Brochure

ManualsBrandsTE Connectivity ManualsConnector ToolsCrimp die set 24 AWG 30 AWG

Tyco Electronics Corporation

Harrisburg, PA

tycoelectronics.com

82181–7.5M–LUG–FP–4-08–2–0G3B

AMP Soft Shell Pin

and Socket Connectors

Catalog 82181 Revised 4-08

Soft Shell Pin and Socket Connectors

Summary of content (134 pages)

PAGE 1
Catalog 82181 Revised 4-08 tycoelectronics.com 82181–7.
PAGE 2
Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) At Tyco Electronics, we’re ready to support your RoHS requirements. We’ve assessed more than 1.5 million end items/components for RoHS compliance, and issued new part numbers where any change was required to eliminate the restricted materials. Part numbers in this catalog are RoHS Compliant, unless marked otherwise.
PAGE 3
Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. AMP-DUAC 125 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 Universal MATE-N-LOK Universal MATE-N-LOK II .
PAGE 4
Soft Shell Pin and Socket Connectors AMP Table of Contents (Continued) High Density Need more information? Call Technical Support at a local number listed on the inside back cover. Technical Support is staffed with specialists well versed in Tyco Electronics products. 2.5 mm Signal Double Lock (2.5 SDL) Connectors ......................9-16 Product Facts .............................................................................................................9 Performance Characteristics .............
PAGE 5
Soft Shell Pin and Socket Connectors AMP Table of Contents (Continued) Mini-Universal MATE-N-LOK Connectors ................................83-94 Product Facts............................................................................................................83 Performance Characteristics................................................................................83-84 Mating Combinations ...............................................................................................
PAGE 6
Soft Shell Pin and Socket Connectors AMP Table of Contents (Continued) Standard Density 5.0 mm Power Key Connectors (5.0 PKC).............................135-141 Product Facts .........................................................................................................135 Performance Characteristics ...................................................................................135 Quick Reference Chart for Mating Part Numbers.....................................................
PAGE 7
Soft Shell Pin and Socket Connectors AMP Table of Contents (Continued) Standard Density Universal MATE-N-LOK Connectors ....................................169-185 Product Facts..........................................................................................................169 Performance Characteristics............................................................................169-170 Mating Combinations ...........................................................................................
PAGE 8
Soft Shell Pin and Socket Connectors AMP Engineering Notes 8 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C.
PAGE 9
Soft Shell Pin and Socket Connectors AMP High Density 2.5 mm Signal Double Lock (2.5 SDL) Connectors (Wire-to-Board and Wire-to-Wire) Product Facts Connector for signal circuits with one row of contacts on 2.5 mm centerline ■ Wire-to-board and wire-towire connectors, consisting of plug and cap housings for wire termination and PC board-mount post headers ■ Mounted to plug and cap housings for wire application, double lock plate provides for positive loading of contacts in the housing.
PAGE 10
High Density Soft Shell Pin and Socket Connectors AMP 2.5 mm Signal Double Lock (2.5 SDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) Quick Reference Chart for Mating Part Numbers 2.5 mm Signal Double Lock .098 [2.50] Centerline 2 3 4 5 6 7 8 9 10 11 12 13 Mating Connectors (PC Board Mount & Wire Side) Plug Connector Part No. (Wire Side) No. of Pos.
PAGE 11
Soft Shell Pin and Socket Connectors AMP High Density 2.5 mm Signal Double Lock (2.5 SDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) Mating Configurations Wire-to-Wire Connections 2.5 mm Signal Double Lock .098 [2.50] Centerline Wire-to-PC Board Connections Standard-Profile Type High-Profile Type Note: Dimensions shown are metric. 11 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified.
PAGE 12
High Density Soft Shell Pin and Socket Connectors AMP 2.5 mm Signal Double Lock (2.5 SDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) Contacts Material and Finish 2.5 mm Signal Double Lock .098 [2.50] Centerline Pre-tinned phosphor bronze (0.2 mm thick) Receptacle for Plug Housing, Tab for Cap Housing Tab Receptacle Contact Part Number Wire Range AWG mm2 26-22 22-20 0.12~0.35 0.30~0.53 Wire Ins. Dia. 0.93~1.50 1.40~1.
PAGE 13
Soft Shell Pin and Socket Connectors AMP High Density 2.5 mm Signal Double Lock (2.5 SDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) Plug Housings (For Receptacle Contacts) 2 to 13 Positions 2.5 mm Signal Double Lock .098 [2.50] Centerline Material UL94V-0, 6/6 Nylon, color (see chart) Related Product Data Receptacle Contact Part No. 917684-1 (26-22 AWG) 917683-1 (22-20 AWG) Double Lock Plate—page 12 Mating Cap Housings—page 14 Mating Post Headers—pages 15-16 No. of Pos.
PAGE 14
High Density Soft Shell Pin and Socket Connectors AMP 2.5 mm Signal Double Lock (2.5 SDL) Connectors (Wire-to-Wire) Cap Housings (For Tab Contacts) 2.5 mm Signal Double Lock .098 [2.50] Centerline 2 to 10 Positions Material UL94V-0, 6/6 Nylon, color (see chart) Related Product Data Tab Contact Part No. 917765-1 (26-22 AWG) 917764-1 (22-20 AWG) Double Lock Plate—page 12 Mating Plug Housings— page 13 Section X-X Section X-X No. of Pos. 2 3 4 5 6 7 8 10 Cap Housing Part Number Dimensions A 02.5 05.
PAGE 15
Soft Shell Pin and Socket Connectors AMP High Density 2.5 mm Signal Double Lock (2.5 SDL) Connectors (Wire-to-Wire) (Continued) Vertical Post Headers (For PC Board Mount) Standard-Profile Type 2.5 mm Signal Double Lock .098 [2.50] Centerline 2 Pos. Material and Finish Header Housings UL94V-0, 6/6 Nylon, glass filled, color (see chart) Post Contact Pre-tinned copper alloy 3 to 13 Pos. Designs of 5 pos. to 8 pos. header housings are slightly different, please request the drawings.
PAGE 16
High Density Soft Shell Pin and Socket Connectors AMP 2.5 mm Signal Double Lock (2.5 SDL) Connectors (Wire-to-Wire) (Continued) Vertical Post Headers (For PC Board Mount) High-Profile Type Related Product Data Mating Plug Housings—page 13 2.5 mm Signal Double Lock .098 [2.50] Centerline Material and Finish 3 to 13 Pos. Header Housing—UL94V-0, 6/6 Nylon, glass filled, color (see chart) Post Contact—Pre-tinned copper alloy Designs of 5 pos. to 8 pos.
PAGE 17
Soft Shell Pin and Socket Connectors AMP Micro MATE-N-LOK 3 mm Connector System High Density Product Facts Wire-to-wire and wire-toboard pin and receptacle connector system ■ Contacts are on 3 mm [.118] centerline spacing ■ 2-12 contact positions – single row ■ 2-24 contact positions – dual row ■ Panel mount or free-hanging wire-to-wire configurations ■ Dual beam contact design for reliable interconnection ■ Contacts accept 24-20 [0.2-0.6] and 30-26 [0.05-0.15] AWG wire with insulation diameter of .
