Datasheet
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
OEG
Signal Relays
n
1pole, 1A, 1form A (NO), 1 form C (CO)
n
2.54mm terminal pitch same as I.C. socket terminal pitch
n
Gold overlay AgPd alloy contact suitable for low loads
Typical applications
Telecommunications, office machine
Approvals
UL E82292, CSA LR48471, TuV R50138762 (Z)
Technical data of approved types on request
Contact Data
Contact arrangement 1 form A (NO), 1 form C (CO)
Rated voltage 24VDC, 120VAC
Max. switching voltage 24VDC, 120VAC
Rated current 1A
Switching power 120VA, 30W
Contact material AgPd Alloy
Min. recommended contact load 1mA at 1VDC
Initial contact resistance 50mΩ at 100mA, 6VDC
Frequency of operation 72000h
-1
Operate/release time max.
standard coil 5/7ms
sensitive coil 10/7ms
Electrical endurance
1A, 120VAC, resistive, 100x10
3
ops.
1A, 24VDC, resistive, 100x10
3
ops.
Contact ratings 1A, 120VAC/24VDC
Mechanical endurance 10x10
6
operations
Coil Data
Magnetic system
Coil voltage range 5 to 24VDC
Coil Data (continued)
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
Standard coil, 450mW
05 5 3.5 0.25 55 450
06 6 4.2 0.3 80 450
09 9 6.3 0.45 180 450
12 12 8.4 0.6 320 450
24 24 16.8 1.2 1.280 450
Sensitive coil, 200mW
05 5 3.75 0.5 125 200
06 6 4.5 0.6 180 200
09 9 6.75 0.9 400 200
12 12 9.0 1.2 700 200
24 24 18.0 2.4 2800 200
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Insulation Data
Initial dielectric strength
between open contacts 500V
rms
between contact and coil 1000V
rms
high insulation version (Z) 1500V
rms
Initial surge withstand voltage
between contact and coil 1500V (10/160μs)
Clearance/creepage
between contact and coil 1.5/1.76mm
Signal PCB Relay OUAZ
320
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
OEG
Catalog 1308242
Issued 3-03
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Ordering Information
Typical Part Number
B OUAZ -SS -1 12 L M ,900
1. Basic Series:
OUAZ = Miniature, sealed PC board relay.
2. Enclosure:
SS = Vented (Flux-tight)*, plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
03 = 3VDC 06 = 6VDC 12 = 12VDC
05 = 5VDC 09 = 9VDC 24 = 24VDC
5. Coil Input:
L = Sensitive D = Standard
6. Contact Arrangement:
Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO
7. Suffix:
,900 = Standard model Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
Coil Temperature Rise Operate Time Life Expectancy
PC Board Layout (Bottom View)
12
10
8
6
4
2
0.1
0.2
0.3 0.4 0.5 0.6 0.7
0.1
0.2
0.3 0.4 0.5 0.6 0.7
100
0.2
Contact Current (A)
Operation (x 10
4
)
Coil Power (W)
Coil Power (W)
Time (msec)
10
1
60
50
40
30
20
10
Temp. Rise (°C)
Release Time
Operate Time
0.4
0.6
0.8
1.0
1.2
120VAC Resistiv
e
24VDC Resistive
.441 ± .02
11.2 ± .5
.008
(.2)
.023
(.6)
.023
(.6)
.018
(.45)
.016
(.40)
.409 ± .02
10.4 ± .5
.299 ± .008
7.6 ± .2
.063
(1.6)
.098 ± .008
2.5 ± .2
.40 ± .008
10.1 ± .2
.606 ± .02
15.4 ± .5
5 – .04 DIA.
(1.0)
.397
(10.1)
.299
(7.6)
.098
(2.5)
None at present.
Our authorized distributors are more likely to stock the following items for immediate delivery.
Coil temperature riseOperate time
320
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
OEG
Catalog 1308242
Issued 3-03
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Ordering Information
Typical Part Number
B OUAZ -SS -1 12 L M ,900
1. Basic Series:
OUAZ = Miniature, sealed PC board relay.
2. Enclosure:
SS = Vented (Flux-tight)*, plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
03 = 3VDC 06 = 6VDC 12 = 12VDC
05 = 5VDC 09 = 9VDC 24 = 24VDC
5. Coil Input:
L = Sensitive D = Standard
6. Contact Arrangement:
Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO
7. Suffix:
,900 = Standard model Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
Coil Temperature Rise Operate Time Life Expectancy
PC Board Layout (Bottom View)
12
10
8
6
4
2
0.1
0.2
0.3 0.4 0.5 0.6 0.7
0.1
0.2
0.3 0.4 0.5 0.6 0.7
100
0.2
Contact Current (A)
Operation (x 10
4
)
Coil Power (W)
Coil Power (W)
Time (msec)
10
1
60
50
40
30
20
10
Temp. Rise (°C)
Release Time
Operate Time
0.4
0.6
0.8
1.0
1.2
120VAC Resistiv
e
24VDC Resistive
.441 ± .02
11.2 ± .5
.008
(.2)
.023
(.6)
.023
(.6)
.018
(.45)
.016
(.40)
.409 ± .02
10.4 ± .5
.299 ± .008
7.6 ± .2
.063
(1.6)
.098 ± .008
2.5 ± .2
.40 ± .008
10.1 ± .2
.606 ± .02
15.4 ± .5
5 – .04 DIA.
(1.0)
.397
(10.1)
.299
(7.6)
.098
(2.5)
None at present.
Our authorized distributors are more likely to stock the following items for immediate delivery.
320
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
OEG
Catalog 1308242
Issued 3-03
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Ordering Information
Typical Part Number B OUAZ -SS -1 12 L M ,900
1. Basic Series:
OUAZ = Miniature, sealed PC board relay.
2. Enclosure:
SS = Vented (Flux-tight)*, plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
03 = 3VDC 06 = 6VDC 12 = 12VDC
05 = 5VDC 09 = 9VDC 24 = 24VDC
5. Coil Input:
L = Sensitive D = Standard
6. Contact Arrangement:
Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO
7. Suffix:
,900 = Standard model Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
Coil Temperature Rise Operate Time Life Expectancy
PC Board Layout (Bottom View)
12
10
8
6
4
2
0.1
0.2
0.3 0.4 0.5 0.6 0.7
0.1
0.2
0.3 0.4 0.5 0.6 0.7
100
0.2
Contact Current (A)
Operation (x 10
4
)
Coil Power (W)
Coil Power (W)
Time (msec)
10
1
60
50
40
30
20
10
Temp. Rise (°C)
Release Time
Operate Time
0.4
0.6
0.8
1.0
1.2
120VAC Resistiv
e
24VDC Resistive
.441 ± .02
11.2 ± .5
.008
(.2)
.023
(.6)
.023
(.6)
.018
(.45)
.016
(.40)
.409 ± .02
10.4 ± .5
.299 ± .008
7.6 ± .2
.063
(1.6)
.098 ± .008
2.5 ± .2
.40 ± .008
10.1 ± .2
.606 ± .02
15.4 ± .5
5 – .04 DIA.
(1.0)
.397
(10.1)
.299
(7.6)
.098
(2.5)
None at present.
Our authorized distributors are more likely to stock the following items for immediate delivery.
Electrical endurance
C
tU