User Manual

ManualsBrandsTech 21 ManualsGuitar EffectsFly Rig PL1 Paul Landers Signature - MULTI EFFECT PEDALBOARD FOR ELECTRIC GUITAR

POWER REQUIREMENTS

Utilizes included 9V DC, 100-240V universal auto-switching power

supply, 200mA, center negative.

Tech 21 Model #DC9.

NOTE: See page 3 for instructions how to change the prong

assembly.

For replacements, contact your local dealer/distributor, or Tech 21.

Maximum power consumption of the Fly Rig: approx 100mA.

ARNINGS:

* There are no user-serviceable parts inside. Attempting to repair unit is

not recommended and may void warranty.

* Missing or altered serial numbers automatically void warranty. For

your own protection: be sure serial number labels on the unit’s back

plate and exterior box are intact, and return your warranty

registration card or register online.

Note: This equipment has been tested and found to

comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radi-

ate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio commu-

nications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARRANTY:

ONE YEAR LIMITED. PROOF OF PURCHASE REQUIRED.

Manufacturer warrants unit to be free from defects in materials and

workmanship for one (1) year from date of purchase to the original

purchaser and is not transferable. This warranty does not include dam-

age resulting from accident, misuse, abuse, alteration, or incorrect cur-

rent or voltage. If unit becomes defective within warranty period, Tech

21 will repair or replace it free of charge. After expiration, Tech 21 will

repair defective unit for a fee.

REPAIRS:

ALL REPAIRS for residents of U.S. and Canada: Call Tech 21 for

Return Authorization Number. Manufacturer will not accept

packages without prior authorization, pre-paid freight (UPS preferred)

and proper insurance. International residents should contact our local

distributor, which can be found on the Support page of our website.

FOR PERSONAL ASSISTANCE & SERVICE:

Contact Tech 21 weekdays 10:00 AM to 5:00 PM, EST: 973-777-6996.

Hand-built in the U.S.A. using high-quality components

sourced domestically and around the globe.

T: 973-777-6996 • F: 973-777-9899

E: info@tech21nyc.com • www.tech21nyc.com

Summary of content (8 pages)

PAGE 1
POWER REQUIREMENTS Utilizes included 9V DC, 100-240V universal auto-switching power supply, 200mA, center negative. Tech 21 Model #DC9. NOTE: See page 3 for instructions how to change the prong assembly. For replacements, contact your local dealer/distributor, or Tech 21. Maximum power consumption of the Fly Rig: approx 100mA. WARNINGS: * There are no user-serviceable parts inside. Attempting to repair unit is not recommended and may void warranty.
PAGE 2
TECH 21, THE COMPANY APPLICATIONS Tech 21 was formed by a guitarist possessing the unusual combination of a trained ear and electronics expertise. In 1989, B. Andrew Barta made his invention commercially available to players and studios around the world. His highly-acclaimed SansAmp™ pioneered Tube Amplifier Emulation in professional applications for recording direct and performing live, and created an entirely new category of signal processing.
PAGE 3
UNIVERSAL POWER SUPPLY The included power supply is provided with a U.S. prong assembly installed. To change the prong assembly to one of the included European, UK or Australia/New Zealand styles, be sure the power supply is unplugged and follow these instructions: Press the PUSH switch to release the prong assembly. Slide the assembly up (about halfway) to align the side tabs of the prong assembly with the slots of the power supply housing. Then pull up to remove the assembly.
PAGE 4
SANSAMP FEUER DLA Section The SansAmp Feuer (Fire) section focuses on dirty amplifier tones. Delay with Tap Tempo + Vibrato + Ambiance The delay is voiced for the sounds of a vintage tape echo. DRIVE: Adjusts the overall amount of gain and overdrive, similar to when the output section of a tube amp is being pushed. TIME: Controls the amount of delay. This single, continuously-variable control provides a smooth sweep up to 750 milliseconds of delay time.
PAGE 5
OTHER GOODIES CHROMATIC TUNER The TAP/TUNER footswitch engages the chromatic tuner. Simply hold the footswitch down to engage the tuner, which will simultaneously mute the signal path. The LED in the tuner window will then light up. If the green light is on, you’re in tune. If you’re not, the red arrows serve as indicators: Arrow points up = Flat. Raise the pitch. Arrow points down = Sharp. Lower the pitch. As you get closer to being in tune, the arrow will blink faster and turn off when you are in tune.
PAGE 6
9 10
PAGE 7
11 12
PAGE 8
13 14