device does not detect any Wi-Fi signal. To connect to a Wi-Fi network • Tap Start > File Explorer, find My Device, and then tap to enter the cetk folder. • Tap Wlanloader to run it. On the screen, tap the Load box to activate driver. Now, it starts searching networks.
Bluetooth Using Bluetooth Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about 10 meters without requiring a physical connection. You can even beam information to a device in a different room, as long as it is within range.
♫ Note By default, Bluetooth is turned off. If you turn it on, and then turn off your device, Bluetooth also turns off. When you turn on your device again, Bluetooth automatically turns on. • Discoverable. Bluetooth is turned on, and all other Bluetooth enabled devices within a range of 10 meters can detect your device. To make your device discoverable 1. On your device, tap Start > Settings > Connections tab > Bluetooth. 2.
5. Enter a passkey to establish a secure connection. The passkey must be between 1 and 16 characters. 6. Tap Next. 7. Enter the same passkey that is entered on the other device. You can, however, edit and enter a new name for the other device. 8. Tap Finish. To accept a Bluetooth partnership 1. Ensure that Bluetooth is turned on and in discoverable mode. 2. Tap OK when prompted to establish a partnership with the other device. 3.
1. Tap Start > Settings > Connections tab > Bluetooth. 2. Tap and hold the partnership on the Devices tab. 3. Tap Delete from the shortcut menu. Beam information using Bluetooth To beam information from your device 1. On the device, tap and hold an item to beam. The item can be an appointment in your calendar, a task, a contact card, or a file. 2. Tap Beam [type of item]. 3. Tap the device name to which you want to send the beam. The item is beamed to the device you selected.
1. On your device, tap Start > Settings > Connections tab > Connections. 2. Tap Add a new modem connection. 3. Enter a name for the connection. 4. In the Select a modem list, tap Bluetooth. 5. Tap Next. 6. If the device appears in the My Connections list, skip to step 11. 7. If the device does not appear in the My Connections list, tap New, and follow the remaining steps. 8. Select the device name from the list and tap Next. 9. Enter a passkey and tap Next. 10.
To start Internet Explorer Mobile • Tap Start > Internet Explorer. To choose a Home page 1. In Internet Explorer Mobile, tap Menu > Tools > Options > General tab. 2. Do one of the following: • To use the displayed page as your Home page, tap Use Current. • To use the default Home page, tap Use Default. Tip To go to your Home page, tap Menu > Home.
To change how Web pages fill the screen 1. In Internet Explorer Mobile, tap Menu > View. 2. Tap one of the following: • One Column. Arranges the content into one column that is as wide as the screen. This means that you will rarely have to scroll horizontally. • Default. Maintains a layout similar to what you see on a desktop computer, but it makes items smaller and arranges the content so that you can see most of it without having to scroll horizontally. • Desktop.
• To save the picture in My Pictures on your device, tap Yes. • To save the picture in another location, such as a storage card, tap Save As. To change cookies and security settings Internet Explorer Mobile supports the protocols used by Secure Sockets Layer (SSL). A connection that uses SSL helps you to send personal information more safely. Cookies are small files containing information about your identity and preferences so that a page can tailor information to your needs.
Connect to a Terminal Server 1. On your device, tap Start > Programs > Terminal Services Client. 2. Enter the server name. 3. You can also select a server name in Recent servers if you have recently connected to a server. 4. Select the Limit size of server desktop to fit on this screen check box if you want to use programs that have been specifically sized for use with your device. 5. Tap Connect.
Chapter 7 Messaging (SMS, Email and MMS) You can create, send, and receive E-mail and Messages here. In addition, you can check E-mail by connecting your phone to a mail server. Enter different types (Text Messages, Outlook E-mail, & MMS) to check messages. SMS service SMS service is provided by network provider, and is for short text message transfer. First time to send SMS, please check to ensure that SMS Centre number has been set up.
and capacity are displayed. • After you finish the text, press LSK (Send) to send it. Once it is sent successfully, it will be saved in a folder named Sent Items Viewing SMS On SMS list screen, focus on one item and press RSK to view the detail. Press LSK (Reply) to reply to the bearer. Press RSK (Menu) to do other operations. Outlook E-Mail It supports receiving/sending E-mail on your phone. In addition, you can synchronize Outlook E-mail on PC.
