Specification Sheet

Rigid Standoff
700MO2S ________ ________
ORDERING INFORMATION
TWO-CIRCUIT MONORAIL
mo2_rigid_standoff_spec.pdf
FIXTURE TYPE: _________________________________________
JOB NAME: _____________________________________________
DESCRIPTION
The field-cuttable rigid standoff is recommended for curvy
runs or runs with heavier elements, such as glass pendants.
Rigid standoffs are compatible with various power feed
options: Use the chart below to determine the appropriate
standoff for your run.
Use standoff supports every three feet of Two-Circuit
MonoRail run and at corners. Standoffs can be positioned
to cover points where rails are joined.
FINISH
Antique bronze, chrome, satin nickel.
WEIGHT
0.25-2.55 lb./0.11-1.16 kg. ±
700MO2S LENGTH (A) FINISH
02 2" (1.9") Z ANTIQUE BRONZE
03 3" (3.6") C CHROME
06 6" (5.8") S SATIN NICKEL
12 12"
24 24"
36 36"
48 48"
96 96"
COMPATIBLE STANDOFF
LENGTH USED WITH
2" (1.9)* - Remote transformer with any canopy
3" (3.6)* - Canopy with 3" power extender
6" (5.8)* - Surface transformer 300w
- Surface transformer 500w
- Canopy with 6" power extender
12"* - Canopy or surface transformer with 12" power extender
24"* - Canopy or surface transformer with 24" power extender
36"* - Canopy or surface transformer with 36" power extender
48"* - Canopy or surface transformer with 48" power extender
96"* - Canopy or surface transformer with 96" power extender
*Actual length from ceiling to top of rail.
A
.7”
17 mm
1.1”
50 mm
Shown approximately 15% actual size.
7400 Linder Avenue T 847.410.4400
Skokie, Illinois 60077 F 847.410.4500
www.techlighting.com
© 2009 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C.
Tech Lighting reserves the right to change specifications for product improvements without notification.