PAGE 18
Soft Shell Pin and Socket Connectors AMP High Density Micro MATE-N-LOK 3 mm Connector System (Continued) Connector Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-21 Crimp, Snap-In Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Receptacle Housings Single Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 19
Soft Shell Pin and Socket Connectors AMP Micro MATE-N-LOK 3 mm Connector System (Continued) Receptacle Contact High Density Connector Application — Wire-to-Wire and Wire-to-Panel Plug Housing Contact Housing Single Row Micro MATE-N-LOK 3 mm Connector System .118 [3.
PAGE 20
Soft Shell Pin and Socket Connectors AMP High Density Micro MATE-N-LOK 3 mm Connector System (Continued) Connector Application — Wire-to-PCB Header Receptacle Contact Housing Single Row Micro MATE-N-LOK 3 mm Connector System .118 [3.
PAGE 21
Soft Shell Pin and Socket Connectors AMP Micro MATE-N-LOK 3 mm Connector System (Continued) Receptacle Contact High Density Connector Application — Wire-to-PCB Header Housing Dual Row Micro MATE-N-LOK 3 mm Connector System .118 [3.
PAGE 22
Soft Shell Pin and Socket Connectors AMP High Density Micro MATE-N-LOK 3 mm Connector System (Continued) Crimp, Snap-In Contacts Material and Finish Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Receptacle — Phosphor Bronze Plug — Brass Plating A — .000100 (.000254) minimum bright tin entire stock over .000050 (.000127) minimum nickel entire stock Plating B — .000015 (.000038) minimum gold in localized gold plate area. .000100 (.
PAGE 23
Soft Shell Pin and Socket Connectors AMP Micro MATE-N-LOK 3 mm Connector System (Continued) High Density Receptacle Housings Single Row Material Related Product Data Contacts: Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Nylon, Black Flammability Rating—UL 94V-0 .553 [14.04] Receptacle Contacts—page 22 Mateable Housings and Headers: .118 [3.00] Typ.
PAGE 24
Soft Shell Pin and Socket Connectors AMP High Density Micro MATE-N-LOK 3 mm Connector System (Continued) Receptacle Housings (Continued) Dual Row Material Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Nylon, Black Flammability Rating—UL 94V-0 Related Product Data Contacts: .553 [14.04] Receptacle Contacts—page 22 Mateable Housings and Headers: .118 [3.00] Typ.
PAGE 25
Soft Shell Pin and Socket Connectors AMP Micro MATE-N-LOK 3 mm Connector System (Continued) High Density Plug Housings Single Row, Free-Hanging Material Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Nylon, Black Flammability Rating—UL 94V-0 Related Product Data Contacts: Plug Contacts—page 22 .118 [3.00]Typ. Mateable Housings: Single Row Receptacle Housings— page 23 .152 [3.86] .335 [8.50] A .665 [16.89] Number of Circuits 2 3 4 5 6 7 8 9 10 11 12 Dimension A .270 6.85 .388 9.
PAGE 26
Soft Shell Pin and Socket Connectors AMP High Density Micro MATE-N-LOK 3 mm Connector System (Continued) Plug Housings (Continued) Single Row, Panel Mount .125 [3.18] .120 [3.05] Material .166 [4.21] .217 [5.51] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Nylon, Black Flammability Rating—UL 94V-0 Related Product Data Contacts: B Plug Contacts—page 22 C Recommended Panel Cutout* Mateable Housings: Single Row Receptacle Housings— page 23 .118 [3.00] Ref. .152 [3.86] .335 [8.
PAGE 27
Soft Shell Pin and Socket Connectors AMP Micro MATE-N-LOK 3 mm Connector System (Continued) High Density Plug Housings (Continued) Dual Row, Free-Hanging Material Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Nylon, Black Flammability Rating—UL 94V-0 Related Product Data Contacts: Plug Contacts—page 22 .118 [3.00] Ref. Mateable Housings: Dual Row Receptacle Housings— page 24 .118 [3.00] .270 [6.86] .335 [8.50] A Number of Circuits 2 4 6 8 10 12 14 16 18 20 22 24 .665 [16.
PAGE 28
Soft Shell Pin and Socket Connectors AMP High Density Micro MATE-N-LOK 3 mm Connector System (Continued) Plug Housings (Continued) Dual Row, Panel Mount .078 [1.98] .160 [4.06] Material Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Nylon, Black Flammability Rating—UL 94V-0 .280 [7.11] Related Product Data Contacts: .343 [8.71] B Plug Contacts—page 22 C Mateable Housings: Recommended Panel Cutout* Dual Row Receptacle Housings— page 24 .118 [3.00] Ref. .270 [6.86] .335 [8.
PAGE 29
Soft Shell Pin and Socket Connectors AMP Micro MATE-N-LOK 3 mm Connector System (Continued) High Density .118 [3.00] New: Low Profile .152 [3.86] Low Profile Receptacle Housings .250 [6.37] A Material Positions Color 2 Black 3 Black 4 Black 2 Natural 3 Natural 4 Natural Low Profile Right Angle Surface Mount Housings Dimension A .276 7 .394 10 .512 13 .276 7 .394 10 .512 13 Micro MATE-N-LOK 3 mm Connector System .118 [3.
PAGE 30
Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) Vertical Header Assemblies A Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Single Row, Through-Hole, with Retention Feature on Soldertail and Polarization Feature to PCB .051 [1.30] .364 [9.24] Ref. .125 [3.18] Ref. Circuit 1 .152 [3.86] .020 [0.
PAGE 31
Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) High Density Vertical Header Assemblies (Continued) .364 [9.24] Ref. A .051 [1.30] .125 [3.18] Ref. Single Row, Through-Hole, with Metal Through-Hole Hold-down Contact Circuit 1 .152 [3.86] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Hold-down .020 [0.
PAGE 32
Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) Vertical Header Assemblies .364 [9.24] Ref. (Continued) Single Row, Surface Mount, with Metal Through-Hole Hold-down .236 [6.00] Dia. .118 [3.00] Ref. .051 [1.30] Contact .113 [2.88] Ref. .156 [3.97] Ref. Circuit 1 Material and Finish Micro MATE-N-LOK 3 mm Connector System .118 [3.
PAGE 33
Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) .236 [6.00] Dia. (Continued) .118 [3.00] Ref. .051 [1.30] Circuit 1 Single Row, Surface Mount, with Surface Mount Hold-down Housing — High Temperature Nylon, Black Flammability Rating — UL 94V-0 Hold-down .020 [0.51] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .152 [3.86] Material and Finish A Contacts—Brass Plating A—.000100 [0.00254] min. tin over .
PAGE 34
Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) .270 [6.86] Vertical Header Assemblies (Continued) .118 [3.00] Z Dual Row, Through-Hole, with Retention Feature on Soldertail Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .364 [9.24] Material and Finish Housing — High Temperature Nylon, Black Flammability Rating — UL 94V-0 Z Contacts—Brass Plating A—.000100 [0.00254] min. tin over .000050 [0.
PAGE 35
Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) .118 [3.00] Z (Continued) Dual Row, Through-Hole, with Retention Feature on Soldertail and Metal Through-Hole Hold-down High Density .270 [6.86] Vertical Header Assemblies .364 [9.24] Contact Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Material and Finish Housing—High Temperature Nylon, Black Flammability Rating—UL 94V-0 .125 [3.18] .118 [3.