Creating and sending MMS (Multi-media message service) to your friends is much fun and easy. You can insert video/audio clips, music, pictures, photos, funny text in an MMS and sent it to your friends or relatives to enjoy. Creating and sending MMS • On MMS main screen, press LSK (New) to create a new MMS • ·At To, you can directly enter recipient’s number or tap Add recipient from Menu to add recipients from Contacts.
Reply Reply to all and Forward current message. Folders Switch to other folders (including Draft box, Outbox, Inbox, Sent Items, and deleted mail) Switch Accounts Switch amongst SMS, Email and MMS; Move Move current message into other folders. Mark as Read Mark current item as an unread one; Download Messages It is only available in Email.
All fail-to-be-sent messages are stored here. Inbox All received messages are stored here. Sent Items All successfully sent messages are stored here, if the auto-save function of MMS enabled, after an MMS is successfully sent, it will be saved into Sent Items immediately。 Deleted Items In this folder, all files that removed from other folders are disposed. If deleted from this folder, it will be cleared out permanently. Options To utilize mailing features better, you can set the parameters.
Account options Here you can respectively set SMS and MMS. The items in Settings includes: whether to use Unicode which help correct errors in displaying content of messages sent from this phone or, whether to require service center to deliver send report after its forwarding a message to a recipient. New account You can set up an Email account here in order to send/receive Email. This phone supports POP3/IMAP4.
• Options and settings, which help you, create a custom Pocket MSN experience. For example, you can block strangers or people whom you don’t want to see you online or send you messages. ☺Before you can use Pocket MSN Messenger, your phone must be connected to Internet. See Connecting to the internet in Chap. 6 for instructions on setting up your Internet connection. You need a Microsoft.NET Passport or Hotmail account to use MSN Messenger. • To obtain a Passport, go to http://www.passport.
To sign in or out • To sign in, tap anywhere on the MSN Messenger screen. Enter the e-mail address and password for your Passport or Hotmail account, and tap Sign In. Signing in may take several minutes, depending on your connection speed. • To sign out, tap Menu > Sign Out. Your status changes to Offline. To add or delete contacts • To add a contact, tap Menu > Add a Contact, and follow the instructions on the screen. • To delete a contact, tap and hold the contact's name, and tap Deleting Contact.
To check your own Messenger status • Tap and hold your own name at the top of the page. Your current status is indicated in the displayed list by a bullet point. To change your display name 1. Tap Menu > Options > Messenger tab. 2. Enter the name you want to display to others in MSN Messenger. To get more help about MSN Messenger • From within MSN Messenger, tap Start > Help.
Chapter 8 Contacts (Phone book) Overview of Contacts Contacts is your address book and information storage for the people and businesses you communicate with. Store phone numbers, e-mail addresses, home addresses, and any other information that relates to a contact, such as a birthday or an anniversary date. You can also add a picture to a contact. From the contact list, you can quickly communicate with people. Tap a contact in the list for a summary of contact information.
• • • Begin entering a name or phone number in the provided text box until the contact you want is displayed. To show all contacts again, tap the text box and clear the text, or tap the arrow to the right of the text box. Use the alphabetical index displayed at the top of the contact list. Filter the list by categories. In the contact list, tap Menu > Filter. Then, tap a category you've assigned to a contact. To show all contacts again, select All Contacts.
Tip To quickly add a contact's address to a new message, tap the To, Cc, or Bcc line, and tap Menu > Add Recipient. Tap the contact you want to send the message to and choose the address if necessary. Why use categories? Use categories to group related contacts, tasks, and appointments. For example, you can assign work-related contacts to the Business category and personal contacts to the Personal category.
