TBS Unify Pro HV 5.8GHZ VTX

ManualsBrandsTeam BlackSheep ManualsElectronicsTBS 5.8GHz Unify Pro HV Video Transmitter (25mW-800mW) (RP-SMA)

TBS UNIFY PRO 5G8 (HV) Video Tx

High quality, license‐free, ultra‐tiny, race ready

Revision 2016-03-01

The TBS Unify is a new line of video transmitters, optimized for compatibility across

multiple “platforms” and reduced to a small form factor, completely redesigned

and tailored for FPV use. Perfect for small multi rotor platforms or in applications

where flight times are critical.

TBS UNIFY PRO 5G8 key features

• World’s lightest 40ch video transmitter line

• Extremely powerful - with integrated Heatsink

• 25mW* (up to 800mW with HAM license)

• One button frequency and power setup

• OSD configuration using TBS Smartaudio (PNP PRO OSD)

• RP-SMA connector with frame mounting holes integrated

• 5V input or 2-6S input with 5V output versions available

• Solder-on module dimensions available on request

Specifications

TBS UNIFY PRO 5G8

TBS UNIFY PRO 5G8 HV

Input voltage:

Regulated 5V

6V - 26V (2S - 6S), peak max 31V

Extra features:

SmartAudio V1.0

SmartAudio V2.0, CleanSwipe, PitMode

Output power:

13dBm (25mW), 23dBm (200mW*), 27dBm (500mW*), 29dBm (800mW*)

Channels:

24Ch, 5733MHz - 5866MHz and 40ch, 5658MHz - 5917MHz *

Power consumption

25mW: 250mA. 200mW: 320mA. 500mW: 460mA. 800mW: 600mA

Range:

Up to 4km with omnidirectional RHCP antennas

Antenna connector:

RP-SMA Female

Port connector:

JST-SH socket, 4 pin

JST-GH, 6pin

Dimensions:

17 (H) x 24 (W) x 4 (D) mm

22 (H) x 30 (W) x 4 (D) mm

Weight:

5g excluding antenna

7g excluding antenna

Kit contents:

1x TBS Unify 5G8, 1x 5V cable

1x TBS Unify 5G8 HV, 1x VTx/Cam cable

* requires HAM license, special unlocking procedure!

Summary of content (13 pages)

PAGE 1
TBS UNIFY PRO 5G8 (HV) Video Tx High quality, license‐free, ultra‐tiny, race ready Revision 2016-03-01 The TBS Unify is a new line of video transmitters, optimized for compatibility across multiple “platforms” and reduced to a small form factor, completely redesigned and tailored for FPV use. Perfect for small multi rotor platforms or in applications where flight times are critical.
PAGE 2
Table of Contents Button Menu LED Flash Codes for Channel, Band and Power Menu Table Frequency Table Video Transmitter Pinout TBS UNIFY PRO 5G8 TBS UNIFY PRO 5G8 HV Connection to DIY drone build Connection to TBS CORE products TBS CORE PRO Control Channel, Band and Power control Custom frequencies Technology Showcase PitMode CleanSwitch SmartAudio Declaration of Conformity FCC Information Good practices 2
PAGE 3
Button Menu There are categories in the menu, and settings. Pressing the button for 3 seconds will toggle between categories, pressing it for a short time toggles between settings. To enter the menu, hold the button for 3 seconds. LED colors will signal the state of the menu, for an overview see the table below. Channel select mode Enter menu by pressing the button for 3s. Red LED will flash 1x. Select channels. Band select mode Press button for an additional 3s. Red LED will flash 2x. Select band.
PAGE 4
Button Menu Diagram LED Flash Codes for Channel, Band and Power The TBS UNIFY PRO 5G8 signals Channel, Band and Power levels using a startup sequence of LED codes. The same sequence is also repeated in the menu to make it unified. First the red LED flashes to indicate the item being shown. One flash for channel, two flashes for band, three flashes for power level. Subsequently, the blue LED will indicate the value.
PAGE 5
Menu Table RED LED BLUE LED 1 2 3 4 5 6 7 8 6 7 8 1 Channel 1 2 3 4 5 2 Band A B E Airwave Race 3 Power Level* 25 200 500 800 Frequency Table Channel 1 2 3 4 5 6 7 8 Band A 5865 5845 5825 5805 5785 5765 5745 5725 MHz Band B 5733 5752 5771 5790 5809 5828 5847 5866 MHz Band E 5705 5685 5665 5645 5885 5905 5925 5945 MHz Airwave 5740 5760 5780 5800 5820 5840 5860 5880 MHz Race Band 5658 5695 5732 5769 5806 5843 5880 5917 MH
PAGE 6
Video Transmitter Pinout TBS UNIFY PRO 5G8 Despite being plug and play with the TBS CORE , TBS CORE PNP PRO , PNP25, PNP50 - the UNIFY PRO can also be directly soldered to cameras or custom power distribution boards. See the pinout below: TBS UNIFY PRO 5G8 HV The UNIFY PRO 5G8 HV comes with wires ready to be assembled into your own projects.
PAGE 7
TBS CORE PRO Control The TBS UNIFY PRO was built with the TBS CORE PRO in mind. Controlling your drone via the R/C joystick was a concept first introduced by the BrainFPV FC. TBS has extended this functionality to the entire PowerCube, allowing you to change not only the FC settings but also the video transmitter channels and output power. In order for the CORE PRO to detect the video transmitter, the CORE PRO must be equipped with Smart Audio technology.
PAGE 8
The video frequency does not change instantly. It will wait for you to exit the menu and then change to the new frequency as indicated in the last line. Custom frequencies The latest CORE PRO software unlocks something truly revolutionary. Finding empty channels - or ones that are not accidentally stomped upon - is nearly impossible with the big number of new FPV pilots storming into the hobby.
PAGE 9
Technology Showcase PitMode A new feature introduced with the TBS UNIFY PRO 5G8 HV is PitMode. It allows racers to power up their video transmitters during race events without interfering with other racers. PitMode can be entered either by pushing down the button while powering up your drone, or by enabling PitMode via OSD. There are 3 types of PitMode supported: ● In-Band PitMode: Range is limited to 2-3m, but transmission happens on the selected frequency.
PAGE 10
SmartAudio V2.0. The new version supports control for the new features (e.g. PitMode). SmartAudio is a single-wire UART protocol, running over the Audio wire. If you are a OSD or VTx developer interested in adding support for SmartAudio, please create a support ticket with us so we can supply you with the technical documentation: ● http://team-blacksheep.freshdesk.
PAGE 11
Declaration of Conformity FCC Information FCC Label Compliance Statement This device complies with ANSI C63.4 and Part 15 Subpart C Paragraph 15.249 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference received including interference that may cause undesired operation.
PAGE 12
Good practices We have compiled a list of all of practices which have been tried and tested in countless environments and situations by the TBS crew and other experienced FPV pilots. Follow these simple rules, even if rumors on the internet suggest otherwise, and you will have success in FPV. ● Start with the bare essentials and add equipment one step at a time, after each new equipment was added to proper range- and stress tests.
PAGE 13
● Try to achieve as much separation of the VTx and R/C receiver as possible to lower the RF noise floor and EMI interference. ● Do not buy the cheapest equipment unless it is proven to work reliably (e.g. parts falling off, multitudes of bug fix firmware updates, community hacks and mods are a good indicator of poor quality and something you do NOT want to buy for a safe system). Do due diligence and some research before sending your aircraft skyward. Manual designed by ivc.no, written by TBS.