® 5.1 Surround Sound Headphone System PowerMax-HP10 User Manual To ensure the smooth handling of your warranty please write the serial number of your device into the box. In the case of warranty you are expected to send it together with a copy of your invoice to your nearest TEAC sales representative.
• Changes in specifications and features may be made without notice or obligation. • Copyright © 2004, TEAC Corporation. All rights reserved. First Edition: May 2004 • Company and product names provided herein are trademarks of their respective companies.
Contents CE DECLARATION ....................................................................... CONTENT OF PACKAGE ............................................................. FEATURES ..................................................................................... INSTRUCTIONS ............................................................................. CONTROL BUTTONS DEFINITION AND FUNCTION ...................... 5.1 HOME THEATER HEADPHONE CONNECTING CABLES ........ CONNECTING THE MICROPHONE ......
CE DECLARATION We declare the product PowerMax-HP/PowerMax-HP10M complies with the following standards and directives: EMC Directive 89/336/EEC LVD Directive 73/23/EEC EN 55022/1998 EN 60000-3-2/-3-3 EN 55024/1998 EN 60000-4-2/-4-3/-4-4/-4-5/-4-6/-4-8/-4-11 EN 60950 CONTENT OF PACKAGE PowerMax-HP10 existing of 5.1 channel amplifier 6 channel 5.
for DVD movies or music. This makes it possible to enjoy theater feeling at home. Compatible to AC-3/DTS decoders for 5.1-channel playback the front, rear, center, and subwoofer speaker units in the special headphone are controlled separately by a volume controller applied to the headphone connection cable. For conventional 2-channel stereo sources like TV, CD, VCD, MP3 etc., an AUX input is installed: through 5.
CONTROL BUTTONS DEFINITION AND FUNCTION Front Plate Back Plate 1. Power On/Off (On/ Standby) Button 2. Master Volume Knob 3. DVD/AUX source selector switch 4. Channel Indication Light 5. 5.1 Channel Headphone outputs 6. AUX (Stereo) Audio Input 7. DVD (5.1 channel) Audio Input 8. Audio Extension Output 9. DC Power Source (7.5 V adaptor) Input 10. USB Power Source (5V) Input/extension In-line Controller 11. 12. 13. 14.
5.1 HOME THEATER HEADPHONE CONNECTING CABLES A PC signal connecting cable with 3.5mm stereo plugs on both ends. B AMP connection cable with 3.5mm stereo plugs & RCA jacks. C DVD connection cable with RCA jacks and 3.5mm stereo phono plugs. D TV connection cable with 3.5mm stereo phono plug & RCA plugs. E USB extension cable.
F Microphone extension cable with 3.5mm jack & 3.5mm stereo phono plugs. G Adaptor cable for the headphone from G9 to 3.5mm stereo plug to operate as conventional stereo headphones. CONNECTING THE MICROPHONE The microphone is connected to the microphone input (3.5 stereo jack) of your sound card respectively of your computer. PLAYBACK OPERATION When operating this product with DVD or 5 .1 sound cards please connect the six channel audio cable to the front, rear, center and subwoofer 5.1 channel inputs.
volume controller allow to control the volume of the six speaker units individually. Sound environment and vibration effects are the same as on 5.1 source playback. Important: Please follow the instructions given by the labels on the device which are shown below.
CONNECTING THE POWERMAX-HP10 Caution! Before connecting the system, switch off the power of the PowerMax-HP10 and other equipments power sources. 1. Connecting DVD players An external DC power supply is required. Connect a 7.5V DC power supply to the 7.5V DC input jack on the back of the 5.1 amplifier box. DVD players are connected to the input jacks Front, Rear, Sub/ Center over the 6 RCA output jacks. The connection is provided by a DVD and a PC cable. Optionally a 5.
33 | PowerMax-HP10 connecting cable 5.1 channel amplifier TV connecting cable (D) AMP connecting cable (B) Back plate PowerMax-HP10 PC connecting cable (A) 7.
2. Connecting Computers (5.1 Sound Cards) Utilize an USB cable to connect power to the system. The USB 5V power source is connected to the back of the 5.1 amplifier box (USB1). The second USB connector USB2 is intended to replace the occupied USB connector of your computer for other USB devices. In case of audible interference noise (e.g. with notebooks) disconnect the USB cable and install the external power supply. PC 5.1 sound cards and the 3.