Create a contact 1. Tap > Contacts. 2. Tap New and enter the contact information. 3. When finished, tap OK. Note If your contact list has been filtered by a category when you create a contact, that category is automatically assigned to the new contact. Tips If someone who isn't in your list of contacts calls you or sends you a message, you can create a contact from Call History, or from the message by tapping Menu > Save to Contacts.
2 Tap the contact. 3 Tap Menu > Edit and enter the changes. 4 When finished, tap OK. Tips To include a nickname, title, and more, for an existing contact in the contact list, tap the contact, tap Menu > Edit, and tap the Name arrow. If most of the contacts you create have phone numbers that begin with the same area code, in the contact list, tap Menu > Options and enter that area code in the Area code box. Work with the contact list There are several ways to use and customize the contact list.
• To see a list of contacts employed by a specific company, tap Menu > View By > Company. Then, tap the company name. Tip To display a greater number of contacts, tap Menu > Options, select the Show contact names only check box, and clear the Show alphabetical index check box. Create a contact from an existing one If you want to create multiple contacts that have similar contact information, you can save time by creating one contact and then copying it. 1. Tap > Contacts. 2.
Remove a picture from contact information 1 2 3 4 Tap > Contacts. Tap the contact. Tap Menu > Edit. Tap Menu > Remove Picture. Create a SIM contact Contacts can be created and stored on a subscriber identity module (SIM.) If you move the SIM to another device, your SIM contacts are moved as well. 1. 2. 3. Tap > Contacts. Tap Menu > New SIM Contact. Enter the contact's information and tap OK. Tip To save an existing contact to your SIM, open the contact and tap Menu > Save to SIM.
Find a contact online In addition to having contacts on your device, you can also access contact information from your organization's Global Address List (GAL). This enables you to quickly add a message recipient or meeting attendee from a GAL. Access to the GAL is available if your organization is running Microsoft Exchange Server 2003 SP2 and you have completed your first synchronization with Exchange Server. 1. 2. 3. 4. Synchronize with Exchange Server if you have never done so.
Send contact information Using a text message, you can quickly send someone information about a contact in your contacts list. 1. 2. 3. 4. 5. Tap > Contacts. Select the contact. Tap Menu > Send Contact > Text Message. Select the contact information that you want to send and then tap Done. In the new text message, enter the address of the person to whom you are sending the contact information and tap Send.
Chapter 9 Multimedia experiences Games Bubble Breaker Overview of Bubble Breaker Bubble Breaker is easy to learn, yet difficult to master. The objective is to align similar bubbles to form large blocks of bubbles before bursting them. The more bubbles you have in the block before they are burst, the greater number of points you will receive. Tap Start > Programs > Games, select Bubble Breaker To burst a bubble, the bubble must be connected to other similar bubbles on the playing board.
• • • • • Tap Game > Options, and select options from the following: Play Sounds. Turns on or off the game sounds. Confirm End Game. Displays a confirmation dialog at the end of a game. Guest Mode. Enables guests to play without affecting the statistics. Game Style. Changes the style for new games as follows: • Standard - the default play mode in which bubbles will not increase as you burst them.
Solitaire Play Solitaire • • • • • • • • To open Solitaire, tap > Programs > Games > Solitaire. To deal the cards, tap Menu > New Game. To display cards in the upper-left stack, tap the stack. To move a card to one of the stacks, drag the card. Build the row stacks in descending order, from King to two, alternating between red and black cards. In the row stacks, turn a card face-up by tapping it. You can move a King to an empty row stack. To undo a move, tap Menu > Undo.
In Vegas scoring, your ante is $52 to begin playing each game. • The object is to earn more than you wagered. • You earn $5 for each card moved to a suit stack. • There is no time penalty or bonus awarded. • If you select the Keep cumulative score option, you see a running total of your score from game to game. • When you play using the Draw One option, you can go through the deck only once. • When you play using the Draw Three option, you can go through the deck only three times.
