Instruction Manual R-4int FM INTERNET Radio with Docking for iPod®
Safety Information 9. Do not defeat the safety purpose of the polarized or grounding - type plug. a polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
FCC Information FCC part 15.19 This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC part 15.21 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC part 15.
Safety Precautions To achieve the utmost in enjoyment and performance, and in order to become familiar with its features, please read this manual carefully before attempting to operate the unit, this will assure you years of faithful, trouble free performance and listening pleasure. Important Notes • This safety and operating instruction should be retained for future reference.
Safety Instructions Some Do’s And Don’ts On the Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment. Do ensure that the main plug shall remain readily operable.
Contents Safety Information 2 Safety Precautions 4 Safety Instructions 5 Package Content 2 Internet Radio Quick start Guide 3 What you need before you can use your Internet Radio ......................................................3 Controls Overview (a) .........................................................................................................4 Controls Overview (b) .........................................................................................................
Contents page
Package Content Main unit adapter Instruction Manual 2
Internet Radio Quick start Guide What you need before you can use your Internet Radio ☺ Thanks for your buying! Before you use it, you need to know followings: LAN Setting: • Make sure the internet environment is ready and the network settings is available for LAN (ADSL or Cable Modems is highly recommended). • To find the Radio’s LAN MAC address, Please follow: Main menu System settings Network View settings MAC Address Wireless LAN Setting: • A broadband Internet connection.
Controls Overview (a) Unit Front Overview Control Internet FM iPod mode Press to turn on/off Radio a. Press to convert among Internet, Music player, FM, iPod and AUX IN mode in turn. b. Press and hold to enter menu options. MODE/MENU BACK Press to return to previous menu page INFO Press to Display Queue information Press to decrease volume level Press to increase volume level a. Turn the knob to change options, press the knob to select b.
Controls Overview (b) Unit Top Overview Remote Control Overview 1 Standby/on button 11 ALARM 1, ALARM 2 button 2 MODE button 12 iPod mode, press to play/pause 3 iPod mode, press to repeat 4 MENU button 5 SNOOZE button 6 SLEEP button 14 iPod mode, press to shuffle 7 MEMORY button 15 MUTE button 8 INFO button 16 VOLUME button 9 PRESET button 1-10 17 Press to adjust TIMBRE 10 clock button 18 DIMMER button 13 Press or to scroll up or down iPod mode, Press or to previous or
Setup Wizard Step 1 - Power up Radio 1. Connect to your Internet Radio adapter and ensure the power LED is lighting up. In use, Radio can be switched on or off by press button. For initial use, it will ask you ‘Setup wizard’. Step 2 – Setup wizard 1. Continue above show, press SELECT to confirm ‘YES’, and then turn format’, press SELECT to confirm. 2. Turn to ‘Update from Network’, and then press SELECT to confirm. 3. Turn to your local ‘timezone’, and then press SELECT to confirm.
4. Turn 5. Turn 6. Turn to your prefer ‘Daylight saving’ status, and then press SELECT to confirm. to your local ‘Wlan region’, and then press SELECT to confirm. to your prefer ‘SSID’, press SELECT to confirm. Radio will save it in memory. Note: In some cases radio may find more than one network. Turn to your favorite one, press SELECT to confirm. 7. If your network is not configured to request a password (WEP/WPA), radio will connect to the network and display: 8.
Turn to cycle through the alpha-numeric character list, press SELECT to select an appointed character. Note: WEP/WPA pass codes are case-sensitive. If you make a mistake while entering your password, select ‘ ’ icon to delete a character. Note: a.> for , its full name is Backspace. b. > the method of select backward turn c.> Select , or icon is when cursor director to ‘ ’, to select in turn. will be returned to previous track. d.
Access wireless network 1. After successfully ‘setup wizard’, it will show you as below, . Or, in use, you can by press and hold MODE/MENU. 10. While cursor point to < Internet radio >, press SELECT. While cursor point to < Station list >, press SELECT to confirm. After trying to connect to network, if it say: Please follow: a. Check your router, see it working normally or not; b. Relocate your radio to a stronger signal position is necessary! c. Make sure your password is correct input.