35 | PowerMax-HP10 5.1 channel amplifier MP3 device connecting cable 5.
3. Connecting CD players An external DC power supply is required. Connect the 7.5V DC power supply to the 7.5V DC input jack on the back of the 5.1 amplifier box. CD devices can be connected to the input AUX with the PC connecting cable. For power and signal connection method, please refer to the picture below. CD PC connecting cable (A) 7.
4. Connecting VCD player devices An external DC power supply is required. Connect the 7.5V DC power supply to the 7.5V DC input jack on the back of the 5.1 amplifier box. VCD players can be connected to the input AUX with the TV cable. Optionally a stereo amplifier/speaker system can be connected to the pass-through 5.1 front output connectors of the headphone amplifier. It provides the AUX signal for further playback devices. For power and signal connection method, please refer to the picture below.
5. Connecting Computers (Stereo Sound Cards) Utilize an USB cable for power source. Connect the USB 5V power source to the jack USB1 on the back of the 5.1 amplifier box. The second USB connector USB2 can extend the occupied USB connector of your computer for other USB devices. In case of audible interference noise (e.g. with Notebooks) disconnect the USB cable and install the external power supply. PC stereo sound cards can be connected to the input AUX of the amplifier box by a PC audio cable with 3.
6. Connecting Computers (Stereo Sound Cards) Utilize an USB cable for power source. Connect the USB 5V power source to the jack USB1 on the back of the 5.1 amplifier box. The second USB connector USB2 can replace the occupied USB connector of your computer for other USB devices. In case of audible interference noise (e.g. with Notebooks) disconnect the USB cable and install the external power supply. PC stereo sound cards can be connected to the input AUX of the amplifier box by a PC audio cable with 3.
SPECIFICATION 5.1-CHANNELS AMPLIFIER Compatible to Audio Inputs DVD, PC, VCD, CD, TV, MP3, CD-R, CD-DA AUX (Stereo) 1 Set DVD (5.1-channel) 1 Set Audio Outputs 6 Channels 1 Set Audio Specifications Front, Rear, Center. 20Hz-20kHz Subwoofer 20Hz-120Hz Signal/Noise ratio >=80dB Selection >-60dB Distortion <0.5% Power supply AC/DC power supply 230/7.5V, 500mA, 3.75W USB power 5.0V, 500mA, 2.5W Dimensions (W x D x H) 90 x 155 x 143 mm Weight amplifier approx.
WARRANTY Model Serial No. PowerMax-HP10 Owner's name Address Dealer's name Date of purchase Dealer's address Warranty Period TEAC Corporation, hereinafter called TEAC, warrants this product against any defect in material and workmanship for two (2) years from the date of purchase by the original retail purchaser.
3. Damage, deterioration or malfunction resulting from: (a) accident, misuse, abuse or neglect; (b) failure to follow instructions supplied with the product; (c) any shipment of the product. Any damage arising of transportation is the liability of the freight company. Any damage arising of transportation and any implicit and explicit risks are the liability of the freight company.
2. After identifying the nearest authorized service station for this product the product or any parts believed to be defective must be shipped freight and insurance prepaid to such service station, together with a copy of this warranty certificate and a copy of your sales receipt, showing the date of purchase. Please ensure to fill out the warranty certificate correctly (do not forget the serial number of the product).
TEAC Europe GmbH, DSPD: Bahnstraße 12, 65205 Wiesbaden-Erbenheim, Germany Internet: www.teac.de TEAC Service Center: TEAC Service Centre Europe Hessenring 25 64546 Mörfelden-Walldorf, Germany www.teac.
3. Damage, deterioration or malfunction resulting from: (a) accident, misuse, abuse or neglect; (b) failure to follow instructions supplied with the product; (c) any shipment of the product. Any damage arising of transportation is the liability of the freigth company. Any damage arising of transportation and any implicit and explicit risks are the liability of the freigth company.
65205 Wiesbaden-Erbenheim Germany TEAC Europe GmbH DSPD Bahnstraße 12 TEAC Service Center: TEAC Service Centre Europe Hessenring 25 64546 Mörfelden-Walldorf, Germany www.teac.de/rma TEAC Europe GmbH, DSPD: Bahnstraße 12, 65205 Wiesbaden-Erbenheim, Germany Internet: www.teac.