Installation Instructions

GP I :ENERAL RODUCT NFORMATION

This product is suitable for damp locations.

This product can be dimmed with a LED or TRIAC dimmer.

Consult lamp manufacturer for additional information.

Screw the lamp completely into the socket.

Installing the Lamp

SOCKET

LAMP

GLASS SHADE

Screw the three posts completely into the hub.

TOP VIEW

POST

HUB

CAP

Place the socket assembly into the glass shade then

place the cap on top of the glass shade.

Assemble the fixture

1.5

Refer to fixture marking for lamp information.

SOCKET ASSEMBLY

Pendant

Installation Instructions for

PAGE 1
Installation Instructions for Pendant 1.5 GENERAL PRODUCT INFORMATION: This product is suitable for damp locations. This product can be dimmed with a LED or TRIAC dimmer. Consult lamp manufacturer for additional information. Installing the Lamp Assemble the fixture 1A 2A 1 HUB POST TOP VIEW 1 1 SOCKET Screw the three posts completely into the hub. 2B CAP 2 LAMP SOCKET ASSEMBLY GLASS SHADE Refer to fixture marking for lamp information. 1 Screw the lamp completely into the socket.
PAGE 2
C CAP 3 SHADE TOP VIEW 3 Alighn the posts with the holes in the shade. Unscrew the threaded studs until they are completely through the shade. Replace the Lamp 3A SAVE THESE INSTRUCTIONS! SOCKET LAMP C AUTION: To reduce the risk of a burn or electric shock during re-lamping, disconnect the power to the fixture. Refer to fixture marking for lamp information. 1 While holing the shade, unscrew the old lamp out of the socket. 2 Screw the new lamp completely into the socket.