PAGE 36
Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) .118 [3.00] Typ. Vertical Header Assemblies (Continued) .431 [10.94] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Dual Row, Surface Mount, with Metal Through-Hole Hold-down .236 [6.00] Dia. Material and Finish Housing—High Temperature Nylon, Black Flammability Rating—UL 94V-0 Contacts—Brass Plating A—.000100 [0.00254] min. tin over .000050 [0.
PAGE 37
Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) High Density Vertical Header Assemblies .118 [3.00] Typ. (Continued) Dual Row, Surface Mount, with Surface Mount Hold-down .431 [10.94] Housing — High Temperature Nylon, Black Flammability Rating — UL 94V-0 .236 [6.00] Dia. A Contacts—Brass Plating A—.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B—.000015 [0.00038] gold in mating area, .000100 [0.
PAGE 38
Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) Right-Angle Header Assemblies A .051 [1.30] .152 [3.86] Hold-down Single Row, Through-Hole, with Metal Through-Hole Hold-down Contact .285 [7.25] Ref. Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Circuit 1 .020 [0.51] .351 [8.92] Ref. Material and Finish .118 [3.00] Ref.
PAGE 39
Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) High Density Right-Angle Header Assemblies (Continued) A .051 [1.30] .152 [3.86] Circuit 1 Single Row, Through-Hole, with Plastic Boardlock .002 [0.51] Material and Finish Housing — High Temperature Nylon, Black Flammability Rating — UL 94V-0 Contacts—Brass Plating A—.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B—.000015 [0.00038] gold in mating area, .
PAGE 40
Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) Right-Angle Header Assemblies (Continued) A .152 [3.86] Single Row, Surface Mount, with Metal Through-Hole Hold-down Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .051 [1.30] Circuit 1 Hold-down Contact .285 [7.25] Ref. .020 [0.51] Material and Finish .439 [11.16] Ref.
PAGE 41
Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) A High Density Right-Angle Header Assemblies (Continued) .051 [1.30] Circuit 1 .152 [3.86] Hold-down Single Row, Surface Mount, with Surface Mount Hold-down Contact .020 [0.51] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .439 [11.16] Ref. Material and Finish Housing — High Temperature Nylon, Black Flammability Rating — UL 94V-0 Contacts—Brass Plating A—.
PAGE 42
Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) Right-Angle Header Assemblies (Continued) A .051 [1.30] .152 [3.86] Circuit 1 Single Row, Surface Mount, with Plastic Boardlock .310 [7.88] Ref. Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .020 [0.51] Material and Finish .181 [4.60] Ref. Housing — High Temperature Nylon, Black Flammability Rating — UL 94V-0 Contacts—Brass Plating A—.000100 [0.
PAGE 43
Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) A High Density Right-Angle Header Assemblies (Continued) .051 [1.30] Dual Row, Through-Hole, with Metal Through-Hole Hold-down .290 [7.37] .404 [10.25] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Material and Finish Housing — High Temperature Nylon, Black Flammability Rating — UL 94V-0 .351 [8.92] .469 [11.92] Contacts—Brass Plating A—.000100 [0.00254] min.
PAGE 44
Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) Right-Angle Header Assemblies (Continued) A .051 [1.30] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Dual Row, Through-Hole, with Plastic Boardlock .428 [10.88] .290 [7.37] Material and Finish Housing — High Temperature Nylon, Black Flammability Rating — UL 94V-0 .351 [8.92] Contacts—Brass Plating A—.000100 [0.00254] min. tin over .000050 [0.
PAGE 45
Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) High Density Right-Angle Header Assemblies (Continued) Contacts .404 [10.25] Dual Row, Surface Mount, with Metal Through-Hole Hold-down .290 [7.37] .051 [1.30] .118 [3.00] Material and Finish Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .439 [11.16] Hold-down .615 [15.
PAGE 46
Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) Right-Angle Header Assemblies (Continued) A Dual Row, Surface Mount, with Plastic Boardlock Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .428 [10.88] .290 [7.37] .051 [1.30] Material and Finish .439 [11.16] Housing — High Temperature Nylon, Black Flammability Rating — UL 94V-0 .615 [15.63] Contacts—Brass Plating A—.000100 [0.00254] min.
PAGE 47
Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) High Density Right-Angle Header Assemblies (Continued) .051 [1.30] A Hold-down Contacts .290 [7.37] Dual Row, Surface Mount, with Surface Mount Hold-down Material and Finish Housing — High Temperature Nylon, Black Flammability Rating — UL 94V-0 Contacts—Brass Plating A—.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B—.000015 [0.
PAGE 48
Soft Shell Pin and Socket Connectors AMP Engineering Notes 48 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C.
PAGE 49
Soft Shell Pin and Socket Connectors AMP Grace Inertia Connectors (GIC), 3.5 mm Centerline (Wire-to-Wire Connectors) Product Facts Grace Inertia Connectors .137 [3.50] Centerline wire-to-wire connectors (3.
PAGE 50
Soft Shell Pin and Socket Connectors AMP Grace Inertia Connectors (GIC), 3.5 mm Centerline (Wire-to-Wire Connectors) (Continued) High Density Contacts Material and Finish Pre-tinned Copper Alloy 1.2 PM A 1.9 Grace Inertia Connectors .137 [3.50] Centerline PM A Tab Contact (For Cap Housing) 2.8 Receptacle Contact (For Plug Housing) 13.4 16.5 0.5 MAX CUT OFF TAB 6 0.5 MAX CUT OFF TAB 0.5 2.04 2.04 2.3 Wire Range AWG 26-22 22-18 Insulation Dia. mm mm2 0.13-0.34 0.3-0.9 1.3-2.0 1.5-2.
PAGE 51
Soft Shell Pin and Socket Connectors AMP Grace Inertia Connectors (GIC), 3.5 mm Centerline (Wire-to-Wire Connectors) (Continued) 2 Position High Density Material 6/6 Nylon, UL94V-0 (CTI 600 V or more) Plug Housing (For Receptacles) Cap Housing (For Tabs) 26.4 19.4 14 9.05 9.1 7.75 2 1 7.75 1 tyco 2 Grace Inertia Connectors .137 [3.50] Centerline CIRCUIT NO. 7.85 CAVITY MARK R2 3.5 R1 3.5 R1 A 9.3 6.45 R0 .9 R1 R1 R1 7.4 9.
PAGE 52
Soft Shell Pin and Socket Connectors AMP Grace Inertia Connectors (GIC), 3.5 mm Centerline (Wire-to-Wire Connectors) (Continued) High Density 4 Position Plug Housing (For Receptacles) Cap Housing (For Tabs) 26.4 9.05 7.75 9.1 1 tyco 2 7.75 19.4 Grace Inertia Connectors .137 [3.50] Centerline 7.85 R1 3.5 R0 R1 R1 13.95 R1 .9 4.8 14.2 A 11.1 4.8 12.05 A 3.
PAGE 53
Soft Shell Pin and Socket Connectors AMP .062 [1.
PAGE 54
Soft Shell Pin and Socket Connectors AMP .062 [1.57] Commercial Pin and Socket Connectors (Continued) Performance Characteristics Current Rating Verification for 30°C Maximum Temperature Rise 100% Energized (Continued) .062 [1.57] Commercial Pin and Socket Connectors .145 [3.68] Centerline High Density Maximum Current—Maximum current rating of .
