User's Manual

ManualsBrandsTECHCity Technology ManualsElectronicsCURTAIN CONTROLLER

Product Name: Contact Driving Controller

Model No. : LC-330C

P/N: LC-330C_20130109

Specification:

z RF : 433.92 MHz

z Power: AC - 110V ~ 240V

z AC Max. Power loading: 2A (~1/4HP)

z Use

remote to set ID & position.

AC Mode

Contact Mode

Application:

Integrate various motor curtain, gas valve,

door, lock…, etc. with control system.

Features:

z Touch, RF Remote, Power Control 3 in 1 design.

z RF wireless receive function

z Induction touch control: Open(Up), Stop, Close(Down)

z Detachable Panel, self-expression under paper design.

z Control Output ( Alternative )

- AC 100V～240V, forward/reverse control

- DO dry contact output x 2 suites

z Programmable route for power saving.

z Installation: Standard European in-wall gang box

Note! Please make sure the control mode of your equipment

before installation to avoid from burning down CS-330C or

your equipment.

Summary of content (4 pages)

PAGE 1
Product Name: Contact Driving Controller Model No. : LC-330C P/N: LC-330C_20130109 AC Mode Features: z Touch, RF Remote, Power Control 3 in 1 design. z RF wireless receive function z Induction touch control: Open(Up), Stop, Close(Down) z Detachable Panel, self-expression under paper design. z Control Output ( Alternative ) - AC 100V～240V, forward/reverse control - DO dry contact output x 2 suites z Programmable route for power saving.
PAGE 2
Setting A. Set ID & Position 1. You may use any remote controller of to input (set) ID & position to LC-330C 2. Use haptor to remove the panel. (Please check appendix for the details) 3. Use setup stick to push & let go SET button, buzzer Bi a sound, LED indicator blink 3 times & turn off. Now it’s under learning mode 4. Pick up a remote controller, press a NO. key then press ON. (ex. Press Zone 1, No.1 & ON) 5.
PAGE 3
Operation 1. Forward/Reverse: Touch [Forward]/[Reverse] the relay will close according the time you’ve set. 2. Press [Forward]; while the relay is still closing, touch [STOP] or [Reverse], relay will open. 3. Press [Reverse]; while the relay is still closing, touch [STOP] or [Forward], relay will open. 4. Follow [2.] & [3.], touch [Forward] or [Reverse], LC-330C will restart route counting till the action is interrupted or the time is up & the relay is recovered to the open mode. 5.
PAGE 4
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.