INSTRUCTION MANUAL 4V Max LI-ION CORDLESS SCREWDRIVER TDSC01P Operation /Safety Instruction TECCPO is committed to providing the best After-sale Service,we strive for your FIVE STAR satisfaction! support@teccpo.net / support@teccpotools.
Original Instructions Description of Symbols The rating plate on your tool may show symbols.These represent important information about the product or instructions on its use.
Li-Ion Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. Conforms to relevant legislation and safety standards. Li-Ion Li-ion battery cells are recyclable and should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for ecycling advice Specification Rated Voltage DC 4.
Product Features 6 7 1 2 4 3 5 8 9 10 12 11 1. Keyless Chuck 2. Torque Adjustment Ring 3. LED light 4. Forward/Reverse Switch 5. Trigger Switch 6. Spindle Lock Button 7. Soft Grip Handle 8. Charging socket 9. LED Display 10.Flashlight Button 11.Flashlight 12. Charger USB Cable Accessory: Bit holder x1 50mm Screwdriver Bits x6 Adapter x1 25mm Screwdriver bits x 28pcs Sockets x 8pcs General Safety WARNING: Read all safety warnings and all instructions.
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions.
measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
Using for the first time Charging the battery pack NOTICE! Risk of damage to the unit! Do not allow the battery pack to deep discharge. NOTICE! Risk of damage to the unit! Do not press the On/Off switch after the device has deactivated automatically Note: The Li-Ion battery pack can be charged at any time without affecting the lifetime of the unit. Interrupting the charging process will not damage the battery pack. • The battery pack must be charged prior to the first start-up 1.
Check to make sure the device is in a safe operating condition: – Check to make sure there are no visible defects. – Check to make sure all device components are correctly mounted. Switching on and off – To start the tool turning, press the Trigger Switch(5) • The LED (3) will light up. – To switch the unit off, release the Trigger Switch(5) Screwdriver action – Keep the device in a straight line to the screw. Note: Always use the screw bit designed for the screw.
Shenzhen Allsight E-business Co., Ltd Web:www.teccpotools.com Facebook:www.facebook.com/Teccpo.US E-mail:support@teccpotools.