PAGE 55
Soft Shell Pin and Socket Connectors AMP .062 [1.57] Commercial Pin and Socket Connectors (Continued) Contacts Pin Diameter .062 [1.57] Material .665 [16.89] Pin Related Product Data Wire Size AWG mm2 Ins. Dia. Socket Material & Finish Brass Pre-tin .060 Brass, 30-24 0.05-0.2 1.52 Max. Select Gold1 Phos. Brz., Pre-tin Brass Pre-tin 24-18 0.2-0.9 .050-.110 1.27-2.79 Phos. Brz., Pre-tin Brass, Select Gold1 Phos. Brz., Select Gold1 .062 [1.57] Commercial Pin and Socket Connectors .145 [3.
PAGE 56
Soft Shell Pin and Socket Connectors AMP .062 [1.57] Commercial Pin and Socket Connectors (Continued) Housings 1 Circuit Free-Hanging or Panel Mount .203 [5.16] Min. Dia. .145 [3.68] Centerline spacing High Density Material Housing —Nylon, natural color Flammability Rating —UL94V-2 .200 [5.08] Max. Dia. Related Product Data C .300 [7.62] Dia. Receptacle C Plug Contacts — page 55 .062 [1.57] Commercial Pin and Socket Connectors .145 [3.
PAGE 57
Soft Shell Pin and Socket Connectors AMP .062 [1.57] Commercial Pin and Socket Connectors (Continued) Housings 4, 6, and 9 Circuit, Matrix Free-Hanging or Panel Mount .145 [3.68] Centerline spacing .145 [3.68] Typ. Housing — Nylon, natural color Flammability Rating — UL94V-2 Panel-Mount Flange .145 [3.68] Related Product Data High Density .145 [3.68] Typ. Material Panel-Mount Flange .145 [3.68] A A Contacts — page 55 C Recommended Panel Cutouts Plug Maximum panel thickness is .060 [1.52].
PAGE 58
Soft Shell Pin and Socket Connectors AMP Engineering Notes 58 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C.
PAGE 59
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) Product Facts ■ Power R Power Double Lock Connectors are compact connectors designed for use in power circuit applications and are ideally suited for wiring in refrigerators, air conditioners, washing machines, gas equipment, copying machines and automatic vending machines. These connectors can be used alone by inserting wire-terminated crimp snap-in contacts into the housing.
PAGE 60
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) Quick Reference Chart for Mating Part Numbers Quick Reference Chart Mating Connectors (Wire and PC Board Mount Side) Plug Connector (Wire Side) Housing High Density No. of Pos. Part No. Part No. of Applicable Double Lock Plate No. of Pos. 316770-1x1 1 2 Power Double Lock (PDL) Connectors .156 [3.96], .256 [6.50], .312 [7.92] and .512 [13.00] Centerlines ■ 3.96 mm and 7.
PAGE 61
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) Contacts and Product Composition Contacts Material and Finish Pre-tinned copper alloy High Density Receptacle for Plug Housing, Tab for Cap Housing Receptacle Ins. Dia. (Note) AWG mm2 26-22 0.14~0.34 1.30~2.00 20-16 0.51~1.38 2.00~3.10 Contact Part No.
PAGE 62
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) 3.96 mm Centerline Free-Hanging Plug Housing 1 Circuit Wire-to-Wire Material—UL94V-0, 6/6 Nylon High Density Part Number 316768-1 (Natural) 316768-2 (Red) 316768-4 (Yellow) 316768-6 (Blue) 316768-9 (Black) Related Product Data Receptacle Contacts—page 61 Mating Cap Housings (Free-Hanging)—pages 65-66 Double Lock Plate—page 71 Section X-X Power Double Lock (PDL) Connectors .156 [3.
PAGE 63
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) 3.
PAGE 64
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) 3.96 mm Centerline Free-Hanging Plug Housing 9 Circuits Wire-to-Wire Related Product Data Receptacle Contacts—page 61 Mating Cap Housings (Panel Mount)—pages 67-70 Double Lock Plate—page 71 High Density Material UL94V-0, 6/6 Nylon Part Number 177903-1 (Natural) 177903-4 (Yellow) 177903-6 (Blue) Power Double Lock (PDL) Connectors .156 [3.
PAGE 65
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Wire) 3.96 mm Centerline Free-Hanging Cap Housing 1 Circuit Wire-to-Wire Part Number 316769-1 (Natural) 316769-2 (Red) 316769-4 (Yellow) 316769-6 (Blue) 316769-9 (Black) High Density Related Product Data Tab Contacts—page 61 Mating Plug Housings (Free-Hanging)—pages 62-64 Double Lock Plate—page 71 Material UL94V-0, 6/6 Nylon Power Double Lock (PDL) Connectors .156 [3.
PAGE 66
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Wire) (Continued) 3.96 mm Centerline Free-Hanging Cap Housing 4 Circuits (2 Rows) Wire-to-Wire Related Product Data Tab Contacts—page 61 Mating Plug Housings (Free-Hanging)—pages 62-64 Double Lock Plate—page 71 High Density Material UL94V-0, 6/6 Nylon Part Number 179465-1 (Natural) 179465-4 (Yellow) 179465-6 (Blue) Section X-X Power Double Lock (PDL) Connectors .156 [3.
PAGE 67
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Wire) (Continued) 3.96 mm Centerline Panel Mount Cap Housing 2 Circuits Wire-to-Wire Material—UL94V-0, 6/6 Nylon High Density Part Number 177906-1 (Natural) 177906-2 (Red) 177906-4 (Yellow) 177906-6 (Blue) 177906-9 (Black) Panel Cutout (Applicable Board Thickness: 0.8~2.0 mm) Panel Mounting Direction Power Double Lock (PDL) Connectors .156 [3.
PAGE 68
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Wire) (Continued) 3.96 mm Centerline Panel Mount Cap Housing 4 Circuits (2 Rows) Wire-to-Wire High Density Material UL94V-0, 6/6 Nylon Part Number 177908-1 (Natural) 177908-4 (Yellow) 177908-6 (Blue) Power Double Lock (PDL) Connectors .156 [3.96] Centerlines Related Product Data Tab Contacts—page 61 Mating Plug Housings (Free-Hanging)—pages 62-64 Double Lock Plate—page 71 Panel Cutout (Applicable Board Thickness: 0.
PAGE 69
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Wire) (Continued) 3.96 mm Centerline Panel Mount Cap Housing 9 Circuits Wire-to-Wire Material UL94V-0, 6/6 Nylon High Density Part Number 177911-1 (Natural) 177911-4 (Yellow) 177911-6 (Blue) Panel Cutout (Applicable Board Thickness: 0.8앑2.
PAGE 70
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Wire) (Continued) 3.96 mm Centerline Panel Mount Cap Housing 12 Circuits Wire-to-Wire High Density Material UL94V-0, 6/6 Nylon Part Number 177913-1 (Natural) 177913-4 (Yellow) 177913-6 (Blue) Power Double Lock (PDL) Connectors .156 [3.96] Centerlines Related Product Data Tab Contacts—page 61 Mating Plug Housings (Free-Hanging)—pages 62-64 Double Lock Plate—page 71 Panel Cutout (Applicable Board Thickness: 0.8앑2.