Enter Pictures and videos, you can preview all pictures stored both on your phone and memory card. • Press LSK or tap certain pictures to view in full screen. Press RSK to open Menu and you can: Send——Send pictures to other recipients via MMS or E-mail. Beam——Transfer pictures to other devices via infrared.
Edit——Edit picture Properties——View picture properties like file name, size etc; Options——Set general options and slide show options 103
Chapter 10 Camera (Pending) Before using the built-in camera on your phone, please read this: • This camera is produced and assembled with superior, high precision technologies. However, there might be bright or dim dots or lines not easy to dispose. You should also pay attention that, when you Capture pictures in a place with a dim light, the amount of impurities (e.g. white lines, etc.) may increase as well.
Now you can press OK or tap LSK (Capture) to take a picture. The pictures you take will be saved automatically. Capturing a video To capture a video, you need to tap Menu > Mode > Video to change to video mode. Total length of a video depends on the memory capacity of your phone.
• Adjust：Adjust brightness, contrast and saturation of camera. • Album: Browse all your pictures and videos here; • Exit: Exit Camera.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Chapter 11 Windows Media You can use Windows Media Player® to play audio/video files on phone / memory card or on network. Audio/Video format supported Windows Media audio/video format: wma, wmv Moving Picture Experts Group (MPEG): MP3 Playing a file On Player main interface, press LSK to enter Windows Media whose default interface is its library. You can tap from different types of files in specified folders the file you want to play. Press Back to enter playing screen.
Main menu of Media Player Press RSK to open Menu. The Menu functions are described as follows: Library All media files are stored here. Play/Pause Start playing or pause the current file. Stop Stop playing Shuffle/Repeat Play at random or repeat playing a file in Play list. Full screen To play video files in full screen mode Options Help you set up the player Properties Show details of current playing files.
Enter Now Playing screen from player. It displays on a list the file playing now or about to play. Tapping menu now to use the following functions: Library： Display the library screen so that you can choose a file to play. Move up： Move the taped file up in the play list order. Move down： Move the taped file down in the play list order. Remove from Play list： Delete the taped file from the play list, but the file is still in the media library.
Update Library. You have to update Library to see the newly added files before you find out and play it. In Library, tap Update Media Library from Menu for system to auto search (See the figure below). Search result will be placed to relative library folders. Playing directly in Library You can directly tap and play files in library. Add files to play list Only added to play list on playing can the files in Media Library be played with Windows Media Player.
Here you can set display mode of time stamp and play mode. Show time as Set the time display format of file playing. Pause playback while using another programs If you do not use this function, the media player will continue playing when other programs are running (except the call function). If you enable this function, then the media player pauses playing when other programs are running.
“Never” represents playing video files only in windows mode. “Only when oversized” represents playing video files in full screen only when the resolution of files is larger than that of the screen. “Always” represents always playing video files in the full screen mode. Scale to fit window When the resolution of the video file is larger than that of the screen, you can play it by zooming out the video window.
Chapter 12 Using other applications Word Mobile Word Mobile is a streamlined version of Microsoft Word. Word documents created on your PC can be opened and edited on your device. You can also create and edit documents and templates in Word Mobile and save them as .doc, .rtf, .txt, and .dot files. You can have only one document open at a time. When you open a second document, the first one is saved and closed automatically.
• Document protection. Word Mobile does not support displaying files that have been protected in Word on the PC. The following features are partially supported in Word Mobile. • Picture bullets • Revision marks • Table styles • Underline styles. Underline styles not supported by Word Mobile are mapped to one of the four supported styles: regular, dotted, wavy, or thick/bold/wide. • Legacy Pocket Word files. You can open *.psw files in Word Mobile; however, if you edit a file, you will need to save it in *.
