Generating a Bill of Materials For Low-Voltage
WHAT IS A BILL OF MATERIALS? A bill of materials is the list of product item numbers that are required to accurately price and supply a lighting system. Before you begin, you will need a rough plan of the lighting required for your project or a list of the pieces your client has requested. Process overview 1. Use the catalog to help you select the appropriate system, decorative elements, and options for your design. 2.
TABLE OF CONTENTS LED Illuminated Monorail pp. 4-7 LED Illuminated Wall Monorail pp. 8-11 Monorail pp. 12-15 2-Circuit Monorail pp. 16-19 Wall Monorail pp.
LED ILLUMINATED MONORAIL SYSTEM 4
LED ILLUMINATED MONORAIL SYSTEM Page numbers below reference the Full Line Catalog Step One: Choose your decorative elements Choose finish of system and make sure all components are specified as such. Choose elements (Pendants, Heads and Chandelier Heads) from decorative elements (pp. 6-11). Determine item numbers. Specify with an suffix. (pp. 68-173).
LED ILLUMINATED MONORAIL SYSTEM Page numbers below reference the Full Line Catalog Step Four: Choose your connectors Use a Straight Conductive Connector for joining multiple pieces of rail. Pair. (p. 21) Straight Isolating Connectors join sections of LED Illuminated Monorail and must be used when isolating one powered section from another. Typically they are used to separate 2x300 watt sections when using a 12 volt, 600 watt surface transformer or dual feed canopy.
LED ILLUMINATED MONORAIL SYSTEM SAMPLE BILL OF MATERIALS - As seen on pp.
LED ILLUMINATED WALL MONORAIL SYSTEM 8
LED ILLUMINATED WALL MONORAIL SYSTEM Page numbers below reference the Full Line Catalog Step One: Choose your decorative elements Choose finish of system and make sure all components are specified as such. Choose elements (Heads) from decorative elements (pp. 9-10). Determine item numbers (pp. 138-167). Specify one LED Illuminated Wall Monorail Element Adapter for each element (p. 29).
LED ILLUMINATED WALL MONORAIL SYSTEM Page numbers below reference the Full Line Catalog Step Four: Choose your connectors Use a Straight Conductive Connector for joining multiple pieces of LED Illuminated Monorail. Pair. (p. 21) Straight Isolating Connectors join sections of LED Illuminated Monorail and must be used when isolating one powered section from another. Typically they are used to separate 2x300 watt sections when using a 12 volt, 600 watt surface transformer or dual feed canopy.
LED ILLUMINATED WALL MONORAIL SYSTEM SAMPLE BILL OF MATERIALS Page numbers below reference the Full Line Catalog D F B G H C B A F E Item Quantity Item Number Description A 2 Mini-Dome I Swivel II Head 6", Amber, Satin Nickel B 2 LED Illuminated Monorail Element Adapter, Satin Nickel C 1 LED Illuminated Monorail, Satin Nickel - 9' Fiber Optic Cable D 1 Led Generator, Single Blue, Satin Nickel E 1 LED End Cap, Satin Nickel F 2 Direct Feed Standoff, Satin Nickel G 1 300w Re
MONORAIL SYSTEM 12
MONORAIL SYSTEM Page numbers below reference the Full Line Catalog Step One: Choose your decorative elements Choose finish of system and make sure all components are specified as such. Choose elements (Pendants, Heads and Chandelier Heads) from decorative elements (pp. 6-11). Determine item numbers. If using with a 24 volt transformer, specify at the end of each element item number (pp. 68-173). Add up total lamp wattage on system to confirm wattage does not exceed transformer capacity.
MONORAIL SYSTEM Page numbers below reference the Full Line Catalog Step Four: Choose your supports Recommended every 3'. Use Telescoping Rigid standoffs for curvy runs or if you want the ability to fine-tune the drop from the ceiling without any cutting. Add “-BJ” suffix for sloped ceiling mounting or add “-WB” for cantelievered wall mount (p. 42). Use Adjustable Cable Standoffs for a minimal appearance (p. 42).
MONORAIL SYSTEM Sample Bill of Materials - As seen on p. 142 of the Full Line Catalog Page numbers below reference the Full Line Catalog G F E H I A B C G A F B D C D D Item Quantity Item Number Description A 2 Vent Head 6", Satin Nickel B 2 Accessory, Frost, Satin Nickel C 2 12v 50w 38° MR16 Lamp D 3 Pendants, Opal, Xenon Lamp, Satin Nickel E 1 Monorail 48", Satin Nickel F 1 End Caps, Set of 4, Satin Nickel G 2 Telescoping Rigid Standoff, 2.
2-CIRCUIT MONORAIL SYSTEM 16
2-CIRCUIT MONORAIL SYSTEM Page numbers below reference the Full Line Catalog Step One: Choose your decorative elements Choose finish of system and make sure all components are specified as such. Choose elements (Pendants, Heads and Chandelier Heads) from decorative elements (pp. 6-11). Determine item numbers (pp. 68-173). Add up total lamp wattage on system to confirm wattage does not exceed transformer capacity.
2-CIRCUIT MONORAIL SYSTEM Page numbers below reference the Full Line Catalog Step Four: Choose your supports Recommended every 3'. Use Telescoping Rigid standoffs for curvy runs or if you want the ability to fine-tune the drop from the ceiling without any cutting. Add “-BJ” suffix for sloped ceiling mounting (p. 57). Use Adjustable Cable Standoffs for a minimal appearance (p. 57).
2-CIRCUIT MONORAIL SYSTEM SAMPLE BILL OF MATERIALS - As seen on p.
WALL MONORAIL SYSTEM 20
WALL MONORAIL SYSTEM Page numbers below reference the Full Line Catalog Step One: Choose your decorative elements Choose finish of system and make sure all components are specified as such. Choose elements (Heads) from decorative elements (pp. 9-10). Determine item numbers. If using with a 24 volt transformer, specify at the end of each element item number (pp. 138-169). Specify one Wall Monorail Rail Adapter for each element (not required for Display Lights).
WALL MONORAIL SYSTEM Page numbers below reference the Full Line Catalog Step Four: Choose your supports Recommended every 3' (p. 65). Step Five: Choose your transformer + canopy* Use a remote transformer and Wall Monorail direct feed canopy. Choose magnetic or electronic (p. 66-67). *If using LED heads or pendants, be sure to choose a transformer that is compatible with LED fixtures.
WALL MONORAIL SYSTEM SAMPLE BILL OF MATERIALS - As seen on p.