PAGE 71
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) 3.96 mm Centerline Double-Lock Plates Double Lock Plates For 1 Circuit For 2 Circuits For 3 Circuits Material UL94V-0, glass filled 6/6 Nylon, natural color High Density Part Number 316770-1 (1 Pos.) 177918-1 (2 Pos.) 177919-1 (3 Pos.) 177920-1 (4 Pos.) 177921-1 (5 Pos.) For 4 Circuits No. of Pos. 1 2 3 4 (1 Row) 4 (2 Rows) 6 8 9 10 12 For 5 Circuits Applicable Housing Part No.
PAGE 72
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board) 3.96 mm Centerline for PC Board Mount Tab Header, Vertical 2 Circuits Wire-to-Board High Density Material and Finish Housing—UL 94V-0, glass filled 6/6 Nylon Contact—Copper alloy, Tin plated Power Double Lock (PDL) Connectors .156 [3.96] Centerlines Part Number 179838-1 (Natural) 179838-2 (Red) 179838-4 (Yellow) 179838-6 (Blue) 179838-9 (Black) Section X-X Section Y-Y Tube (53 ea.
PAGE 73
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board) (Continued) 3.96 mm Centerline for PC Board Mount Tab Header, Vertical (Continued) 4 Circuits (2 Rows) Wire-to-Board Part Number 179840-1 (Natural) 179840-4 (Yellow) 179840-6 (Blue) Section X-X Section Y-Y Power Double Lock (PDL) Connectors .156 [3.96] Centerlines Related Product Data Mating Plug Housings (Free-Hanging)—pages 62-64 High Density Material and Finish Housing—UL 94V-0, glass filled 6/6 Nylon.
PAGE 74
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board) (Continued) 3.96 mm Centerline for PC Board Mount Tab Header, Vertical 12 Circuits Wire-to-Board High Density Material and Finish Housing—UL 94V-0, glass filled 6/6 Nylon Contact—Copper alloy, Tin plated Part Number 179843-1 (Natural) 179843-4 (Yellow) 179843-6 (Blue) Power Double Lock (PDL) Connectors .156 [3.96] and .312 [7.
PAGE 75
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) 6.5 mm Centerline Free-Hanging Plug Housing 2 Circuits 12.5 ±0.1 Wire-to-Board 17.2 ±0.1 Related Product Data Receptacle Contacts—page 61 Double Lock Plate—page 77 Mating Tab Headers—pages 79-81 Material UL 94V-0, 6/6 Nylon Circuit # High Density Part Number 1939344-1 (Natural) 1.35 REF 6.45 REF 4.1 +0.1 -0 6.5 Centerline 20.6 +0.25 -0 0.85 +0.1 -0.
PAGE 76
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) 6.5 mm Centerline Free-Hanging Plug Housing 6 Circuits Housing Lock Type B Wire-to-Board High Density Material UL 94V-0, 6/6 Nylon Part Number Housing Lock Type A 179862-1 (Natural) 179862-4 (Yellow) 179862-6 (Blue) Power Double Lock (PDL) Connectors .256 [6.
PAGE 77
Soft Shell Pin and Socket Connectors AMP Power Double Lock (PDL) Connectors (Wire-to-Board and Wire-to-Wire) (Continued) 6.5 mm Centerline Double-Lock Plates Material UL94V-0, glass filled 6/6 Nylon, natural color For 2 Circuits For 3 Circuits Wire-to-Board Wire-to-Board High Density Part Number 316061-1 (2-Circuits) 316062-1 (3-Circuits) 316063-1 (4-Circuits) 353891-1 (6-Circuits) Related Product Data Plug Housings (Free-Hanging)—pages 75-76 Power Double Lock (PDL) Connectors .256 [6.
PAGE 78
Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Power Double Lock (PDL)(Continued) Connectors (Wire-to-Board) (Continued) 6.5 mm Centerline Panel Mount Cap Housing 26.1 (9.6) (4.2) 2.1 2 Circuits 10.4 ± 0.13 Wire-to-Wire 10.35 ± 0.13 High Density Material and Finish Housing—UL 94V-0, glass filled 6/6 Nylon Contact—Copper alloy, Tin plated 12.5 7.8 ± 0.13 8.4 ± 0.13 12 Part Number 1939343-1 (Natural) (2.45) 9.2 Power Double Lock (PDL) Connectors .256 [6.50] Centerlines 7.
PAGE 79
Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Power Double Lock (PDL)(Continued) Connectors (Wire-to-Board) (Continued) 6.5 mm Centerline (2 Pos.=13 mm Centerline) PC Board Mount Tab Header, Vertical 3 Circuits Wire-to-Board Section Y-Y Section X-X Part Number 179846-1 (Natural) 179846-4 (Yellow) 179846-6 (Blue) PC Board Layout (Applicable Board Thickness: 1.
PAGE 80
Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Power Double Lock (PDL)(Continued) Connectors (Wire-to-Board) (Continued) 6.5 mm Centerline PC Board Mount Tab Header, Vertical 4 Circuits (2 Rows) Wire-to-Board High Density Material and Finish Housing—UL 94V-0, glass filled 6/6 Nylon Contact—Copper alloy, Tin plated Power Double Lock (PDL) Connectors .256 [6.50] Centerlines Part Number 179848-1 (Natural) 179848-4 (Yellow) 179848-6 (Blue) Tube (40 ea.
PAGE 81
Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Power Double Lock (PDL)(Continued) Connectors (Wire-to-Board) (Continued) 6.5 mm Centerline PC Board Mount Tab Header, Vertical 12 Circuits Wire-to-Board Section X-X Section Y-Y Power Double Lock (PDL) Connectors .256 [6.
PAGE 82
Soft Shell Pin and Socket Connectors AMP Engineering Notes 82 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C.
PAGE 83
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors Product Facts Compact, durable housings ■ Pins and sockets can be accommodated in the same housings ■ Contacts fully protected in the housings. Both pins and sockets can be used on the power supply wiring ■ Fully polarized to provide proper plug-to-cap mating incorporating a positive locking mechanism to help prevent accidental disengagement of mated connectors.
PAGE 84
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Performance Characteristics (Continued) High Density Maximum Current—Maximum current rating of Mini-Universal MATE-N-LOK connectors is limited by the maximum operating temperature of the housings which is 105°C including the temperature rise of the contacts which is a maximum of 30°C.
PAGE 85
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Mini-Universal MATE-N-LOK Connector Mating Combinations Connector Part Number Number of Circuits Flammability Rating Style Plug1 Housing Part No. Cap1 Housing Part No.
PAGE 86
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Contacts .6592 [16.74] .6712 [17.04] Pin diameter .039 [0.99] Material High Density Brass or Phosphor bronze Stock Thickness .008 [0.20] These contacts are to be used in MiniUniversal MATE-N-LOK Plug or Cap housings only. Pin Wire Size Ins. Dia.
PAGE 87
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Housings 1 Circuit, Free-Hanging Free-Hanging or Panel Mount .933 [23.70] .163 [4.14] Centerline spacing Related Product Data .110 [2.79] .933 [23.70] .110 [2.79] .323 [8.20] .272 [6.91] .220 [5.59] .220 [5.59] .110 [2.79] Plug .110 [2.79] 2 and 3 Circuit, In-Line .933 .933 [2.37] [23.70] .220 [5.59] .220 [5.59] [.559] .110 [2.79] [.279] .163 [.414] [4.14] .163 [4.