• Alignment. Horizontal, vertical, and wrap-text attributes remain the same, but vertical text appears horizontal. • Borders. Appear as a single line. • Cell patterns. Patterns applied to cells are removed. • Fonts and font sizes. Fonts not supported by your device are mapped to the closest font available. The original font is listed on your device. When the workbook is opened in Excel on your PC again, the data is displayed in the original font. • Number formats.
scales are turned off. • Worksheet features. The following features are not supported in Excel Mobile and are removed or modified when a workbook is opened on the device: hidden sheets are not hidden; VBA modules, macro sheets, and dialog sheets are removed and replaced with a place holder sheet; text boxes, drawing objects, pictures, lists, conditional formats, and controls are removed; pivot table data is converted to values.
To stop a slide show • In a PowerPoint Mobile presentation, tap > End Show. To navigate between slides You can advance to the next slide if a presentation is not set up as a timed slide show, return to the previous slide, or go to any slide out of sequence. 1. Tap Start > Programs > PowerPoint Mobile. 2. Open the presentation you want to view. 3. Tap > Next or Previous, or tap Go to Slide and tap the slide you want to view.
Calculator You can use Calculator to perform basic arithmetic operations such as addition, subtraction, multiplication, and division. 1. Tap > Programs > Calculator. 2. Use the Calculator buttons or Input Panel to enter numbers and perform calculations.
• • To display the number stored in memory, tap MR. To clear the memory, tap MC. Note When you store a number in memory, it replaces the one that is currently stored. Notes Notes helps you to quickly capture thoughts, questions, reminders, to-do lists, and meeting notes. You can create handwritten and typed notes, record voice notes, convert handwritten notes to text for easy readability, and send notes to others. Entering information in Notes There are several ways to enter information in a note.
• Typing if you want to create a typed note. 4. Tap OK. To create a note 1. Tap Start > Programs > Notes. 2. In the note list, tap New. 3. Tap the Input Selector arrow next to the Input Method icon on the menu bar, tap the input method you want, and enter your text. 4. If the Input Selector arrow is not displayed, tap the Input Method icon. 5. When finished, tap OK to return to the note list. To record a note You can create a stand-alone recording (voice note) or you can add a recording to a note. 1.
If you are recording in an open note, an icon will appear in the note. If you are creating a stand-alone recording, an icon will appear in the note list. ☺ Note To play a recording, tap the Recording icon in the open note, or tap the recording in the note list. Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). You can set reminders for your tasks and you can organize them using categories. Your tasks are displayed in a task list.
2. Tap the task you want to change the priority for. 3. Tap Edit and in the Priority box, tap a priority level. 4. Tap OK to return to the task list. ☺ Note All new tasks are assigned a Normal priority by default. To set a default reminder for all new tasks You can have a reminder automatically turned on for all new tasks you create. 1. Tap Start > Programs > Tasks. 2. Tap Menu > Options. 3. Select the Set reminders for new items check box. 4. Tap OK to return to the task list.
When your list of tasks is long, you can display a subset of the tasks or sort the list to quickly find a specific task. 1. Tap Start > Programs > Tasks. 2. In the task list, do one of the following: • Sort the list. Tap Menu > Sort by, and tap a sort option. • Filter the list by category. Tap Menu > Filter, and tap the category you want displayed. ♫ Tip To filter your tasks further, tap Menu > Filter > Active Tasks or Completed Tasks.
Calendar Use Calendar to schedule appointments, including meetings and other events. Your appointments for the day can be displayed on the Today screen. If you use Outlook on your PC, you can synchronize appointments between your device and PC. You can also set Calendar to remind you of appointments with a sound or flashing light, for example. You can look at your appointments in several different views (Day, Week, Month, Year, and Agenda).
2. Schedule a new appointment, or open an existing one and tap Edit. 3. Tap Attendees. 4. Tap the name of the contact you want to invite. 5. To invite each additional attendee, tap Add and tap the name. 6. Tap OK. 7. The meeting request will be sent to the attendees the next time you synchronize your device with your PC. ☺ Note When attendees accept your meeting request, the meeting is automatically added to their schedules. When their response is sent back to you, your calendar is updated as well.
applications, such as games and tools that are specifically designed for mobile devices. The Java gives you the flexibility of installing and managing additional J2ME applications from the Internet. To install MIDlets from the Internet 1. Locate the MIDlet/MIDlet suite while connected to the Internet. 2. Select the MIDlet/MIDlet suite to download. 3. Confirm to start downloading. 4. Run the file(s) to install. Note You can cancel the installation at any time.