Choosing a station After your radio has successfully connected to network, you are ready to select a station. 1. Turn to < Station list >, and then press SELECT to confirm. 2. Turn to < Stations >, and then press SELECT to confirm. 3. There are five options are available for you to choose a station as above photo show. Note: ‘LOCATION’ enables you to choose from the radio stations provided by any country which you choose from a list. a. While cursor point to < Location >, press SELECT to confirm. b.
a. Turn to < Genre >, press SELECT to confirm. b. Turn to your selecting type of content, press SELECT to confirm. c. Turn until the display shows the station you want, press SELECT to confirm. Note: a. Some radio stations do not broadcast 24 hours per day, and some stations are not always on-line. b. If this station has on-demand content, that is, it gives an option of listening the old programs which have already been broadcast.
Connecting to wired network Step 1 – Choose LAN Setting Note: a. make sure LAN cable connecting to LAN socket already. 1. Press and hold MODE/MENU to goes into ‘Main Menu’, and then turn >, press SELECT to confirm. 2. Turn to < Network >, press SELECT, and then turn to < System setup to < Manual settings >, press SELECT to confirm. 3. While cursor point to < Wired >, press SELECT to confirm, and then turn to < DHCP enable >, press SELECT to confirm.
Step 2 – Enter Internet Radio mode 1. Press BACK repeatedly to goes into this mode. Or, press MODE/MENU repeatedly until is showing up, stop pressing. Note: Press MODE/MENU, you can view Internet Radio, Music player, FM and iPod, AUX mode in turn. Step3 – Access Network Continue above steps, few seconds later, and it will say: Or ☺ If this happens, please follow: a. Check your Router, see it working normally or not. b. Check your LAN cable, make sure it hasn’t damaged, c.
How to shift to wireless network Step 1 – Choose WLAN Setting 1. Refer ‘choose LAN setting’, which u can find at page 12, turn SELECT to confirm. to < Wireless >, press 2. While cursor point to < DHCP enable >, press SELECT to confirm. 3. Turn to the region of your location, press SELECT to confirm.
How to select a station through Podcasts 1. After your radio has successfully connected to network, turn 2. Press SELECT to confirm, and then turn to < Podcasts >. to your favorite option. 3. Press SELECT to confirm, and then step by step to your purpose program. How to get Access code 1. After your radio has successfully connected to network, turn to < Help >, and then press SELECT to confirm. Note: at this step, you can also listening radio FAQ solutions. 2.
How to add station to ‘My favourites’ ☺ 1. visit website: http://www.wifiradio-frontier.com ☺ 2. Click on the register link. ☺ 3. Create account login, you need an Access Code to complete it, which refer to page 15. Note: For next your visiting this website as a member, please remember your registered ‘Email address’ and ‘Password’. ☺ 4. You will able to take advatage of the various additional features and services offered by the Frontier internet Radio Portal. ☺ 5.
How to add station to ‘My Added Stations’ ☺ 1. Visit website: http://www.wifiradio-frontier.com ☺ 2. Login as a member(at previous page, you registered). ☺ 3. You will able to take advatage of the various additional features and services offered by the Frontier internet Radio Portal. ☺ 4. How to play ‘My added stations’? Your need two steps: a. When cursor point to < My added stations >, press SELECT to confirm. b.
Changing the Station Information It is possible to view the information that is displaying on the second line of the display when listening Internet program. To view more information, you can press INFO repeatedly. 1. Description of Station This is scrolling text information supplied by the Internet station. It may comprise information on music titles or details of the programme which is provided by the broadcaster. 2.
Music player Mode Note: To play this order, read appendix at first, which at following pages is highly recommending! A. PLAY SHARED MEDIA 1. Press MODE/MENU repeatedly until < Music player > is showing up. Note: Or, enter < Main menu >, and then turn to < Music player >, press SELECT to confirm. 2. While cursor point to < Shared media >, press SELECT to confirm, and then step by step to your selecting Music. B. Repeat play mode a.
FM Mode A. GENERAL OPERATION 1. Press MODE/MENU repeatedly until < FM Radio > is showing up. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise, the last listened FM station will be selected. Note: to enter this mode, you may also press BACK to go back to ‘Main menu’, and then turn < FM >, press SELECT to confirm. 2. Turn 1. To auto-searching, simply press SELECT. to to increase or decrease the frequency by 0.05MHz per step. Note: a.