PAGE 88
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Housings 9, 12 and 15 Circuit, Free-Hanging or Panel Mount, Matrix .163 [4.14] Centerline spacing .933 [23.69] Related Product Data Mini-Universal MATE-N-LOK Connectors .163 [4.
PAGE 89
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Housings Hermaphroditic Free-Hanging 2, 3 and 4 Circuit Related Product Data .827 [21.0] .992 [25.19] .551 [14.0] .228 [5.8] .323 [8.20] .228 [5.8] .386 [9.80] .551 [10.40] .992 [25.19] .299 [7.59] High Density .598 [15.2] .598 [15.19] .228 [5.8] .276 [7.01] .661 [16.79] Mini-Universal MATE-N-LOK Connectors .163 [4.
PAGE 90
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Vertical PC Board Pin Headers 4, 6, 8, 10 and 12 Circuit, Dual Row 2 and 3 Circuit, In-Line .220 [5.58] .163 [4.14] Centerline spacing .531 [13.49] Housing — Nylon, white .387 [9.83] A Flammability Rating— UL94V-0 Contacts — Brass Solder tail diameter .039 [1.00] High Density A .030 [0.
PAGE 91
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Vertical PC Board Blindmate Pin Headers 4, 6, 8 and 10 Circuit, Dual Row A .163 [4.14] Centerline spacing .645 [16.38] Material Housing — Nylon, white Flammability Rating— UL94V-0 Contacts — Brass Solder tail diameter .039 [1.00] Product Specifications 108-1693 Mini-Universal MATE-N-LOK 2 Connectors 108-1694 Mini-Universal MATE-N-LOK 2 Headers .030 [0.76] .215 [5.46] .640 [16.26] .030 [0.76] .215 [5.
PAGE 92
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Right-Angle PC Board Pin Headers With Board Lock Feature 4, 6, 8, 10 and 12 Circuit, Dual Row 1, 2 and 3 Circuit, In-Line .163 [4.14] Centerline spacing .500 [12.70] Material .500 [12.70] A .030 [0.76] .145 [3.68] A .030 [0.76] .145 [3.68] Housing — Nylon, white color .225 [5.72] Flammability Rating — UL94V-0 .236 [5.99] .270 [6.86] Contacts — Brass .270 [6.86] .386 [9.80] .236 [5.
PAGE 93
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Recommended PC Board Hole Layouts for Vertical and Blindmate Headers 2 and 3 Circuit, In-Line .175 [4.44] .175 [4.44] .062 [1.57] thick board, tolerances non-accumulative .125 Dia. [3.18] .055 Dia. [1.40] Typ. Related Product Data 4, 6, 8, 10 and 12 Circuit, Dual Row .163 Typ. [4.14] 14, 16, 18, 20, 22 and 24 Circuit, Dual Row .055 ± .003 Typ. [1.40 ± .076] .125 Dia. [3.18] .163 [4.14] .055 Dia. [1.40] .
PAGE 94
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) Strain Reliefs for Plug or Cap Housings 6 and 8 Circuit Plug or Cap housing Related Product Data Housings— pages 87-89 Technical Documents— pages 83 and 205-206 Close and Lock Strain Relief around housing. Insert Locking Tab to firmly secure wires. Strain Relief High Density These Strain Reliefs may also be used with AMP-DUAC Receptacle housings on page 126. Locking Tab Mini-Universal MATE-N-LOK Connectors .
PAGE 95
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Sealed Connector System Product Facts — Sealed Connector System ■ Wire-to-wire and wire-to-board ■ Dual row, 2 to 10 positions (even only) and 16 positions ■ Mates with all standard Mini-Universal MATE-N-LOK connector housings and pin headers (except Blindmate) ■ Positive, polarized keyed and latched orientation to ease application ■ Utilizes proven MiniUniversal MATE-N-LOK contacts with existing application tooling ■ Tested to
PAGE 96
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Sealed Connector System (Continued) .320 [8.13] Plug Part Number 794894-1 (2 position shown) .599 [15.22] .486 [12.34] .386 [9.80] .163 [4.14] .220 [5.59] High Density .933 [23.70] Cap Part Number 794896-1 (2 position shown) .386 [9.80] .472 [11.99] .163 [4.14] Mini-Universal MATE-N-LOK Sealed Connector System .163 [4.14] Centerline .220 [5.59] .933 [23.
PAGE 97
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK Connectors (Continued) New: Mini Universal Gang Seals No Seal Crimping Required! Interface Seals .38± 0.10 ± 0.10 .38 [9.68 0.25] [9.68 ±±0.25] .032 Max [0.8] Dim A ± .010 [± 0.25] High Density .386 ± .010 [9.8 ± 0.25] .163 [4.14] .294± ± 0.10 .294 0.10 [7.47±±0.25] 0.25] [7.
PAGE 98
Soft Shell Pin and Socket Connectors AMP Engineering Notes 98 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C.
PAGE 99
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors Product Facts One molded piece, secondary locking plug and cap housing assemblies ■ Three-point stabilization to provide better terminal position ■ Fully polarized to provide proper plug-to-cap mating ■ Lanceless contacts for tangle-free handling ■ Toolless contact removal ■ Tin or duplex gold plated contacts ■ Available in 2 through 24 circuit sizes wire-to-wire and wire-to-board ■ Mates with standard MiniUniver
PAGE 100
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors (Continued) Current Rating Verification for 30°C Maximum Temperature Rise 100% Energized Mini-Universal MATE-N-LOK 2 Connectors .163 [4.14] Centerline High Density Maximum Current—Maximum current rating of Mini-Universal MATE-N-LOK 2 connectors is limited by the maximum operating temperature of the housings which is 105°C (gold) or 85°C (tin) including the temperature rise of the contacts which is a maximum of 30°C.
PAGE 101
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors (Continued) Housings 2 and 3 Circuit, In-Line Free-Hanging .163 [4.14] Centerline spacing .679 [17.25] Max. .163 [4.14] Related Product Data .345 [8.76] .935 [23.75] Max. A Max. A Max. .965 [24.51] Max. Cap Plug .844 [21.44] .163 [4.14] .965 [24.51] Max. Cap Housing Part Numbers UL94V-0 Nylon, White Color UL94V-2 Nylon, Natural Color Plug Cap Plug Cap A Dimension .405 10.29 .405 10.
PAGE 102
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors (Continued) Housings 9, 12 and 15 Circuit, Matrix Free-Hanging .163 [4.14] Centerline spacing .844 [21.44] Max. Related Product Data High Density Product Specifications 108-1693 Mini-Universal MATE-N-LOK 2 Connectors 108-1694 Mini-Universal MATE-N-LOK 2 Headers Performance Characteristics— pages 99-100 Contacts—page 100 Keying Plug—page 101 Technical Documents— pages 99 and 205-206 Mating Headers—pages 103-105 .345 [8.
PAGE 103
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors (Continued) Vertical PC Board Pin Headers 4, 6, 8, 10 and 12 Circuit, Dual Row 2 and 3 Circuit, In-Line .220 [5.58] .163 [4.14] Centerline spacing .531 [13.49] .175 [4.44] A .030 [0.76] Material .387 [9.83] A Housing — Nylon, white Flammability Rating— UL94V-0 Contacts — Brass Solder tail diameter .039 [1.00] .030 [.762] .175 [4.44] .531 [13.