NoteIf the My MIDlets folder does not exist in My Documents, you can create one with the same folder name. However, a folder named Storage Card automatically appears after you insert an storage card into your device. To install a MIDlet/MIDlet suite 1. Tap Start > Programs > Java > Menu > Install > Local Files to install the MIDlets currently saved on your phone. 2. Select the MIDlet/MIDlet suite from the list by using the NAVIGATION control. 3. Tap Install. 4. Tap OK to install. 5.
2. Tap Menu > Actions > Uninstall. 3. Tap OK to confirm. Note You cannot uninstall a single MIDlet from a MIDlet suite; you must uninstall the complete MIDlet suite. To configure MIDlet security You can adjust security settings for each MIDlet/MIDlet suite. 1. On the Java Apps screen, select a MIDlet by using the NAVIGATION control. 2. Tap Menu > Actions > Security. 3. Configure the security options, such as Local connection, Net access, Auto start.
Appendix Appendix A.1 Regulatory Notices A.2 PC Requirement to Run ActiveSync A.3 Specifications A.4 Additional Safety Information A.5 Common Problems and Solutions A.6.
Regulatory Notices Regulatory Agency IDs For regulatory identification purposes, your product is assigned a model number of PEAN. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your PEAN. The “x” portion of the above model number(s) could be any alphanumeric character (or blank) denoting external cosmetic changes. This product is intended for use with a certified Class 2 Limited Power Source, rated 5 Volts DC, maximum 2 Amp power supply unit.
• The product has been exposed to rain or water. • The product has been dropped or damaged. • There are noticeable signs of overheating. • The product does not operate normally when you follow the operating instructions. • Avoid hot areas The product should be placed away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. • Avoid wet areas Never use the product in a wet location.
• Cleaning Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning, but NEVER use water to clean the LCD screen. • Use the USB cable The phone is not designed for being connected to USB 1.0 type interfaces! Please, only use the supplied USB cable because this cable will not support the power supply function of USB 1.0 type interfaces.
ONLY WITH SPECIFIED BATTERIES. RECYCLE OR DISPOSE OF USED BATTERIES ACCORDING TO THE LOCAL REGULATIONS OR REFERENCE GUIDE SUPPLIED WITH YOUR PRODUCT. PC Requirement to Run ActiveSync 4.x To connect your device to the PC, you have to installed Microsoft® ActiveSync® program on your PC. ActiveSync 4.
• Microsoft® Windows® Server 2003 Service Pack 1 • Microsoft® Windows® Server 2003 IA64 Edition Service Pack 1 • Microsoft® Windows® Server 2003 x64 Edition Service Pack 1 • Microsoft® Windows® XP Professional Service Packs 1 and 2 • Microsoft® Windows® XP Home Service Packs 1 and 2 • Microsoft® Windows® XP Tablet PC Edition 2005 • Microsoft® Windows® XP Media Center Edition 2005 • Microsoft® Windows® XP Professional x64 Edition • Microsoft® Outlook® 98, Microsoft® Outlook® 2000 and Microsoft® Outlook® XP,
Operating System ■ Characteristic Type Dimensions Weight with battery ■ Processor ■ GSM/GPRS RF band GSM services GPRS functionality SIM function Antenna ■ Memory and storage Flash ROM RAM Extended Storage Microsoft Windows Mobile 5.0 Pocket PC Edition Bar type ~112（L）*56（W）*16.
■ Camera Pixel Auto Focus Macro Mode Picture Size Zoom Video Flash LED ■ Display Main LCD Sub LCD ■ Notification Indicator Notification style ■ Keyboard/ Button / Switch Power button Reset button Send and End phone buttons Left and right soft key buttons 2M-mega-piexel CMOS N/A N/A Max 1600X1200 Digital zoom Support still image and video capture N/A 2.