C. AUDIO SETTING 1. FM mode, at any step by press BACK to enter, and then turn to < Audio setting >, press SELECT to confirm. 2. Turn to select ‘YES’ or ‘NO’, and then press SELECT to confirm.
iPod Mode You can play the music files stored on your iPod through the stereo speakers. Docking your iPod 1. Insert the Dock Adapter that fits your iPod model. The adaptor No. is marked at the back or side of each dock adapter. Apple’s adapter no. iPod Versions 13 iPod Nano 3rd Gen 14 iPod Touch 1st Gen 16 iPod Touch 2nd Gen 17 iPod Nano 4th Gen 2. Insert your iPod into the iPod dock, the Dock will begin to charge your iPod if necessary.
AUX IN Mode 1. Press MODE/MENU repeatedly until < AUX in > is showing up. Note: Or enter ‘MAIN MENU’, and then turn to < AUX in >, press SELECT to confirm. 2. Through a cable connection, your radio can be transformed into a high quality digital audio speaker system. 3. Connect one end of the audio cable to the headphone (or auxiliary out) socket of your source device, the other end connect to AUX IN socket on the rear of your radio. The radio display will show: 4.
General Operation Return to Main Menu Simply press and hold MODE/MENU button, and then turn to < Main menu >. Alternatively, you can move back to radio’s top-line < Main menu >, at any time by pressing the BACK button. Setting Equaliser Note: set it can be change your radio timbre. 1. It can be activated from < Main menu > < System settings >, while cursor point to < Equaliser >, press SELECT to confirm. 2. Turn to your ideal one, press SELECT to confirm.
Changing the Station Information It is possible to view the information that is displayed on the second line of the display when listening Internet Radio program. To view more information, you can press INFO repeatedly. Note: for this function, ‘AUX in mode’ is out of service.
Setting Station Presets Your Radio can store 10 Internet and 10 FM stations preset, To preset current station: 1. Press and hold one of PRESET buttons 1-10 on remote control, until it say: Selecting a Preset station To select a stored station: 1. Enter corresponding mode by press MODE/MENU repeatedly. 2. Press one of PRESET buttons 1-10 on remote control is OK. Note: a.
Setting Clock 1. It can be activated from < Main menu > Time/Date >. < System settings > 2. Press SELECT to confirm, and then turn < Time/Date > < Set to set date, press SELECT to confirm, using the same method to set month, year, hour and minutes. The ‘Set Time/Date’ is OK now. You can also through ‘Auto update’ for setting the clock. Note: Choose , please ensure your radio is connecting to internet successfully. 1. Turn 2. Turn to < Auto update >, press SELECT to confirm.
Set hour format 1. Turn 2. Turn to < Set format >, press SELECT to confirm. to your selecting one, press SELECT to confirm. Set timezone 1. Turn 2. Turn to < Set Timezone >, press SELECT to confirm. to your location timezone, press SELECT to confirm.
Daylight savings 1. It can be activated from < Main menu > savings >, press SELECT to confirm. 2. Turn < System settings > < Time/Date > < Daylight to ‘ON’, press SELECT to confirm.
Setting Alarm Note: Setting Alarm, make sure Setting Time at first. 1. Press ALARM 1 or ALARM 2 on remote control directly to enter. Alternatively, enter < Main menu > 2. Turn < Alarms >, press SELECT to confirm. to the one you want setting, press SELECT once more. 3. While cursor point to < Enable: Off >, press SELECT to confirm, and then turn desire alarm frequency, press SELECT to confirm. 4.
5. Press SELECT to confirm, turn and then turn to < Mode: Internet radio > press SELECT to confirm, to your purpose one. Note: Alternatively, you may also turn to < Preset: Last listened > to choice alarm sound. 6. Press SELECT to confirm, and then turn and then turn to < Volume: 12 >, press SELECT to confirm, to to your desire volume. 9. Press SELECT to confirm, finally turn to < Save >, press SELECT to confirm.
The display will show ‘Alarm Saved’ for 3 seconds, Alarm icon appeared. To check alarms status, press to enter standby mode. When alarm is coming, press any button to deactivate it, if you touch SNOOZE/SLEEP, which located at top of unit, will stop it between 5-30 minutes, interval time is 5 minutes per step. Note: While in SNOOZE function, the relative alarm should be twinkling, and shows how long it will be elapsed. To cancel Alarm you need to convert alarm ‘On’ to ‘Off’: a.