PAGE 104
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors (Continued) Vertical PC Board Blindmate Pin Headers 4, 6, 8 and 10 Circuit, Dual Row A .163 [4.14] Centerline spacing .645 [16.38] Material .640 [16.26] .030 [0.76] .215 [5.46] .640 [16.26] .030 [0.76] .215 [5.46] Housing — Nylon, white Flammability Rating — UL94V-0 Contacts — Brass Solder tail diameter .039 [1.00] High Density Related Product Data Mini-Universal MATE-N-LOK 2 Connectors .163 [4.
PAGE 105
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors (Continued) Right-Angle PC Board Pin Headers With Board Lock Feature 4, 6, 8, 10 and 12 Circuit, Dual Row 2 and 3 Circuit, In-Line .163 [4.14] Centerline spacing .500 [12.70] .145 [3.68] Material .500 [12.70] A .030 [0.76] .145 [3.68] Housing — Nylon, white color A .030 [0.76] .225 [5.72] Flammability Rating — UL94V-0 .236 [5.99] .270 [6.86] Contacts — Brass .386 [9.80] .270 [6.86] Solder tail diameter .039 [1.
PAGE 106
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors (Continued) 2 and 3 Circuit, In-Line Recommended PC Board Hole Layouts for Vertical and Blindmate Headers .062 [1.57] thick board, tolerances non-accumulative .175 [4.44] .175 [4.44] .125 Dia. [3.18] .055 Dia. [1.40] Typ. Related Product Data 4, 6, 8, 10 and 12 Circuit, Dual Row .163 Typ. [4.14] High Density 9, 12 and 15 Circuit, Matrix 14, 16, 18, 20, 22 and 24 Circuit, Dual Row .055 ± .003 Typ. [1.40 ± .076] .
PAGE 107
Soft Shell Pin and Socket Connectors AMP Mini-Universal MATE-N-LOK 2 Connectors (Continued) Mini-Universal MATE-N-LOK 2 Connector Mating Combinations Connector Part Number Number Flammability of Rating Circuits 2 3 4 8 10 Cap1 Housing Part No.
PAGE 108
Soft Shell Pin and Socket Connectors AMP Engineering Notes 108 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C.
PAGE 109
Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors Product Facts ■ Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware ■ UL94V-0 housings ■ Plug and cap design includes molded-in polarizing feature for proper mating ■ Numbered cavities for easy circuit identification ■ Egg crate design of plug half fully encloses socket contacts, reducing shock hazard ■ Molded skirt extension on cap protects pin contacts ■ Strain
PAGE 110
Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) Performance Characteristics Current Rating Verification for 30°C Maximum Temperature Rise 100% Energized (Continued) Maximum Current—Maximum current rating of Miniature Rectangular connectors is limited by the maximum operating temperature of the housings which is 105°C including the temperature rise of the contacts which is a maximum of 30°C.
PAGE 111
Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) (MR) Miniature Rectangular Connector Mating Combinations Connector Part Number Number of Circuits Flammability Rating 2 UL94V-0 In-Line 1-640507-0 1-640517-0 3 UL94V-0 In-Line 1-640508-0 1-640518-0 4 UL94V-0 Matrix 1-640509-0 1-640519-0 6 UL94V-0 Matrix 1-640510-0 1-640520-0 9 UL94V-0 Matrix 1-640511-0 1-640521-0 12 UL94V-0 Matrix 1-640512-0 1-640522-0 15 UL94V-0 Matrix 1-640513-0
PAGE 112
Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) Contacts .790 [20.06] Pin diameter .068 [1.73] .660 [16.76] Material Phosphor bronze Stock thickness .008 [.203] Standard Socket Live Split Pin Contact Part Numbers High Density Wire Size Range AWG [mm2] Ins. Dia. Range Finish 26-24 [.12-.2] .025-.050 .635-1.27 Pre-tin 26-182 [.12-.8] .050-.115 1.27-2.
PAGE 113
Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) Housings Free-Hanging or Panel Mount 2 and 3 Circuit, In-Line 1.060 [26.92] Fingergrip .435 [11.05] .165 [4.19] Centerline spacing .290 [7.37] Material 1 Nylon, Natural (Color—Brick Red) A C 2 Flammability Rating — UL94V-0 3 Related Product Data Product Specification 108-1022 (MR) Miniature Rectangular Connectors Pin Housing (Cap) .840 [21.34] .510 .290 [12.95] [7.
PAGE 114
Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) Housings Free-Hanging or Panel Mount 9, 12 and 15 Circuit, Matrix 1.060 [26.92] Fingergrip .435 [11.05] A .165 [4.19] Centerline spacing Material .920 [23.37] .620 [15.
PAGE 115
Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) Recommended Panel Cutouts for Pin and Socket Housings F Related Product Data Product Specification 108-1022 (MR) Miniature Rectangular Connectors Housings— pages 113-114 Technical Documents— pages 109 and 205-206 C E D B A High Density View is from housing entry side Panel Thickness .068 [1.75] Max. 2 3 4 6 9 12 15 20 24 36 Panel Cutout Dimensions A .105 2.67 .105 2.67 .157 3.99 .208 5.28 .208 5.28 .225 5.
PAGE 116
Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) Strain Reliefs One Piece — Clam Shell Strain Relief Adapting Grommets IS 408-3231 (Illustrated in closed position) IS 408-3231 Material Material Flexible PVC (55/75 Durometer) black color Nylon, Natural (Color—Brick Red) Flammability Rating — UL94V-0 I.D. I.D. A B A Hinge Hinge I.D. High Density C C B 6, 9, 12, 15 and 20 Circuit Number of Circuits (MR) Miniature Rectangular Connectors .165 [4.
PAGE 117
Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) PC Board Vertical Pin Headers 2 and 3 Circuit, In-Line .165 [4.19] Centerline spacing .030 [.762] .055 .290 [7.36] .530 [13.46] [1.40] Dia. Typ. Material Housing — Nylon, Natural (Color— Brick Red) .150 [3.81] Flammability Rating — UL94V-0 A .165 Typ. [4.19] Live Pin Contacts — Phosphor bronze Solder tail diameter .040 [1.02] Recommended PC Board Hole Layout .435 [11.
PAGE 118
Soft Shell Pin and Socket Connectors AMP (MR) Miniature Rectangular Connectors (Continued) PC Board Vertical Pin Headers 20, 24 and 36 Circuit, Matrix .165 [4.19] Centerline spacing .530 [13.46] .030 [.76] Material .150 [3.81] A .055 Dia. Typ. [1.40] Housing — Nylon, Natural (Color– Brick Red) .165 [4.19] Typ. Flammability Rating — UL94V-0 Live Pin Contacts — Phosphor bronze Solder tail diameter .040 [1.02] Related Product Data High Density (MR) Miniature Rectangular Connectors .165 [4.
PAGE 119
Soft Shell Pin and Socket Connectors AMP VAL-U-LOK Connector System (Wire-to-Wire, Wire-to-Board and Wire-to-Panel) Product Facts Low cost, wire-to-wire, wire-to-board and wire-topanel connectors with 4.