■ ■ ■ ■ ■ ■ Two application function buttons Side buttons 5-way navigation buttons QWERTY Keypad Battery Capacity Operation time Standby Talk time Charging time Language options available Default language Audio Hand free Stereo Blue Tooth earphone Ring tone Playback Video Personal assistant Calculator Calendar Alarm Windows Media Player Y Volume up, Volume down and Camera Right, Left, Up, Down and Action N/A Removable rechargeable Li-Ion battery, 1,100mAh 150 hours >= 4 hours <= 4hours simplified Chines
Internet Explorer Task Note PC Tools ■ Office Mobile Excel Mobile Word Mobile PowerPoint Mobile Outlook ■ Message SMS MMS SAT Support USSD phase 2 Pocket MSN ■ KVM ■ Interface Mini-USB connector SIM card slot Audio Jack Y Y Y ActiveSync4.2 Y Y Y Y support concatenated SMS 10 built in SMS templates Support multi- recipients Support JPEG/GIF89a/WBMP/GIF87 Support Section 6.4, Proactive SIM commands and procedures Support Class B/C/E Y Y JAVA MIDP 2.0/TCP/IP SOCKET USB1.
■ Device-to-Device Connectivity Bluetooth Bluetooth SIG version 1.2 compliant;Supported profiles: headset, hands-free, object push, serial port, dial-up network Wireless LAN IEEE 802.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. Precautions while taking with your phone Please ensure to keep a distance at least 2.5 cm from your phone to your body when you are using it.
your phone OFF immediately. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider, or call the customer service line to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
Your phone completely complies with the standard related to wireless irradiation enacted by the authority of the state and International Health Association. These limiting standards are parts of comprehensive rules and constitute public wireless irradiation permission standards These standards are developed and formed after a long-term intensive scientific research by independent scientific organizations such s ICNIRP (International Commission on Non-ionizing Radiation Protection).
contact the doctor as soon as possible. • Do not attempt to disassembly the phone or the other accessories. • The built-in battery in the phone can only be changed by a professional service engineer. If it is displaced with a battery of an error type, an explosion may arise. Be sure to handle the used battery according to the induction of the producer.
Common Problems and Solutions If you detect something abnormal while using your phone, please refer to the following problems and solutions. If problems persist, please contact the dealer or service operator. Common Reasons problems Fail to connect to network using Inter net Explorer Solutions Network service operator does not Please consult network operator for provide such service, or you have not information about how to subscribe a subscribed it. service. Incorrect configuration of I.
Using your phone in places that may result in a poor signal of your phone, Poor signals such like surroundings of high buildings, or in a basement where radio waves Receive calls in places where a good signal is available. become unreachable. Using phone during the period of busy Avoid being within such a situation or communication, which may results in a similar. channel jam and inability of communicating. Fail to power on Using a over low battery. Charge it, or replace it with a new one.
Maintenance Guide If you have problems in using this phone, please contact the dealer or refer to the Repair Center specified. If your phone needs to be repaired, you may send it to the local maintenance spot (see the certificate of three guarantees equipped with the phone for specific repair network); if there is no local maintenance spot, please deliver your phone and copy of purchasing invoice to the dealer for mailing of EMS.
A.
