Installation Guide

1.7

Installation Instructions for

Joshua 2" Canopy

700JS2C_

920JOSH2C

GENERAL PRODUCT INFORMATION:

This product is suitable for indoor dry locations only.

Install the 2" electrical box prior to these steps.

This product can be dimmed with a standard incandescent

dimmer.

Minimum volume of the electrical box must be 6 cubic

inches (98 cubic centimeter).

JOSHUA CEILING

#6 SCREWS

FRONT COVER

Remove the two #6 opposing screws from the front

cover of the 2" Electrical box.

Installing the Lamp

CAUTION: To reduce the risk of a burn or electric

shock during relamping, disconnect the power to

the fixture.

Use MAX 75 Watt, MR16 Front Cover Halogen

Lamp.

Push the MR16 lamp pins all the way into the socket

pins.

NOTE: Use only your fingers and a soft cloth to

replace the lamp.

SOCKET PIN

LAMP PIN

Installing the Fixture

NOTE: Use only your fingers and a soft cloth to

replace the lamp.

PAGE 1
920JOSH2C Installation Instructions for Joshua 2" Canopy 700JS2C_ 1.7 JOSHUA CEILING GENERAL PRODUCT INFORMATION: This product is suitable for indoor dry locations only. Install the 2" electrical box prior to these steps. This product can be dimmed with a standard incandescent dimmer. Minimum volume of the electrical box must be 6 cubic inches (98 cubic centimeter).
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS 2B 4 2 5 2" ELECTRICAL BOX To reduce the risk of fire, electrical shock, exposure to excessive UV radiation, or injury to person: 3 CEILING – Use this fixture indoors only. 6 – Do not look directly at the lighted lamp. FRONT COVER 8 – Do not remain in light if skin feels warm. DRESSING PLATE – Risk of fire: Use only the type of lamp and maximum wattage indicated in this instruction manual.