PAGE 120
Soft Shell Pin and Socket Connectors AMP VAL-U-LOK Connector System (Wire-to-Wire, Wire-to-Board and Wire-to-Panel) (Continued) Contacts Wire Range (AWG) Insulation Range 26-22 .047 - .069 [1.2 - 1.75] 22-18 .060 - .122 [1.50 - 3.10] 16 .071 - .122 [1.8 - 3.10] Material & Finish Brass, Pre-Tin Phos. Brz., Pre-Tin Brass, Gold Phos. Brz., Gold Brass, Pre-Tin Phos. Brz., Pre-Tin Brass, Gold Phos. Brz., Gold Brass, Pre-Tin Phos. Brz., Pre-Tin Brass, Gold Phos. Brz.
PAGE 121
Soft Shell Pin and Socket Connectors AMP VAL-U-LOK Connector System (Wire-to-Wire, Wire-to-Board and Wire-to-Panel) (Continued) Housings — Single Row No.
PAGE 122
Soft Shell Pin and Socket Connectors AMP VAL-U-LOK Connector System (Wire-to-Wire, Wire-to-Board and Wire-to-Panel) (Continued) Housings — Double Row No.
PAGE 123
Soft Shell Pin and Socket Connectors AMP VAL-U-LOK Connector System (Wire-to-Wire, Wire-to-Board and Wire-to-Panel) (Continued) Pin Headers No.
PAGE 124
Soft Shell Pin and Socket Connectors AMP VAL-U-LOK Connector System (Wire-to-Wire, Wire-to-Board and Wire-to-Panel) (Continued) Blindmate Headers A B Dimensions C D E 2 — 4 4.2 [0.17] 8.4 [0.33] 12.6 [0.50] 16.8 [0.66] 21.0 [0.83] 25.2 [0.99] 29.4 [1.58] 33.6 [1.32] 37.8 [1.49] 42.0 [1.65] 46.2 [1.82] 5.4 [0.21] 9.6 [0.38] 13.8 [0.54] 18.0 [0.71] 22.2 [0.87] 26.4 [1.04] 30.6 [1.20] 34.8 [1.37] 39.0 [1.54] 43.2 [1.70] 47.4 [1.87] 51.6 [2.03] 9.4 [0.37] 13.6 [0.54] 17.8 [0.70] 22.0 [0.87] 26.2 [1.
PAGE 125
Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors Product Facts ■ Free-hanging or panel mount plug housings ■ Vertical header with or without mounting pegs and with or without drain holes ■ Selective loading available on vertical headers ■ 4.2 mm x 4.
PAGE 126
Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors (Continued) Receptacle Housings N x 4.2=M [N x .165=M] 4.2 [.165] 2-24 Position Housings 11.7 [.460] Accept female contacts. 4.2 [.165] Material 9.7 [.391] Housings— Nylon UL 94V-2, Natural color UL 94V-0, White color L Related Product Data 18.7 [.736] Number of Positions 2 High Density Mate with—Vertical headers (pages 128-133), right-angle headers (page 128) and plug housings (page 127). Contacts— See below.
PAGE 127
Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors (Continued) Plug Housings L 4.00 1.6 2-24 Position Housings Accept male contacts. [.098] 10.0 5.6 [.394] [.220] 9.6 Material 2.5 [.157] [.063] M [.38] Recommended Cutout for 2.00 [.079] Max. Thick Panel Housings— Nylon UL 94V-2, Natural color UL 94V-0, White color Related Product Data 23.9 Mate with—Receptacle housings (page 126) Contacts— See below. Strain Relief— See below. Technical Documents— pages 125 and 205-206 [.
PAGE 128
Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors (Continued) Vertical Header Assemblies 3.5 ±0.3 [.137 ±.012] 2, 4 and 6 Position, with and without Pegs and with and without Drain Holes 8.4 Ref. [.330] 17.8 Ref. [.700] 4.70 ±0.08 [.185 ±.003] 8.4 Ref. [.330] 5.5 ±0.1 [.217 ±.004] 2.9 [.114] Material and Finish .46 ±0.08 [.018 ±.003] 21.0 [.826] Ref. Housing— Nylon UL 94V-2, Natural color UL 94V-0, White color Contacts— 0.25 [.010] thick copper alloy 4.2 ±0.1 [.165 ±.
PAGE 129
Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors (Continued) Vertical Header Assemblies (Continued) 8 and 10 Position, with and without Pegs and with and without Drain Holes 3.5 ±0.3 [.137 ±.012] 16.8 [.661] Ref. 2.9 [.114] 26.2 [1.03] Ref. Material and Finish 4.70 ±0.08 [.185 ±.003] 29.4 [1.15] Ref. Housing— Nylon UL 94V-2, Natural color UL 94V-0, White color Contacts— 0.25 [.010] thick copper alloy 4.2 [.165] Typ. 16.8 [.661] Ref. 5.5 ±0.1 [.217 ±.004] .46 ±0.08 [.018 ±.003] 4.
PAGE 130
Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors (Continued) Vertical Header Assemblies (Continued) 3.5 ±0.3 [.137 ±.012] 12 Position, with and without Pegs and with and without Drain Holes 21.0 [.826] Ref. 30.4 [1.19] Ref. 2.9 [.114] 4.70 ±0.08 [.185 ±.003] 33.6 [1.32] Ref. Material and Finish High Density 4.2 ±0.1 [.165 ±.004] 5.5 ±0.1 [.217 ±.004] Recommended PC Board Layout 4.2 [.165] Typ. 21.0 Ref. [.826] 26.4 [1.03] Related Product Data AMP-DUAC Connectors .165 [4.
PAGE 131
Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors (Continued) Vertical Header Assemblies (Continued) 29.4 [1.15] Ref. 3.5 ±0.3 [.137 ±.012] 38.8 [1.53] Ref. 16 Position, with and without Pegs and with and without Drain Holes 2.9 [.114] 4.70 ±0.08 [.185 ±.003] 42.0 [1.65] Ref. Material and Finish 4.2 ±0.1 [.165 ±.004] 5.5 ±0.1 [.217 ±.004] Recommended PC Board Layout 29.4 Ref. [1.15] 34.8 [1.37] Related Product Data 4.2 [.165] Typ.
PAGE 132
Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors (Continued) Vertical Header Assemblies 3.5 ±0.3 [.137 ±.012] 37.8 [1.48] Ref. (Continued) 20 Position, with and without Pegs and with and without Drain Holes 50.4 [1.98] Ref. 4.2 [.165]Typ. Material and Finish Housing— Nylon UL 94V-2, Natural color UL 94V-0, White color Contacts— 0.25 [.010] thick copper alloy 47.2 [1.85] Ref. 37.8 [1.48] Ref. 4.70 ±0.08 [.185 ±.003] 2.9 [.114] .46 ±0.08 [.018 ±.003] 4.2 ±0.1 [.165 ±.004] 5.5 ±0.1 [.
PAGE 133
Soft Shell Pin and Socket Connectors AMP AMP-DUAC Connectors (Continued) Vertical Header Assemblies 3.5 ±0.3 [.137 ±.012] 46.2 [1.81] Ref. (Continued) 24 Position, with and without Pegs and with and without Drain Holes 58.8 [2.13] Ref. .46 ±0.08 [.018 ±.003] 4.2 [.165] Typ. Material and Finish 4.2 ±0.1 [.165 ±.004] Housing— Nylon UL 94V-2, Natural color UL 94V-0, White color Contacts— 0.25 [.010] thick copper alloy Recommended PC Board Layout Mate with—Receptacle housings (page 126).
PAGE 134
Soft Shell Pin and Socket Connectors AMP Engineering Notes 134 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C.