Sleep Function 1. Directly press SLEEP on remote control. Alternatively, press and hold MODE/MENU to < Main menu > 2. Turn < Sleep >, press SELECT to confirm. to define the sleep period which between 0 – 60 minutes. 3. When your purpose period is appeared, simply stop turning . Note: a. The interval time is 15 minutes per step. B. At this step, and sleep icon shows up, as well as show how long it will be expired. 4. Radio will now automatically put itself into standby mode after it has elapsed. 5.
System settings Network setup Note: a. Use this if you take the Internet Radio to another building where you want to use it. b. Enable you to scan again for connection to another wireless network, or to manually configure the network parameters. 1. It can be activated from < Main menu > confirm. 2. Turn < System settings > < Network >, press SELECT to to your purpose one, press SELECT to confirm. Language 1. It can be activated from < Main menu > to confirm. 2.
Factory reset Note: running this will completely erase your radio’s memory, clearing all WEP/WPA codes and user settings. This will effectively return to its default factory settings. 1. It can be activated from < Main menu > 2. Press SELECT to confirm, and turn 3. Press SELECT to confirm. < System settings > < Factory reset >. to ‘YES’.
Software Updates 1. It can be activated from < Main menu > < System settings > < Software update >, press SELECT to confirm. 2. Turn to < Auto- check setting >, press SELECT, and then turn 3. Press SELECT to confirm, then your radio shows as above step 2, turn to < YES >. to < Check now >, press SELECT to confirm. Following is: It’s completed until now! Note: software update can take several minutes do not switch Radio off until this procedure has been completed.
How to enter Setup wizard 1. It can be activated from < Main menu > SELECT to confirm. < System settings > < Setup wizard >, press 2. Then step by step to set it. SW Version and Radio ID 1. It can be activated from < Main menu > < System settings > < Info >. 2. Press SELECT to confirm.
Setting Backlight A. Setting Power-On level 1. It can be activated from < Main menu > SELECT to confirm. < System settings > < Backlight >, and then press 2. While cursor point to ‘Power-On level’, press SELECT to confirm. 3. Turn to your purpose one, press SELECT to confirm. B. Setting Power-On level 1. At above step 1, turn 2. Turn to < Standby level >, press SELECT to confirm. to your purpose one, press SELECT to confirm.
Appendix Step 1: Set Up Media Sharing in WMP 11 After you download and install Windows Media Player 11 for Windows XP and connect your Radio to the network, you need to set up media sharing so that you can share music with your Radio. The following steps describe how to set up media sharing in Windows Media Player 11. 1. In Windows Media Player 11, click the small arrow below the Library tab, and then click Media Sharing. 2. In the Media Sharing dialogue box, select the Share my media check box.
3. Check the “share my media to” box. In the list, click your Radio *, click Allow, the selected device will now show a green tick and then click OK. * If your device does not appear in the list of devices, perform the following steps; a. From the "Media Player" menu of your internet radio, select "UPNP Servers", a list of available computers will appear. b. Select the required computer. Your device will now appear in the list.
Set Up Media Sharing in MAC OS Using the Radio with a MAC will require Windows File Sharing. MAC OS 9 and earlier versions of the OS will need extra software to use Windows File Sharing, but MAC OS X 10.2 and later versions have Windows File Sharing built into the OS. ------ Set up Windows File Sharing on a MAC - From the 'Dock', click on 'System Preferences'. From the 'System Preferences' window, under the 'Internet & Network' section, click on 'Sharing'.
Troubleshooting If you experience any trouble with your wireless Internet Radio, then you may find it useful to visit the help section on our webpage: http://www.wifiRadio-frontier.com If you have trouble connecting the Radio to your wireless network, these steps may help to resolve the problem: 1. Confirm that a Wi-Fi connected PC can access the Internet (i.e. can browse the web) using the same network. 2. Check that a DHCP server is available, or that you have configured a static IP address on the Radio.
Specification ITEMS DESCRIPTION Specifications: FM/INTERNET Radio with Docking for iPod® Audio Output: 10Wrms X 2 Frequency Ranges: (FM) 87.50 – 108.00 MHz LCD Display: High resolution display Power Requirements: AC Power Input: 100-240VAC, 50-60HZ (for use, please refer rear panel silk-screen) Speaker: 8 ohm Dimension: 300mm x 200mm x 50mm This product has been designed specifically to work with iPod and has been certified by the developer to meet Apple performance standards.