Caller ID 78 Call barring 78 Call forwarding 78 Call waiting 78 Camera 192 Capture formats 143 Capture modes 143 Change MMS settings 129 Charging Battery 17 Composing MMS messages 125 Composing MMS messages from Templates 126 Conference call 59 Configuring MIDlet Security 177 Configuring MMS message settings 129 Connection 193 Connect to Internet 90 Connect to private network 91 Connect to Terminal Server 115 Contacts 135 Contacts search 43 Controls & Lights 193 Cookies, Security Settings (Internet Explorer
Copy pictures from a PC 155 Customizing the Start menu 71 D Deleting pictures & videos 157 Desktop player 160 Digital Rights Management 164 Display 192 Drawing and Writing on the Screen 40 E E-mail and Text Messages 118 E-mail search 43 Editing pictures & videos 157 Excel Mobile 170 Exchange Server 65 Expansion Slots 193 Appendix | 195 F Favorites, transfering from PC 93 Favorites (Internet Explorer) 93 Flight mode 47 G GSM/GPRS Module 192 H 153
Handwriting 40 Help search 43 History list (Internet Explorer 94 Home page (Internet Explorer) 93 I Images, showing on Web pages 94 Indicators 21 Infrared (IR) 66 Input mode 40 Input Panel 28 Input Selector 30 Inserting audio 128 Inserting photo & video 127 Installing ActiveSync 63 Installing MIDlets from a PC 174 Installing MIDlets from the Internet 174 Installing SIM Card 15 Internet Explorer Mobile 93 Introduction 28 K Keypad tone 77 L Launching camera 157 154
Letter Recognizer 31 Library screen 162 Licensed media 164 M Mail search 43 Main camera zoom range 148 Managing Memory 81 Managing MIDlets/MIDlet suites 176 Managing ZIP files 181 Media synchronization settings 67 MSN Messenger 131 N Network settings 78 Notes 139 Notes search 43 Now Playing screen 162 O On-Screen Keyboard 30 Opening .
Personal and system settings 73 Phone settings 77 Physical 193 Pictures, on Web pages 94 196 | Appendix PIN 46, 84 Playback screen 162 Playing videos 156 Play media 164 Pocket PC player 160 PowerPoint Mobile 172 Protected files 164 Protecting Your Device 84 R Recording a Note 42 Regulatory Notices 186 Replying to MMS messages 129 Resetting Your Pocket PC Phone 86 Ring tone 77 Ring type 77 Running GPRS Monitor 111 S Safety Information 188 156
Searching 43 Second camera zoom range 150 Security Settings (Internet Explorer) 95 Sending pictures & videos 158 Setting advanced options 127 Setting Date / Time / Language /Regional Options 71 Setting pictures as Today Backgrounds 158 Setting up MMS account 124 Smart Dialing 56 Sorting pictures & videos 157 Specifications 192 Starting Up 18 Starting ZIP 179 Start Phone Pad 36 Start WLAN Manager 107 Storage card 67 Synchronizing Information 63 Synchronizing music, video, and pictures 67 Synchronizing via In
and Bluetooth 66 Synchronizing with Exchange Server 65 Sync Setup Wizard 63 System Information 192 T Tasks 137 Tasks search 43 Temporary Internet files, deleting (Internet Explorer) 95 Text size, Web pages 94 Today Screen 20 Today screen settings 70 Transcriber 32 Troubleshooting Windows Media Player 166 Type text 30 U Uninstalling MIDlets/MIDlet suites 176 Use main camera 142 Use MMS Video capture mode 147 Use Multi-Tap input mode 38 Use Numeric input mode 38 158
Use Phone Pad Options screen 38 Use second camera 143 Use shortcuts 144 Appendix | 197 Use Still Image capture modes 146 Use T9 Input mode 37 Use the Review screen 148 Use the Tools menu 151 Use Video capture mode 147 Use zooming 148 Using ActiveSync 62 Using Bluetooth 96 Using Camera and Camcorder 142 Using GPRS Monitor 109 Using MIDlet Manager 174 Using MMS Messages 124 Using Pictures & Videos 155 Using Start Menu 25 Using Terminal Services Client 115 Using the Camera Settings screen 150 Using Wireless LA
V Video Call 51 Viewing Archive List Screen 179 Viewing MMS messages 129 Viewing pictures 156 Viewing slideshows 156 W Web browsing (Internet Explorer) 93 Web pages, layout 94 Web pages, showing pictures on 94 Web pages, text size 94 Windows Media Player 67, 160 Windows Media Player accessibility 166 Windows Media Player menus 162 160
